Bỏ qua nội dung

Tổ chức Baccalaureate Quốc tế · IB Diploma

Design Technology · SL

Giấy thi, mẫu đề và tài liệu chương trình cho khóa học này.

← Các kỳ thi

Tài liệu in, bài tập và slide

Các tài liệu chủ đề chia sẻ giữ nguyên tên khóa học và chủ đề nguồn gốc. Sử dụng quy chuẩn của hội đồng bạn đã chọn để xác định phạm vi, cấp độ và yêu cầu kỳ thi.

Tài liệu hướng dẫn · Tổ chức Baccalaureate Quốc tế · IB Diploma · Design Technology · SL (4)
Phiếu bài tập · Tổ chức Baccalaureate Quốc tế · IB Diploma · Design Technology · SL (11)
Slide thuyết trình · Tổ chức Baccalaureate Quốc tế · IB Diploma · Design Technology · SL (4)
Slide hướng dẫn làm bài tập · Tổ chức Baccalaureate Quốc tế · IB Diploma · Design Technology · SL (11)

Đơn vị học phần và mục tiêu học tập

Các bài học này dạy các mục tiêu chương trình đã chọn. Hãy kiểm tra các lỗ hổng bao phủ còn sót lại; tài liệu này không phải là chương trình chuẩn bị hoàn chỉnh.

A · Thiết kế trong lý thuyết
  • Designing the fit between people, tasks and products.
  • Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
  • Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
  • Measurement of human body dimensions for a specified population and method.
  • A clearance dimension often needs to consider larger relevant body dimensions, while reach can require smaller relevant dimensions. Neither principle automatically selects a universal percentile. The measured population, posture, clothing, capability and task determine relevance. Consider physical, perceptual and cognitive demands together rather than assuming body size explains every usability issue.
  • Define a consenting user group and task. Use attributed data or anonymous teacher-approved measurements, record measurement posture and units, and test safe low-fidelity models before construction. Include users whose access needs differ. Set measurable acceptance criteria and retain qualitative feedback about grip, visibility and comprehension alongside dimensions.
ergonomics (nhân trắc học)
Nghiên cứu tương tác giữa con người, nhiệm vụ và hệ thống để hỗ trợ thiết kế
đặc tả kỹ thuật
Các yêu cầu đo lường được mà giải pháp đề xuất cần đáp ứng
đồng hồ học con người
Đo lường kích thước cơ thể người cho một quần thể và phương pháp cụ thể
B · Thiết kế trong thực tiễn
  • A developing version used to test a solution.
  • State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
  • Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
  • The allowed range of variation in a specified dimension.
  • For a worst-case clearance model, subtract the largest shaft from the smallest hole for minimum clearance, and the smallest shaft from the largest hole for maximum clearance. The calculation assumes the stated dimensional limits and ideal geometry. Shape, alignment, temperature and measurement uncertainty can affect actual assembly.
  • Use safe school-made models or a provided dimension dataset. Specify dimension units, nominal values and limits before testing. Measure with an appropriate calibrated instrument at agreed positions, record every result and classify against the specified range. Retain rejected pieces and explain whether the problem concerns the design limits, process variation or measurement method.
bản mẫu
Phiên bản đang phát triển dùng để thử nghiệm giải pháp
lặp lại
Sửa đổi dựa trên bằng chứng và kiểm tra lặp lại
chịu đựng
Phạm vi biến thiên cho phép của một kích thước được quy định
làm sạch
Khoảng cách không gian giữa các chi tiết ghép nối dưới mô hình được nêu
C · Thiết kế trong bối cảnh
  • Design supporting separation and replacement of parts.
  • Compare a common service over a stated lifetime. Separate fixed tooling cost from cost per item. Include repair, energy, transport and realistic end-of-life pathways rather than using a recycled label as the whole judgement.
  • Create a bill of materials and an annotated assembly plan. Test whether a worn part can be replaced with normal tools. For HL project development, evaluate production feasibility and commercial assumptions against the applicable cohort guide.
thiết kế để tháo lắp
Thiết kế hỗ trợ tách rời và thay thế linh kiện
chịu đựng
Sự sai lệch kích thước cho phép
Project · Dự án thiết kế
  • Designing the fit between people, tasks and products.
  • Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
  • Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
  • A developing version used to test a solution.
  • State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
  • Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
ergonomics (nhân trắc học)
Thiết kế sự phù hợp giữa con người, công việc và sản phẩm
đặc tả kỹ thuật
Các yêu cầu đo lường được mà giải pháp đề xuất cần đáp ứng
bản mẫu
Phiên bản đang phát triển dùng để thử nghiệm giải pháp
lặp lại
Sửa đổi dựa trên bằng chứng và kiểm tra lặp lại

Chuẩn bị cho kỳ thi này

  • The official 2027 update confirms design in theory, design in practice and design in context.
  • Do not display old 2016 Topics 1–10 or its 40% design-project model as the current 2027 assessment.
  • The school project needs user evidence, measurable specification, concepts, supervised prototype/testing and evaluation; written diagnostics cannot replace it.
  • SL/HL objective and assessment differences remain unverified until current guide retrieval succeeds.

Vẫn cần bổ sung nội dung giảng dạy

  • Exact 2027 topic codes and SL/AHL scope await the full guide.
  • Exact 2027 modelling/material/production objectives await the full guide.
  • Exact 2027 social/environmental/commercial objectives and AHL distinctions await the guide.
  • Use a real school-supervised design problem; current rubric and SL/HL project demands await the guide.

Quy chuẩn và tài liệu mẫu

Tài liệu khóa học

Chuẩn bị khóa học

Tài liệu có sẵn. Ghi chú theo từng hội đồng, bài đánh giá và luyện tập đề thi quá khứ tương tác chưa khả dụng cho tất cả các môn học.

Bài học →

Đăng nhập hoặc tạo tài khoản

IGCSE, A-Level & AP