Bỏ qua nội dung

AQA · GCSE

Toán học

Giấy thi, mẫu đề và tài liệu chương trình cho khóa học này.

← Các kỳ thi

Mã chứng chỉ: 8300

Giấy thi quá khứ gần đây

48 cặp giấy thi và phương án chấm điểm

Duyệt giấy thi và phương án chấm điểm →

Tài liệu in, bài tập và slide

Các tài liệu chủ đề chia sẻ giữ nguyên tên khóa học và chủ đề nguồn gốc. Sử dụng quy chuẩn của hội đồng bạn đã chọn để xác định phạm vi, cấp độ và yêu cầu kỳ thi.

Tài liệu hướng dẫn · AQA · GCSE · Mathematics (6)
Phiếu bài tập · AQA · GCSE · Mathematics (106)
Slide thuyết trình · AQA · GCSE · Mathematics (6)
Slide hướng dẫn làm bài tập · AQA · GCSE · Mathematics (111)
Tài liệu hướng dẫn · Toán học IGCSE (9)
Phiếu bài tập · Toán học IGCSE (125)
Slide thuyết trình · Toán học IGCSE (9)
Slide hướng dẫn làm bài tập · Toán học IGCSE (158)

Đơn vị học phần và mục tiêu học tập

Các bài học này dạy các mục tiêu chương trình đã chọn. Hãy kiểm tra các lỗ hổng bao phủ còn sót lại; tài liệu này không phải là chương trình chuẩn bị hoàn chỉnh.

3.1 · Số
  • Exact arithmetic and estimation: A prime number that divides the integer exactly.
  • Indices, surds and standard form: The power to which a base is raised.
  • Accuracy, bounds and compound measures: The smallest possible value consistent with a stated rounding rule.
  • Signed numbers, place value and operation order: A number that multiplies a nonzero original number to give 1.
  • Exact fractions and mixed-number operations: A fraction whose numerator is at least as large as its positive denominator.
  • Systematic lists and the product rule: A list made in a fixed order so every allowed outcome appears exactly once.
  • Exact surds and rationalising denominators: An irrational root kept in exact form rather than replaced by a rounded decimal.
  • Terminating and recurring decimal conversions: A decimal with a digit or block of digits that repeats forever.
  • Metric and compound-unit conversions: The multiplier that expresses the same quantity in another unit.
  • Estimation, rounding and simple error intervals: A digit counted from the first nonzero digit when reporting numerical precision.
  • Ratio shares and fraction operators: A comparison that states the relative numbers of equal-sized parts.
ước nguyên tố
Một số nguyên tố chia hết số nguyên một cách chính xác.
index
Số mũ mà cơ số được nâng lên.
giới hạn dưới
Giá trị nhỏ nhất phù hợp với quy tắc làm tròn đã nêu.
nghịch đảo
Một số nhân với một số ban đầu khác không để cho kết quả là 1.
phân số giả
Một phân số mà tử số lớn hơn hoặc bằng mẫu số dương của nó.
danh sách có hệ thống
Một danh sách được lập theo thứ tự cố định sao cho mỗi kết quả hợp lệ xuất hiện đúng một lần.
biểu thức căn thức
Một căn vô tỷ được giữ ở dạng chính xác thay vì thay bằng số thập phân làm tròn.
số thập phân chu kỳ
Một số thập phân có một chữ số hoặc khối chữ số lặp lại mãi mãi.
hệ số chuyển đổi
Hệ số nhân biểu thị cùng một đại lượng trong một đơn vị khác.
chữ số có nghĩa
Một chữ số được tính từ chữ số khác không đầu tiên khi báo cáo độ chính xác của số.
công bội
Một sự so sánh nêu rõ các số tương đối của các phần có kích thước bằng nhau.
3.2 · Đại số
  • Equations, identities and rearrangement: An equality that holds for every allowed value of its variable.
  • Quadratics and inequalities: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.
  • Simultaneous equations and feasible regions: Combining equations to remove one variable while retaining the same solutions.
  • Coordinate geometry and tangents: The change in y divided by the corresponding change in x.
  • Sequences, series and recurrence: The constant multiplier between consecutive terms of a geometric sequence.
  • Algebraic notation, substitution and vocabulary: The numerical factor multiplying a variable term.
  • Collecting, expanding and factorising expressions: Rewrite an expression as a product of factors.
  • Rearranging formulae and checking the subject: The quantity written alone on one side of a formula.
  • Identities, equivalence and algebraic arguments: An expression with the same value as another for every allowed input.
  • Function machines and reversing operations: The value supplied to a rule before its operations are carried out.
  • Domains, inverses and composition: The set of allowed inputs to a function.
  • Coordinate quadrants and basic graph families: A line approached by a graph without a finite crossing in the stated example.
  • Exponential and degree-based trigonometric graphs: The input interval after which a repeating graph has the same values again.
  • Translations and reflections of function graphs: Move every point of a graph by the same horizontal and vertical displacement.
  • Distance-time graphs and contextual intersections: Not changing position over the time interval described.
  • Graphical gradients and area estimates: The slope of a tangent, used to estimate a curve’s rate at one input.
  • Origin-centred circles and tangent equations: The slope of a radius joining the centre to a point on the circle.
  • Numerical iteration for equation roots: Repeat a rule, using the previous output as the next input.
  • Linear inequalities and number-line solutions: All inputs that satisfy the stated condition.
  • Quadratic inequalities and two-variable regions: The equality line separating values that satisfy an inequality from those that do not.
  • Figurate, geometric and Fibonacci-type sequences: A rule that generates new terms from preceding terms.
  • Quadratic nth terms and surd-ratio progressions: The difference between consecutive first differences of a sequence.
  • Algebraic fractions and excluded values: An input for which an original denominator or divisor is zero.
bản sắc
Một đẳng thức đúng với mọi giá trị cho phép của biến số.
delta (discriminant)
Đại lượng b²-4ac xác định nghiệm thực của ax²+bx+c=0.
loại trừ
Kết hợp các phương trình để loại bỏ một ẩn số trong khi giữ nguyên tập nghiệm.
hệ số góc
Độ biến thiên của y chia cho độ biến thiên tương ứng của x.
công bội
Thừa số chung giữa hai số hạng liên tiếp của cấp số nhân.
hệ số
Hệ số nhân (hệ số) đứng trước một số hạng chứa biến.
phân tích nhân tử
Viết lại biểu thức dưới dạng tích của các thừa số.
đề tài
Đại lượng chỉ nằm ở một vế của công thức.
biểu thức tương đương
Biểu thức có cùng giá trị với biểu thức khác đối với mọi giá trị đầu vào hợp lệ.
đầu vào
Giá trị được cung cấp cho một quy tắc trước khi thực hiện các phép toán.
miền xác định
Tập hợp các giá trị đầu vào được phép của một hàm số.
tiếp tuyến
Một đường thẳng mà đồ thị tiệm cận nhưng không cắt tại vô số điểm trong ví dụ đã cho.
chu kỳ
Khoảng giá trị đầu vào sau đó đồ thị lặp lại có cùng các giá trị.
phép tịnh tiến đồ thị
Dịch chuyển mọi điểm trên đồ thị theo cùng một độ dịch chuyển ngang và dọc.
đứng yên
Không thay đổi vị trí trong khoảng thời gian được mô tả.
độ dốc tiếp tuyến
Độ dốc của tiếp tuyến, dùng để ước lượng tốc độ biến thiên của đường cong tại một giá trị đầu vào.
gradient bán kính
Độ dốc của bán kính nối tâm với một điểm trên đường tròn.
lặp lại
Lặp lại một quy tắc, sử dụng kết quả trước đó làm giá trị đầu vào cho bước tiếp theo.
tập nghiệm
Tất cả các giá trị đầu vào thỏa mãn điều kiện đã nêu.
đường biên
Đường phân cách biểu diễn sự bằng nhau, tách biệt các giá trị thỏa mãn bất phương trình khỏi các giá trị không thỏa mãn.
quy tắc truy hồi
Một quy tắc tạo ra các số hạng mới dựa trên các số hạng đứng trước nó.
sai số bậc hai
Hiệu giữa hai hiệu bậc nhất liên tiếp của một dãy số.
giá trị bị loại bỏ
Một giá trị đầu vào khiến mẫu số hoặc số chia ban đầu bằng không.
3.3 · Tỷ lệ, tỷ số và tốc độ biến thiên
  • Percentages, ratio and proportional reasoning: A factor that performs a percentage change in one multiplication.
  • Regression, financial models and residuals: The observed value minus the value predicted by a fitted model.
  • Ratios, equivalent proportions and mixtures: A comparison of one share with the combined quantity.
  • Scale drawings and maps: The ratio of a drawing length to its corresponding real length.
  • Direct and inverse proportional relationships: The fixed multiplier in a stated proportional relationship.
  • Rates, unit prices, density and pressure: Mass per unit volume, with both units stated.
  • Length, area and volume scale factors: The squared length factor between similar shapes.
  • Simple interest, compound growth and decay: Interest calculated on the updated balance each period.
  • Iterative processes with repeated deposits: A rule obtaining a later value from the preceding value.
bội số
Một thừa số thực hiện sự thay đổi phần trăm trong một phép nhân.
phần dư
Giá trị quan sát trừ đi giá trị dự đoán bởi mô hình đã phù hợp.
tỷ lệ bộ phận-trọn vẹn
Sự so sánh giữa một phần với tổng lượng.
tỷ lệ
Tỷ số giữa chiều dài trên bản vẽ và chiều dài thực tế tương ứng.
hằng số tỷ lệ
Hệ số nhân cố định trong quan hệ tỷ lệ đã cho.
mật độ
Khối lượng trên mỗi đơn vị thể tích, với cả hai đơn vị đều được nêu rõ.
hệ số tỷ lệ diện tích
Bình phương của hệ số tỉ lệ chiều dài giữa các hình đồng dạng.
lãi suất kép
Lãi suất được tính trên số dư đã cập nhật trong mỗi kỳ.
mối quan hệ truy hồi
Quy tắc tìm giá trị tiếp theo từ giá trị trước đó.
3.4 · Hình học và đo lường
  • Angle reasoning, similarity and mensuration: The multiplier that relates corresponding lengths in similar shapes.
  • Right triangles and non-right triangles: The side opposite the right angle in a right-angled triangle.
  • Vectors and transformation geometry: The vector sum representing the combined displacement or force.
  • Reflections, rotations and enlargements: The point from which each point's displacement is multiplied by a scale factor.
  • Constructions, loci and geometric conditions: The set of all points satisfying a stated geometric condition.
  • Circle theorems and reasoned proofs: A quadrilateral whose four vertices lie on one circle.
  • Shape vocabulary, properties and symmetry: A mirror line that maps a whole shape onto itself.
  • Angle facts and polygon reasoning: Angles in matching positions at a transversal crossing two lines.
  • Triangle congruence and geometric proof: Equal shape and size, with matching lengths and angles.
  • Circle parts and geometric definitions: A region bounded by a chord and its corresponding arc.
  • Geometric reasoning on coordinate axes: The point halfway between the endpoints of a segment.
  • Solid properties, plans and elevations: An orthographic view from a stated horizontal direction.
  • Measuring angles and three-figure bearings: A direction measured clockwise from north at the starting point.
  • Combined isometries and invariants: A property preserved by a specified transformation.
  • Circle angles and proof chains: An angle formed by two radii meeting at the centre.
  • Tangents, chords and the alternate segment: The tangent–chord angle equals the angle subtended by that chord in the opposite segment.
  • Areas, perimeters and composite plane shapes: The distance between a base and its parallel opposite level, measured at right angles.
  • Prism volume and cylinder measurement: A slice perpendicular to a prism’s length that remains constant along it.
  • Circle lengths, areas and composite boundaries: The total length of a circle’s boundary.
  • Spheres, cones, pyramids and frustums: The remaining solid after a cone or pyramid is cut parallel to its base.
  • Arcs, sectors and reverse angle calculations: A circle region bounded by two radii and their intervening arc.
  • Exact trigonometric values from special triangles: A value retained as a fraction or surd rather than a rounded decimal.
  • Sine rule, cosine rule and triangle area: The angle between the two named sides.
  • Right triangles in three-dimensional shapes: The view or component of a spatial length on a selected plane.
  • Vector geometry and midpoint arguments: Lying on one straight line.
hệ số tỷ lệ
Thừa số liên hệ độ dài tương ứng trong các hình đồng dạng.
cạnh huyền
Cạnh đối diện với góc vuông trong tam giác vuông.
hợp lực
Tổng véc-tơ biểu diễn độ dịch chuyển hoặc lực tổng hợp.
tâm mở rộng
Điểm mà từ đó độ dịch chuyển của mỗi điểm được nhân với hệ số phóng đại.
locus
Tập hợp tất cả các điểm thỏa mãn một điều kiện hình học đã cho.
tứ giác nội tiếp
Tứ giác có bốn đỉnh nằm trên cùng một đường tròn.
trục đối xứng
Trục đối xứng ánh xạ toàn bộ hình dạng lên chính nó.
góc đồng vị
Góc ở vị trí tương ứng khi một đường cắt cắt hai đường thẳng.
tương đồng
Bằng nhau về hình dạng và kích thước, với các cạnh dài và góc bằng nhau.
phân khúc
Vùng được giới hạn bởi một dây cung và cung tròn tương ứng của nó.
trung điểm
Điểm chính giữa giữa hai đầu mút của một đoạn thẳng.
nhìn dọc
Chế độ chiếu vuông góc từ một phương ngang đã cho.
phương vị
Một phương hướng đo theo chiều kim đồng hồ từ phía bắc tại điểm xuất phát.
bất biến
Một tính chất được bảo toàn qua một phép biến đổi xác định.
góc ở tâm
Góc tạo bởi hai bán kính gặp nhau tại tâm.
định lý cung phụ
Góc tiếp tuyến – dây cung bằng góc nội tiếp mà dây cung đó chắn trong cung tròn đối diện.
chiều cao vuông góc
Khoảng cách giữa đáy và mặt phẳng đối diện song song với nó, đo theo phương vuông góc.
mặt cắt ngang
Mặt cắt vuông góc với chiều dài của lăng trụ nhưng không đổi dọc theo chiều dài đó.
chu vi
Tổng độ dài của biên giới hình tròn (chu vi).
nón cụt
Phần khối còn lại sau khi một hình nón hoặc hình chóp bị cắt song song với đáy.
khu vực
Vùng hình tròn được giới hạn bởi hai bán kính và cung tròn nằm giữa chúng.
giá trị chính xác
Giá trị được giữ nguyên dưới dạng phân số hoặc căn thức thay vì làm tròn thành thập phân.
góc xen giữa
Góc giữa hai cạnh đã nêu tên.
phép chiếu
Hình chiếu hoặc thành phần của một độ dài không gian lên một mặt phẳng đã chọn.
thẳng hàng
Nằm trên một đường thẳng.
3.5 · Xác suất
  • Probability, trees and conditional reasoning: The probability of an event after restricting the sample space to a stated condition.
  • Experimental probability, fairness and expected outcomes: The observed count of an outcome divided by the number of trials.
  • Systematic possibilities and equally likely outcomes: The complete set of outcomes in an experiment.
  • Venn diagrams, unions and two-way counts: The outcomes belonging to both named sets.
  • Conditional probability with tables and expected frequencies: A probability within the group selected by given information.
xác suất có điều kiện
Xác suất nằm trong nhóm được chọn bởi thông tin đã cho.
tần suất tương đối
Số lần xuất hiện của một kết quả chia cho số lần thử.
không gian mẫu
Tập hợp đầy đủ các kết quả trong một phép thử.
giao điểm
Các kết quả thuộc về cả hai tập hợp được nêu tên.
3.6 · Thống kê
  • Data summaries, histograms and interpretation: Frequency divided by class width, used as histogram height.
  • Cumulative frequency and box plots: The difference between the upper and lower quartiles.
  • Samples, populations and justified comparisons: The complete group about which a statistical claim is made.
  • Choosing displays, pie charts and time series: Measurements recorded in time order.
  • Frequency summaries and grouped estimates: The class interval containing the greatest frequency.
  • Scatter graphs, correlation and cautious predictions: A pattern of association between two measured variables.
  • Histogram density and cumulative-frequency construction: Frequency divided by class width, used as histogram height.
  • Quartiles, box plots and distribution comparisons: The upper quartile minus the lower quartile.
mật độ tần số
Tần số chia độ rộng lớp, dùng làm chiều cao biểu đồ tần số.
khoảng tứ phân vị
Tứ phân vị trên trừ tứ phân vị dưới.
dân số
Tập hợp đầy đủ mà một tuyên bố thống kê được đưa ra.
dãy thời gian
Các phép đo được ghi lại theo thứ tự thời gian.
lớp mốt
Khoảng lớp chứa tần suất lớn nhất.
tương quan
Một mô hình liên kết giữa hai biến được đo.

Chuẩn bị cho kỳ thi này

  • Choose one tier for all three papers. Foundation targets grades 1–5; Higher targets grades 4–9, with a possible grade 3 award.
  • The full formula sheet is supplied for 2026 and 2027; use the correct tier and year. The September 2026 notice also confirms continued provision from 2028 for this specification.

Vẫn cần bổ sung nội dung giảng dạy

  • Official question-bank boundaries, scheme alignment and all objective-level teaching coverage require the recorded review; no practice registry promotion.
  • The authored diagnostic assessments are not full-length qualification mocks.

Quy chuẩn và tài liệu mẫu

Tài liệu khóa học

Chuẩn bị khóa học

Tài liệu có sẵn. Ghi chú theo từng hội đồng, bài đánh giá và luyện tập đề thi quá khứ tương tác chưa khả dụng cho tất cả các môn học.

Bài học →

Đăng nhập hoặc tạo tài khoản

IGCSE, A-Level & AP