| English | 释义 | 拼音 |
|---|---|---|
| photosynthesis rate/ˌfəʊtəʊˈsɪnθəsɪs reɪt/ | 光合作用速率 | guāng hé zuò yòng sù lǜ |
| Controlled variables | 控制变量 | kòng zhì biàn liàng |
Counting bubbles
- Put a piece of pondweed under water in bright light and it gives off a steady stream of tiny bubbles. Move the lamp away and they slow down.
- The bubbles are mainly oxygen, so counting them is a simple way to measure the photosynthesis rate 光合作用速率.
What gas is in the bubbles from pondweed in light?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Oxygen is a product of photosynthesis.
Required practical 5
- Place pondweed in a boiling tube of water with sodium hydrogencarbonate (which supplies CO₂). Put a lamp at a set distance.
- Count bubbles, or collect the gas in a measuring cylinder, for one minute. Repeat at different distances.
Why is sodium hydrogencarbonate added?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
CO₂ must not limit the rate.
Keep it fair
- Independent variable: light intensity (distance from the lamp).
- Controlled variables 控制变量: temperature, CO₂ concentration, same piece of pondweed. A beaker of water between lamp and tube absorbs heat from the lamp.
Classify each variable.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Change one, measure one, control the rest.
Worked example: a rate from a gas volume
At 10 cm from the lamp, 1.2 cm³ of oxygen is collected in 4 minutes.
- Rate $= \dfrac{1.2}{4} = 0.30 \, \dfrac{\text{cm}^3}{\text{min}}$.
- Repeat three times and take a mean to reduce the effect of random errors.
- Better than counting bubbles, which can be different sizes.
2.5 cm³ of gas is collected in 5 minutes. What is the rate in cm³/min?
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
2.5 ÷ 5 = 0.5.
What the results show
- The rate rises as the lamp gets closer, because light is the limiting factor.
- At very high light the rate levels off: something else, such as CO₂ or temperature, now limits it.
Change one factor, keep the others fixed
Rate rises with light intensity only until another factor limits it. Change light while CO₂ stays fixed (and temperature is controlled), so the comparison stays fair.
A hot lamp spoils the test. If the lamp warms the water, the rate rises because of temperature, not light. Use an LED or a heat shield so only light changes.
A lamp that heats the water does not affect the results.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Temperature also changes the rate.
The rate of photosynthesis in pondweed can be measured by oxygen bubbles or gas volume per minute. Change only light intensity; keep temperature and CO₂ constant. The rate rises with light until another factor limits it.
Suggest two improvements to an experiment that counts pondweed bubbles.
Each improvement with a reason.