Bỏ qua nội dung

Pearson Edexcel · International A-Level

Hóa học

Giấy thi, mẫu đề và tài liệu chương trình cho khóa học này.

← Các kỳ thi

Mã chứng chỉ: XCH11 / YCH11

Giấy thi quá khứ gần đây

77 cặp giấy thi và phương án chấm điểm

Duyệt giấy thi và phương án chấm điểm →

Tài liệu in, bài tập và slide

Các tài liệu chủ đề chia sẻ giữ nguyên tên khóa học và chủ đề nguồn gốc. Sử dụng quy chuẩn của hội đồng bạn đã chọn để xác định phạm vi, cấp độ và yêu cầu kỳ thi.

Tài liệu hướng dẫn · Pearson Edexcel · International A-Level · Chemistry (6)
Phiếu bài tập · Pearson Edexcel · International A-Level · Chemistry (73)
Slide thuyết trình · Pearson Edexcel · International A-Level · Chemistry (6)
Slide hướng dẫn làm bài tập · Pearson Edexcel · International A-Level · Chemistry (93)
Hướng dẫn giảng dạy · Pearson Edexcel · International A-Level · Chemistry (1)
Tài liệu hướng dẫn · Hóa học A-Level (37)
Phiếu bài tập · Hóa học A-Level (90)
Slide thuyết trình · Hóa học A-Level (37)
Slide hướng dẫn làm bài tập · Hóa học A-Level (165)

Đơn vị học phần và mục tiêu học tập

Các bài học này dạy các mục tiêu chương trình đã chọn. Hãy kiểm tra các lỗ hổng bao phủ còn sót lại; tài liệu này không phải là chương trình chuẩn bị hoàn chỉnh.

1 · Cấu trúc, Liên kết và Giới thiệu về Hóa hữu cơ
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
mol
Đơn vị SI của lượng chất
chất phản ứng giới hạn
Chất phản ứng giới hạn lượng sản phẩm có thể tạo thành
liên kết ion
Lực hút giữa các ion mang điện tích trái dấu
electron liên hợp
Một electron không bị giới hạn trong một nguyên tử hoặc liên kết cụ thể
nhóm chức
Một nhóm nguyên tử quyết định các phản ứng đặc trưng
đồng phân
Một hợp chất chia sẻ cùng công thức nhưng khác nhau về cấu trúc
2 · Năng hóa học, Hóa học Nhóm, Halogenohydrocarbon và Alcohol
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
exothermic (tỏa nhiệt)
Chuyển năng lượng ra môi trường xung quanh
biến thiên enthalpy
Biến đổi nhiệt ở áp suất không đổi cho một quá trình xác định
oxy hóa
Sự mất đi electron
khử
Sự thu nhận electron
năng lượng hoạt hóa
Rào cản năng lượng cho một đường phản ứng
tỷ lệ
Biến đổi của đại lượng đo được trên đơn vị thời gian
nhóm chức
Một nhóm nguyên tử quyết định các phản ứng đặc trưng
đồng phân
Một hợp chất chia sẻ cùng công thức nhưng khác nhau về cấu trúc
3 · Kỹ năng Thực hành Hóa học I
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
thể tích chuẩn độ
Thể tích chất lỏng được cung cấp giữa hai chỉ số đọc buret
điểm tương đương
Điểm hoàn tất phản ứng theo tỷ lệ hóa học chính xác
sắc ký
Tách biệt sử dụng hai pha
Rf
Khoảng cách điểm chia cho khoảng cách mặt dung môi
sự không chắc chắn
Giới hạn định lượng đối với kết quả đo lường
sai số hệ thống
Độ lệch đo lường nhất quán
4 · Tốc độ phản ứng, Cân bằng và Hóa hữu cơ nâng cao
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • A state with equal forward and reverse reaction rates.
  • A concentration or pressure change disturbs the balance. The system responds toward a new equilibrium. Temperature changes can also change the equilibrium constant; a catalyst changes how quickly equilibrium is reached.
  • State the balanced equation and whether the forward reaction is exothermic before predicting a temperature effect. Count gas coefficients when considering pressure; pressure has no composition effect when gaseous amounts are equal on both sides.
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
năng lượng hoạt hóa
Rào cản năng lượng cho một đường phản ứng
tỷ lệ
Biến đổi của đại lượng đo được trên đơn vị thời gian
cân bằng
Trạng thái mà tốc độ phản ứng thuận và nghịch bằng nhau
phản ứng thuận nghịch
Phản ứng có thể diễn ra theo cả hai chiều
exothermic (tỏa nhiệt)
Chuyển năng lượng ra môi trường xung quanh
biến thiên enthalpy
Biến đổi nhiệt ở áp suất không đổi cho một quá trình xác định
nhóm chức
Một nhóm nguyên tử quyết định các phản ứng đặc trưng
đồng phân
Một hợp chất chia sẻ cùng công thức nhưng khác nhau về cấu trúc
5 · Kim loại chuyển tiếp và Hóa học Nitrogen hữu cơ
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
oxy hóa
Sự mất đi electron
khử
Sự thu nhận electron
nhóm chức
Một nhóm nguyên tử quyết định các phản ứng đặc trưng
đồng phân
Một hợp chất chia sẻ cùng công thức nhưng khác nhau về cấu trúc
sắc ký
Tách biệt sử dụng hai pha
Rf
Khoảng cách điểm chia cho khoảng cách mặt dung môi
6 · Kỹ năng Thực hành Hóa học II
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
thể tích chuẩn độ
Thể tích chất lỏng được cung cấp giữa hai chỉ số đọc buret
điểm tương đương
Điểm hoàn tất phản ứng theo tỷ lệ hóa học chính xác
sự không chắc chắn
Giới hạn định lượng đối với kết quả đo lường
sai số hệ thống
Độ lệch đo lường nhất quán

Chuẩn bị cho kỳ thi này

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.

Vẫn cần bổ sung nội dung giảng dạy

  • Full topic 1–5 statement coverage remains.
  • Intermolecular forces, Groups 1/2/7, halogenoalkanes and alcohol chemistry remain.
  • All AS core practicals, preparation methods and practical-paper objectives remain.
  • Rate equations, entropy, acid-base equilibria, carbonyls/acids/chirality remain.
  • Transition-metal complexes, electrode potentials, organic nitrogen, synthesis and spectroscopy remain.
  • A2 synthesis, purification, quantitative analysis and practical-paper coverage remain.

Quy chuẩn và tài liệu mẫu

Tài liệu khóa học

Chuẩn bị khóa học

Tài liệu có sẵn. Ghi chú theo từng hội đồng, bài đánh giá và luyện tập đề thi quá khứ tương tác chưa khả dụng cho tất cả các môn học.

Bài học →

Đăng nhập hoặc tạo tài khoản

IGCSE, A-Level & AP