国际文凭组织 · IB Diploma
设计技术 · HL
本课程的文件、样卷和课程大纲。
讲义、练习卷和幻灯片
共享主题文档保留其原始课程和主题名称。请使用所选考试局的考纲来确定覆盖范围、等级和考试要求。
练习页 (11)
演示文稿幻灯片 (4)
习题讲解幻灯片 (11)
- 1.1 Design processes · Walk-through
- 1.2 Ergonomics and anthropometrics · Walk-through
- 1.3 Cognitive ergonomics · Walk-through
- 2.1 Modelling and prototyping · Walk-through
- 2.2 Tolerances and testing · Walk-through
- 2.3 Materials and their properties · Walk-through
- 2.4 Manufacturing · Walk-through
- 3.1 Sustainability · Walk-through
- 3.2 Designing for a circular economy · Walk-through
- 3.3 Innovation and ethics · Walk-through
- 4.1 The design project · Walk-through
课程单元与学习目标
这些课程教授选定的教学目标。请检查剩余的覆盖缺口;本材料并非完整的备考方案。
A · 设计理论
- Designing the fit between people, tasks and products.
- Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
- Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
- Measurement of human body dimensions for a specified population and method.
- A clearance dimension often needs to consider larger relevant body dimensions, while reach can require smaller relevant dimensions. Neither principle automatically selects a universal percentile. The measured population, posture, clothing, capability and task determine relevance. Consider physical, perceptual and cognitive demands together rather than assuming body size explains every usability issue.
- Define a consenting user group and task. Use attributed data or anonymous teacher-approved measurements, record measurement posture and units, and test safe low-fidelity models before construction. Include users whose access needs differ. Set measurable acceptance criteria and retain qualitative feedback about grip, visibility and comprehension alongside dimensions.
- 人机工程学
- 研究人、任务与系统之间相互作用以指导设计的学科。
- 规格说明书
- 拟议解决方案应满足的可测量需求
- 人体测量学
- 针对特定人群和方法的人体尺寸测量。
B · 设计实践
- A developing version used to test a solution.
- State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
- Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
- The allowed range of variation in a specified dimension.
- For a worst-case clearance model, subtract the largest shaft from the smallest hole for minimum clearance, and the smallest shaft from the largest hole for maximum clearance. The calculation assumes the stated dimensional limits and ideal geometry. Shape, alignment, temperature and measurement uncertainty can affect actual assembly.
- Use safe school-made models or a provided dimension dataset. Specify dimension units, nominal values and limits before testing. Measure with an appropriate calibrated instrument at agreed positions, record every result and classify against the specified range. Retain rejected pieces and explain whether the problem concerns the design limits, process variation or measurement method.
- 原型
- 用于测试解决方案的开发版本
- 迭代的示例
- 由证据和反复测试指导的修订
- 耐受
- 指定维度允许的变动范围。
- clearance(清除/批准)
- 按指定模型计算的配合件之间的间隙空间。
C · 设计情境
- Design supporting separation and replacement of parts.
- Compare a common service over a stated lifetime. Separate fixed tooling cost from cost per item. Include repair, energy, transport and realistic end-of-life pathways rather than using a recycled label as the whole judgement.
- Create a bill of materials and an annotated assembly plan. Test whether a worn part can be replaced with normal tools. For HL project development, evaluate production feasibility and commercial assumptions against the applicable cohort guide.
- 易拆解设计
- 设计支持部件分离和更换
- 耐受
- 允许的尺寸变化量
Project · 设计项目
- Designing the fit between people, tasks and products.
- Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
- Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
- A developing version used to test a solution.
- State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
- Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
- 人机工程学
- 设计人、任务与产品之间的适配性
- 规格说明书
- 拟议解决方案应满足的可测量需求
- 原型
- 用于测试解决方案的开发版本
- 迭代的示例
- 由证据和反复测试指导的修订
备考指南
- The official 2027 update confirms design in theory, design in practice and design in context.
- Do not display old 2016 Topics 1–10 or its 40% design-project model as the current 2027 assessment.
- The school project needs user evidence, measurable specification, concepts, supervised prototype/testing and evaluation; written diagnostics cannot replace it.
- SL/HL objective and assessment differences remain unverified until current guide retrieval succeeds.
仍需教学覆盖内容
- Exact 2027 topic codes and SL/AHL scope await the full guide.
- Exact 2027 modelling/material/production objectives await the full guide.
- Exact 2027 social/environmental/commercial objectives and AHL distinctions await the guide.
- Use a real school-supervised design problem; current rubric and SL/HL project demands await the guide.
课程大纲和样件文件
课程资料
课程准备
文档已提供。并非所有课程都具备考试局特定的注释、测评及交互式历年真题练习。
课程 →