| English | 释义 | 拼音 |
|---|---|---|
| internal energy/ɪnˈtɜːnl ˈenədʒi/ | 内能 | nèi néng |
| specific heat capacity/spəˈsɪfɪk hiːt kəˈpæsɪti/ | 比热容 | bǐ rè róng |
| specific latent heat/spəˈsɪfɪk ˈleɪtənt hiːt/ | 比潜热 | bǐ qián rè |
| density/ˈdensɪti/ | 密度 | mì dù |
Joule's paddle wheel, 1845
- In 1845 James Joule let a falling weight turn a paddle wheel inside a tank of water. The stirring warmed the water by a fraction of a degree, and he measured exactly how much.
- He showed that work and heating are two ways of transferring the same thing — energy. The unit of energy, the joule, is named after him.
The particle model
- In a solid the particles vibrate about fixed positions; in a liquid they are close but move past each other; in a gas they are far apart and move fast in all directions.
- Internal energy 内能 is the total kinetic and potential energy of all the particles. Heating raises it: either the temperature rises, or the state changes.
Match each state to how its particles behave.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
The arrangement and motion of the particles explain each state's properties.
Specific heat capacity
- The specific heat capacity 比热容 $c$ is the energy needed to raise 1 kg of a substance by 1 °C. Water's is $4200\ \dfrac{\text{J}}{\text{kg}\ ^\circ\text{C}}$, one of the highest of any common substance.
- The energy needed is $\Delta E = mc\Delta\theta$, so a graph of energy against temperature rise is a straight line with gradient $mc$.
How much energy raises 2.0 kg of water from 20 °C to 70 °C? (c = 4200)
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
$\Delta E = 2.0 \times 4200 \times 50 = 420\,000$ J.
Worked example: heating cooking oil
The graph is for 0.10 kg of cooking oil heated by an electric heater: 3000 J gives a 15 °C rise. Find the specific heat capacity.
- Gradient: $\dfrac{3000}{15} = 200\ \dfrac{\text{J}}{^\circ\text{C}}$, and this equals $mc$.
- Divide by the mass: $c = \dfrac{200}{0.10} = 2000\ \dfrac{\text{J}}{\text{kg}\ ^\circ\text{C}}$.
- Check: water would need $0.10 \times 4200 \times 15 = 6300$ J for the same rise — about twice as much, which is why oil heats up faster in a pan.
热损失会改变推算出的比热容
从0.50 kg物块获得2000 J能量、升温10 °C的例子开始,比较物块吸收的热量与电输入能量,并观察为何忽略热损失会使推算出的比热容偏大。
A 1.0 kg aluminium block gains 18 000 J and warms by 20 °C. What is its specific heat capacity, in J/(kg °C)?
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
$c = \dfrac{\Delta E}{m\Delta\theta} = \dfrac{18\,000}{1.0 \times 20} = 900$.
Changes of state
- While a substance melts or boils, energy breaks the bonds between particles, and the temperature stays constant. The heating curve has a flat section.
- The specific latent heat 比潜热 $L$ is the energy to change the state of 1 kg without a temperature change: $E = mL$. For water, melting needs $3.34 \times 10^5\ \dfrac{\text{J}}{\text{kg}}$ and boiling $2.26 \times 10^6\ \dfrac{\text{J}}{\text{kg}}$.
How much energy melts 0.50 kg of ice at 0 °C? ($L = 3.34 \times 10^5\ \dfrac{\text{J}}{\text{kg}}$)
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
$E = mL = 0.50 \times 3.34 \times 10^5 = 1.67 \times 10^5$ J.
Density and good measurements
- Density 密度 is $\rho = \dfrac{m}{V}$. For an irregular stone, find its volume by the water it pushes out of a displacement can.
- When measuring $c$, wrap the block in insulation and use a joulemeter or $E = IVt$. Energy escapes to the surroundings, so the measured $c$ is usually too high.
A stone of mass 54 g pushes 20 cm³ of water out of a displacement can. What is its density, in g/cm³?
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
$\rho = \dfrac{54}{20} = 2.7\ \dfrac{\text{g}}{\text{cm}^3}$.
A student's value for the specific heat capacity of copper is higher than the true value. What is the most likely reason?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The energy supplied is counted, but only part of it warms the block, so $\dfrac{E}{m\Delta\theta}$ comes out too large.
"The temperature rises while ice melts" is wrong. A beaker of ice and water stays at 0 °C until all the ice has melted, even with the burner on. The energy goes into breaking bonds, which raises the potential energy of the particles, not their kinetic energy.
When water boils at 100 °C, adding more energy raises its temperature above 100 °C before it has all boiled.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The temperature stays at the boiling point while the energy breaks the bonds between particles.
Heating raises internal energy: it either raises the temperature, $\Delta E = mc\Delta\theta$, or changes the state at a constant temperature, $E = mL$. A graph of energy against temperature rise has gradient $mc$. Energy lost to the surroundings makes measured values of $c$ too big.
Describe and explain the heating curve of ice heated steadily from −10 °C to 110 °C.
Explain each section, not just its shape.