滴定与可靠的浓度
引入| English | 释义 | 拼音 |
|---|---|---|
| titre/ˈtɪtə/ | 滴定体积 | dī dìng tǐ jī |
| equivalence point/ɪˈkwɪvələns pɔɪnt/ | 等当点 | děng dāng diǎn |
What would explain this observation?
- A burette reading is not the delivered volume. The titre 滴定体积 is the difference between final and initial readings, and both readings have uncertainty.
Build the model
- A titration measures the amount of one solution needed to react with a known amount of another.
- The equation gives the mole ratio.
- An indicator endpoint approximates the equivalence point 等当点 when a suitable indicator is used.
- titre: The volume delivered between two burette readings.
- equivalence point: The point of stoichiometric reaction completion.
为什么移液管要用待转移的溶液润洗?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
移液管中残留的水会稀释待转移溶液,导致实际转移的物质的量少于预期。用待转移溶液润洗移液管,则残留液体具有正确的浓度。
将每个专业术语与其精确含义匹配。
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
利用定义区分相关物理量和过程。
Choose evidence that can test it
- Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres.
- Use concordant titres as required by the school method and report the accepted values.
In the lab: Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
哪两项习惯使该案例中的调查或模型更具说服力?
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
陈述条件和假设可使他人精确重复实验,记录支持证据则便于核查结论。隐瞒相左结果会移除挑战错误结论的证据,且单次测量无法确立更广泛的论断。
Work from known quantities
- Known: 25.0 cubic centimetres of acid reacts 1:1 with 20.0 cubic centimetres of 0.100 mol per cubic decimetre alkali. n = cV = 0.100×0.0200 = 0.00200 mol.
- Acid amount is 0.00200 mol. c = n/V = 0.00200/0.0250 = 0.0800 mol per cubic decimetre.
Your turn: Burette readings are 1.40 and 23.65 cubic centimetres. Calculate titre.
读数、物质的量之比与原溶液浓度
$V_{滴定}=V_f-V_i,\quad n=cV$
使用滴定管的初末读数和方程式中的比例。加水会稀释锥形瓶内的样品,但不改变溶质的物质的量。
滴定管读数分别为1.40和23.65立方厘米。计算消耗体积。
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
结果为 22.25 cm³。已知:滴定管读数 1.40 和 23.65 立方厘米。滴定体积 = 终读数 - 初读数 = 23.65 - 1.40 = 22.25 立方厘米。减去初读数意味着滴定管不必从零开始。
Check the conclusion and its limits
- Adding distilled water to the flask changes volume but not the transferred amount of analyte.
- Do not average a rough titre with carefully measured concordant values.
Not true: A flask must be rinsed with analyte to avoid dilution of its mole amount. The pipette delivers a fixed AMOUNT of analyte into the flask; extra water in the flask changes the volume but not the moles present, and the titration measures moles. Rinsing the flask with analyte would add unknown extra moles and spoil the result.
- A titration measures the amount of one solution needed to react with a known amount of another.
- Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres.
- Watch for: adding distilled water to the flask changes volume but not the transferred amount of analyte.
Write from the data given
- Burette readings are 1.10 and 19.85 cubic centimetres.
- Find the titre. The flask is rinsed with water, not with the analyte.
移液管向锥形瓶中加入固定量的分析物;锥形瓶中额外的水会改变体积但不改变所含物质的量,而滴定测量的是物质的量。
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
正确。移液管向锥形瓶中加入固定量的分析物;锥形瓶中额外的水会改变体积但不改变所含物质的量,而滴定测量的是物质的量。用分析物润洗锥形瓶会引入未知的额外物质的量并导致结果失效。
两次滴定管读数之间放出的体积:写出专业术语。
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
滴定体积是指在两次滴定管读数之间释放的液体体积。
滴定管读数分别为1.10和19.85立方厘米。求滴定体积,并解释为何锥形瓶用水而非待测液润洗?
滴定体积是滴定管两次读数的差值。计算基于移液管提供的量,而非用于润洗锥形瓶的水量。
滴定体积是多少?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
19.85减去1.10等于18.75立方厘米。其他选项——22.25立方厘米(课程示例中读数1.40和23.65的结果);1.10立方厘米(初始读数)。