Bỏ qua nội dung

Pearson Edexcel · International A-Level

Vật lý

Giấy thi, mẫu đề và tài liệu chương trình cho khóa học này.

← Các kỳ thi

Mã chứng chỉ: XPH11 / YPH11

Giấy thi quá khứ gần đây

78 cặp giấy thi và phương án chấm điểm

Duyệt giấy thi và phương án chấm điểm →

Tài liệu in, bài tập và slide

Các tài liệu chủ đề chia sẻ giữ nguyên tên khóa học và chủ đề nguồn gốc. Sử dụng quy chuẩn của hội đồng bạn đã chọn để xác định phạm vi, cấp độ và yêu cầu kỳ thi.

Tài liệu hướng dẫn · Pearson Edexcel · International A-Level · Physics (6)
Phiếu bài tập · Pearson Edexcel · International A-Level · Physics (38)
Slide thuyết trình · Pearson Edexcel · International A-Level · Physics (6)
Slide hướng dẫn làm bài tập · Pearson Edexcel · International A-Level · Physics (69)
Hướng dẫn giảng dạy · Pearson Edexcel · International A-Level · Physics (1)
Tài liệu hướng dẫn · Vật lý A-Level (25)
Phiếu bài tập · Vật lý A-Level (106)
Slide thuyết trình · Vật lý A-Level (25)
Slide hướng dẫn làm bài tập · Vật lý A-Level (202)

Đơn vị học phần và mục tiêu học tập

Các bài học này dạy các mục tiêu chương trình đã chọn. Hãy kiểm tra các lỗ hổng bao phủ còn sót lại; tài liệu này không phải là chương trình chuẩn bị hoàn chỉnh.

1 · Cơ học và Vật liệu
  • Rate of change of displacement.
  • The gradient of a displacement-time graph is velocity. The area under a velocity-time graph gives displacement. A constant-acceleration formula is valid only when its assumption is justified.
  • Choose a positive direction and state it. Use a light gate or video with a known scale and frame interval for repeatable motion measurements. Avoid assuming hand timing is exact over very short intervals.
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
  • Energy transferred per unit time.
  • Define the system and useful output before calculating efficiency. Doubling speed quadruples kinetic energy at constant mass. Power describes transfer per time, not total energy.
  • Measure a lifting height and load, time the lift, and record electrical input with suitable instruments. Repeat trials and account for heating or friction as transfers, not missing energy.
vận tốc
Tốc độ thay đổi của độ dịch chuyển
gia tốc
Tốc độ biến thiên của vận tốc.
động lượng
Khối lượng nhân với vận tốc
lực hợp
Tổng vectơ của các lực tác dụng lên một vật.
công suất
Năng lượng truyền theo đơn vị thời gian
đầu ra hữu ích chia cho đầu vào tổng cộng
Công dụng hữu ích chia cho tổng đầu vào
2 · Sóng và Điện
  • Distance between successive points in phase.
  • At a boundary, frequency stays fixed by the source. A change of speed changes wavelength. Refraction follows from speed differences; angles are measured from the normal.
  • Measure several wavelengths and divide to reduce fractional reading uncertainty. Use a ray box with a normal drawn at the boundary. Keep the beam away from eyes and record incident and refracted angles clearly.
  • Rate of flow of charge.
  • Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
  • Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
  • A quantum of electromagnetic radiation.
  • Use photon energy = Planck constant × frequency. Maximum kinetic energy = photon energy - work function. Increasing intensity at fixed frequency increases photon arrival rate, not individual photon energy.
  • Read axes carefully on a stopping-potential or kinetic-energy graph. Identify threshold frequency from the zero-energy intercept. State the metal and experimental conditions because work function is material-specific.
bước sóng
Khoảng cách giữa các điểm liên tiếp cùng pha
tần số
Số dao động trong một đơn vị thời gian.
dòng điện
Tốc độ dòng điện tích
hiệu điện thế
Năng lượng truyền theo mỗi đơn vị điện tích
photon
Một lượng tử bức xạ điện từ
hàm công
Năng lượng bề mặt tối thiểu cần thiết để giải phóng electron
3 · Kỹ năng Thực hành Vật lý I
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
sự không chắc chắn
Giới hạn định lượng đối với kết quả đo lường
sai số hệ thống
Độ lệch đo lường nhất quán
4 · Nâng cao Cơ học, Trường và Hạt
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
  • Creation of emf by changing flux linkage.
  • Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
  • Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
  • A description of gravitational force per unit mass.
  • For a point mass or outside a spherical mass, field strength follows an inverse-square distance dependence. Use distance from the centre, not height above the surface alone.
  • State the circular-orbit approximation and ignore atmospheric drag only when justified. Draw the force toward the central body and velocity tangential to the orbit. Do not add an outward force merely because the path is circular.
động lượng
Khối lượng nhân với vận tốc
lực hợp
Tổng vectơ của các lực tác dụng lên một vật.
hướng dẫn ban đầu
Sự tạo ra suất điện động do thay đổi thông lượng từ
máy biến áp
Một thiết bị truyền năng lượng giữa các cuộn dây thông qua sự thay đổi từ thông.
trường hấp dẫn
Mô tả lực hấp dẫn trên một đơn vị khối lượng
lực lượng hướng tâm
Lực hợp hướng về tâm của quỹ đạo cong
5 · Nhiệt động lực học, Bức xạ, Dao động và Vũ trụ học
  • Energy per mass per temperature rise.
  • Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
  • Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
  • Temperature on the kelvin scale.
  • At fixed amount and volume, pressure is proportional to kelvin temperature. At fixed temperature and amount, pressure is inversely proportional to volume. State which quantities are fixed before choosing a relationship.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
  • Time for activity or undecayed population to halve.
  • Subtract background counts measured over the same time interval. Distinguish irradiation from contamination. Shielding, distance and reduced exposure time can reduce risk under a school-controlled procedure.
  • Use teacher-managed sources and the school radiation rules. Record count duration and repeat background measurements. Do not extrapolate a half-life from one nucleus or from uncorrected readings.
  • A large response to periodic forcing near a natural frequency.
  • Velocity is greatest near equilibrium for ideal SHM, while acceleration magnitude is greatest at extreme displacement. Resonance can occur near the natural frequency under periodic driving, with amplitude limited by damping.
  • Measure time for several complete oscillations and divide. Define a cycle consistently and use a small displacement when the model requires it. Keep pendulum paths clear and record damping effects rather than assuming perfect motion.
  • Total emitted power.
  • For isotropic emission without absorption, flux follows an inverse-square relationship with distance. Observed brightness alone therefore cannot establish luminosity.
  • Keep distance units consistent, identify which quantities are intrinsic to the star, and distinguish observational evidence from a model of stellar evolution. Do not confuse a red giant stage with every possible final remnant.
nhiệt dung riêng
Năng lượng trên mỗi khối lượng trên mỗi độ tăng nhiệt độ
nhiệt ẩn
Năng lượng liên quan đến sự chuyển trạng thái
nhiệt độ tuyệt đối
Nhiệt độ trên thang đo Kelvin
chất khí lý tưởng
Mô hình khí với các giả thiết đơn giản hóa được quy định
thời gian bán rã
Thời gian để hoạt động hoặc quần thể chưa phân rã giảm một nửa
bức xạ nền
Bức xạ đo được tách biệt khỏi nguồn đang nghiên cứu.
cộng hưởng
Phản ứng lớn khi chịu kích thích tuần hoàn gần tần số riêng
giảm dao động
Sự truyền năng lượng ra khỏi hệ dao động
độ sáng
Tổng công suất phát ra
thông lượng
Công suất thu nhận trên mỗi đơn vị diện tích.
6 · Kỹ năng Thực hành Vật lý II
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
sự không chắc chắn
Giới hạn định lượng đối với kết quả đo lường
sai số hệ thống
Độ lệch đo lường nhất quán

Chuẩn bị cho kỳ thi này

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.
  • This package uses the 2018 specification, current for these assessments. Pearson announces first teaching of a redeveloped course from September 2027; do not mix its future content into the current Unit 1–6 route.

Vẫn cần bổ sung nội dung giảng dạy

  • Full material stress/strain, fluid and mechanical statement coverage remains.
  • Full superposition, quantum wave evidence, resistivity/emf and network statements remain.
  • All AS core practicals and written graph/design objectives remain.
  • Circular motion, electric/magnetic field calculations, capacitors and particle physics remain.
  • Full thermodynamic/radiation/stellar objectives remain.
  • Full A2 practical design, transformations and uncertainty analysis remain.

Quy chuẩn và tài liệu mẫu

Tài liệu khóa học

Chuẩn bị khóa học

Tài liệu có sẵn. Ghi chú theo từng hội đồng, bài đánh giá và luyện tập đề thi quá khứ tương tác chưa khả dụng cho tất cả các môn học.

Bài học →

Đăng nhập hoặc tạo tài khoản

IGCSE, A-Level & AP