Bỏ qua nội dung

AQA · A-Level

Toán học

Giấy thi, mẫu đề và tài liệu chương trình cho khóa học này.

← Các kỳ thi

Mã chứng chỉ: 7357

Giấy thi quá khứ gần đây

25 cặp giấy thi và phương án chấm điểm

Duyệt giấy thi và phương án chấm điểm →

Tài liệu in, bài tập và slide

Các tài liệu chủ đề chia sẻ giữ nguyên tên khóa học và chủ đề nguồn gốc. Sử dụng quy chuẩn của hội đồng bạn đã chọn để xác định phạm vi, cấp độ và yêu cầu kỳ thi.

Tài liệu hướng dẫn (19)
Slide thuyết trình (19)
Tài liệu hướng dẫn · Toán học A-Level (6)
Phiếu bài tập · Toán học A-Level (38)
Slide thuyết trình · Toán học A-Level (6)
Slide hướng dẫn làm bài tập · Toán học A-Level (76)

Đơn vị học phần và mục tiêu học tập

Các bài học này dạy các mục tiêu chương trình đã chọn. Hãy kiểm tra các lỗ hổng bao phủ còn sót lại; tài liệu này không phải là chương trình chuẩn bị hoàn chỉnh.

A · Chứng minh
  • Deduction, contradiction and induction: A single valid case that disproves a universal claim.
  • Complete cases and counterexamples: A proof that checks every possibility in a finite, complete set of cases.
  • Irrational roots and infinitely many primes: A proof that assumes the negation of a claim and derives an impossibility.
trường hợp phản chứng
Một trường hợp hợp lệ duy nhất bác bỏ một khẳng định phổ quát.
chứng minh bằng cách liệt kê hết các trường hợp
Một chứng minh kiểm tra mọi trường hợp trong một tập hợp các tình huống hữu hạn, đầy đủ.
chứng minh bằng phản chứng
Một chứng minh giả sử phủ định của một mệnh đề và rút ra điều mâu thuẫn.
B · Đại số và hàm số
  • Indices, surds and standard form: The power to which a base is raised.
  • Quadratics and inequalities: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.
  • Domains, inverses and composition: The set of allowed inputs to a function.
  • Polynomial division, remainders and factors: The statement that x−a is a factor of polynomial P(x) exactly when P(a)=0.
  • Algebraic fractions and excluded values: An input for which an original denominator or divisor is zero.
  • Partial fractions with distinct linear factors: A simpler fraction in a sum that equals a rational expression on its original domain.
  • Repeated linear factors in partial fractions: A denominator factor occurring more than once, requiring a term for each power.
  • Linear and quadratic simultaneous equations: An ordered pair that satisfies every equation in a system at the same time.
  • Rational indices and real domains: An exponent written as a fraction of integers.
  • Surds and conjugate denominators: A paired expression with the sign between two terms reversed.
  • Completing the square and quadratic structure: A quadratic written as a multiple of a squared bracket plus a constant.
  • Equations quadratic in another expression: Replacing a repeated expression with a new variable to reveal a simpler equation.
  • Inequalities, fractions and solution sets: The values common to two solution sets, corresponding to AND.
  • Regions between linear and quadratic boundaries: The line or curve separating points that satisfy an inequality from those that do not.
  • Modulus graphs and piecewise solutions: The nonnegative distance of a real number from zero.
  • Reciprocal graphs and asymptotes: A line that a curve approaches in a limiting direction.
  • Inverse graphs and restricted branches: A function for which different inputs always give different outputs.
  • Composite functions and intermediate domains: Applying one function to the output of another, in a specified order.
  • Combined graph transformations and order: The factor multiplying the original horizontal coordinates when a graph is stretched or compressed.
  • Fitting and refining a function model: An observed output minus the output predicted by a model.
  • Polynomial sketches, repeated roots and signs: The number of times a root’s linear factor appears in a polynomial.
index
Số mũ mà cơ số được nâng lên.
delta (discriminant)
Đại lượng b²-4ac xác định nghiệm thực của ax²+bx+c=0.
miền xác định
Tập hợp các giá trị đầu vào được phép của một hàm số.
định lý nhân tử
Phát biểu cho biết x−a là nhân tử của đa thức P(x) khi và chỉ khi P(a)=0.
giá trị bị loại bỏ
Một giá trị đầu vào khiến mẫu số hoặc số chia ban đầu bằng không.
phân tích thành phân thức đơn giản
Phân số tối giản trong một tổng bằng biểu thức hữu tỉ trên miền xác định ban đầu.
nhân tử lặp lại
Nhân tử mẫu số xuất hiện nhiều hơn một lần, yêu cầu có một số hạng tương ứng với mỗi lũy thừa.
hệ phương trình đồng thời
Cặp có thứ tự thỏa mãn đồng thời mọi phương trình trong hệ.
lũy thừa hữu tỷ
Lũy thừa được viết dưới dạng phân số của các số nguyên.
liên hợp
Biểu thức đối với dấu giữa hai số hạng bị đảo ngược.
hoàn thành bình phương
Đa thức bậc hai được viết dưới dạng tích của một bình phương và cộng thêm hằng số.
thay thế
Thay thế một biểu thức lặp lại bằng biến mới để làm lộ ra phương trình đơn giản hơn.
giao điểm
Các giá trị chung của hai tập nghiệm, tương ứng với AND.
biên giới
Đường thẳng hoặc đường cong phân chia các điểm thỏa mãn bất đẳng thức khỏi các điểm không thỏa mãn.
mô-đun
Khoảng cách không âm của một số thực từ zero.
tiếp tuyến
Đường thẳng mà một đường cong tiến tới theo hướng giới hạn.
một-một
Hàm mà các đầu vào khác nhau luôn cho kết quả khác nhau.
bố cục
Áp dụng một hàm lên kết quả của hàm khác, theo thứ tự đã quy định.
hệ số co dãn theo phương ngang
Nhân tử nhân với tọa độ ngang ban đầu khi đồ thị bị kéo dãn hoặc nén.
phần dư
Giá trị quan sát trừ đi giá trị dự đoán bởi mô hình.
bội số
Số lần nhân tử tuyến tính của một nghiệm xuất hiện trong đa thức.
C · Hình học tọa độ
  • Coordinate geometry and tangents: The change in y divided by the corresponding change in x.
  • Parametric curves, domains and direction: A variable that determines both coordinates of a point.
  • Parametric modelling in motion and design: A model expressing two quantities using a common variable and stated assumptions.
  • General-form lines and contextual models: The form ax+by+c=0 for a straight line, with a and b not both zero.
  • Shifted circles, chords and tangents: The point at equal distance from every point on a circle.
hệ số góc
Độ biến thiên của y chia cho độ biến thiên tương ứng của x.
parameter
Biến xác định cả hai tọa độ của một điểm.
mô hình tham số
Mô hình biểu diễn hai đại lượng thông qua một biến chung và các giả thiết đã nêu.
dạng tổng quát
Dạng ax+by+c=0 cho đường thẳng, với a và b không đồng thời bằng 0.
tâm
Điểm cách đều mọi điểm trên một đường tròn.
D · Dãy số và tổng dãy
  • Sequences, series and recurrence: The constant multiplier between consecutive terms of a geometric sequence.
  • Binomial expansion and valid approximations: The number of ways to choose a specified number of objects from a set.
  • Factorials, combinations and binomial coefficients: A selection in which order does not distinguish different choices.
  • Increasing, decreasing and periodic recurrences: A sequence whose terms repeat after a fixed positive number of steps.
  • Sigma notation, indices and changed limits: The variable that takes each integer value between a sum’s stated limits.
  • Arithmetic series and inverse problems: The fixed amount added to each term to obtain the next.
  • Geometric sums, alternating ratios and convergence: The fixed factor multiplying each term to obtain the next.
  • Repeated-deposit sequence models and timing: An amount added to an account at a stated time.
công bội
Hệ số cố định nhân với mỗi số hạng để thu được số hạng kế tiếp.
hệ số nhị thức
Số cách chọn một số lượng vật thể xác định từ một tập hợp.
sự kết hợp
Một cách chọn trong đó thứ tự không phân biệt các lựa chọn khác nhau.
dãy định kỳ
Dãy có các số hạng lặp lại sau một số bước cố định dương.
chỉ số tổng
Biến nhận mỗi giá trị nguyên nằm giữa các giới hạn được nêu của tổng.
công sai
Số lượng cố định thêm vào mỗi số hạng để thu được số hạng kế tiếp.
tiền gửi
Một khoản tiền được thêm vào tài khoản tại một thời điểm cụ thể.
E · Hàm lượng giác
  • Right triangles and non-right triangles: The side opposite the right angle in a right-angled triangle.
  • Radians, identities and trigonometric equations: The angle subtended by an arc whose length equals the radius.
  • Radian measure, arcs, sectors and segments: The region bounded by two radii and their circular arc.
  • Small-angle approximations and their limits: A nearby simpler value used with a stated accuracy limit.
  • All-angle definitions, exact values and periodic graphs: The circle of radius one centred at the coordinate origin.
  • Reciprocal trigonometric functions and excluded angles: The reciprocal of cosine wherever cosine is nonzero.
  • Inverse trigonometric branches and principal values: The single inverse output chosen from a stated restricted interval.
  • Reciprocal identities and one-sided proof chains: An equality true for every input in its stated common domain.
  • Compound-angle formulae and geometric proofs: An angle expressed as the sum or difference of two angles.
  • Double-angle identities, quadrant signs and squared forms: An angle equal to twice the original angle.
  • Auxiliary-angle forms, ranges and interval solutions: The nonnegative size of an oscillation about its centre line.
  • Quadratic trigonometric equations and complete root sets: A possible solution that still needs checking in the original equation and interval.
  • Multiple-angle equations and transformed intervals: The interval for a substituted angle after applying the same input change to its endpoints.
  • Trigonometric components and motion models: The signed projection of a vector along a chosen coordinate direction.
  • Sine rule, cosine rule and triangle area: The angle between the two named sides.
  • The ambiguous sine-rule case and valid triangle counts: Given triangle data that can produce two different valid triangles.
  • Key-point sketches and transformed tangent domains: A line approached by a graph while its values grow without bound or tend toward a limit.
cạnh huyền
Cạnh đối diện với góc vuông trong tam giác vuông.
radian
Góc chắn bởi cung có độ dài bằng bán kính.
khu vực
Vùng giới hạn bởi hai bán kính và cung tròn tương ứng.
xấp xỉ
Một giá trị gần hơn đơn giản hơn được sử dụng kèm theo giới hạn độ chính xác đã nêu.
đường tròn đơn vị
Đường tròn bán kính một đơn vị có tâm tại gốc tọa độ.
cát tuyến
Giá trị nghịch đảo của cosin tại mọi nơi cosin khác không.
giá trị chính
Một giá trị nghịch đơn được chọn từ một khoảng xác định giới hạn.
bản sắc
Một đẳng thức đúng với mọi đầu vào trong tập xác định chung đã cho.
góc hợp
Một góc được biểu diễn dưới dạng tổng hoặc hiệu của hai góc.
góc đôi
Một góc bằng gấp đôi góc ban đầu.
biên
Kích thước không âm của dao động quanh đường trung tâm.
thí sinh
Một nghiệm khả dĩ vẫn cần kiểm tra lại trong phương trình ban đầu và khoảng xác định.
khoảng biến đổi
Khoảng giá trị của góc thay thế sau khi áp dụng cùng sự biến đổi vào hai đầu mút.
thành phần
Hình chiếu có dấu của một vectơ dọc theo một hướng tọa độ đã chọn.
góc xen giữa
Góc giữa hai cạnh đã nêu tên.
trường hợp không xác định
Dữ liệu tam giác cho phép tạo ra hai tam giác hợp lệ khác nhau.
tiếp tuyến
Đường tiệm cận mà đồ thị tiến tới khi các giá trị tăng vô hạn hoặc tiến tới một giới hạn.
F · Hàm mũ và logarit
  • Exponentials, logarithms and modelling: The time for a decaying quantity to fall to half its initial value.
  • Exponential graphs and logarithmic inverses: The exponent to which a stated valid base must be raised to produce a positive input.
  • Logarithm laws, negative powers and equation domains: The input inside a logarithm, which must be positive for a real logarithm.
  • Logarithmic graphs for power and exponential fits: The transformed vertical value when the chosen horizontal variable is zero.
  • Proportional rates, half-life and model limits: A rate of change equal to a constant multiplied by the current amount.
thời gian bán rã
Thời gian để một đại lượng giảm xuống còn một nửa giá trị ban đầu.
logarit
Số mũ mà cơ số hợp lệ phải được nâng lên để tạo ra một giá trị đầu vào dương.
tham số thực (argument)
Giá trị đầu vào bên trong logarit, vốn phải là số dương đối với logarit thực.
giao điểm
Giá trị tung đã biến đổi khi biến hoành độ đã chọn bằng không.
tỷ lệ thuận
Tốc độ biến thiên bằng hằng số nhân với lượng hiện tại.
G · Vi phân
  • Derivatives and stationary points: The instantaneous rate of change, also the gradient of a tangent.
  • Chain, product, quotient and implicit differentiation: The rule that multiplies the outer derivative by the inner derivative for a composite function.
  • Secants, limits and first-principles power derivatives: The change in function output divided by a nonzero change in input.
  • First-principles sine and cosine derivatives: A small-angle limit used with angles measured in radians.
  • Gradient graphs, concavity and inflection tests: A point where a continuous curve changes its direction of concavity.
  • Rational-power derivatives and valid domains: An exponent that can be written as a fraction of integers, interpreted with a valid real root.
  • Exponential, logarithmic and trigonometric derivatives: The derivative of the changing input inside a composite function.
  • Product and quotient rules with retained exclusions: The rule for differentiating a ratio of two changing functions when the denominator is nonzero.
  • Chain rules for nested functions and restricted inputs: The outer derivative evaluated at the inner output, multiplied by the derivative of that inner input.
  • Inverse derivatives at corresponding points: The rate of the inverse output with respect to its input, evaluated at the corresponding original point.
  • Connected rates, geometry and time units: Rates linked by a relationship between quantities changing with the same time variable.
  • Implicit first derivatives and tangent domains: An equation relating x and y without isolating one as an explicit function of the other.
  • Parametric first derivatives and vertical tangents: The ratio of the y-rate to the x-rate along a parametrised curve, when the x-rate is nonzero.
  • Tangent and normal equations and gradient conditions: A line through the curve point perpendicular to its local tangent.
  • Optimisation with constraints, boundaries and rejected roots: The allowed input values after the original physical or mathematical constraints are applied.
  • Constructing differential equations from rate laws: A relationship involving an unknown function and one or more of its derivatives.
đạo hàm
Tốc độ biến thiên tức thời, cũng là hệ số góc của tiếp tuyến.
quy tắc chuỗi
Quy tắc nhân đạo hàm ngoài với đạo hàm trong đối với hàm hợp.
biểu thức sai số
Sự thay đổi trong giá trị hàm chia cho sự thay đổi của biến số đầu vào (khác không).
giới hạn radian
Giới hạn góc nhỏ sử dụng với các góc đo bằng radian.
điểm uốn
Một điểm mà tại đó đường cong liên tục thay đổi hướng lồi lõm của nó.
lũy thừa hữu tỉ
Số mũ có thể viết dưới dạng phân số của các số nguyên, được diễn giải bằng căn thực hợp lệ.
tốc độ bên trong
Đạo hàm của đầu vào thay đổi nằm bên trong hàm hợp.
quy tắc thương
Quy tắc đạo hàm của thương hai hàm biến số khi mẫu số khác không.
đạo hàm hợp
Đạo hàm ngoài được đánh giá tại kết quả đầu vào trong, nhân với đạo hàm của đầu vào trong đó.
đạo hàm ngược
Tốc độ thay đổi của đầu ra nghịch đảo theo đầu vào của nó, được đánh giá tại điểm gốc tương ứng.
tốc độ liên kết
Các tốc độ liên kết thông qua mối quan hệ giữa các đại lượng thay đổi theo cùng biến số thời gian.
biểu thức ẩn
Một phương trình liên hệ x và y mà không tách riêng một biến thành hàm rõ ràng của biến kia.
độ dốc tham số
Tỷ lệ giữa tốc độ thay đổi của y so với tốc độ thay đổi của x dọc theo một đường cong có tham số, khi tốc độ thay đổi của x khác không.
đường pháp tuyến
Đường thẳng đi qua điểm trên đường cong và vuông góc với tiếp tuyến cục bộ tại điểm đó.
miền khả thi
Các giá trị đầu vào được phép sau khi đã áp dụng các ràng buộc vật lý hoặc toán học ban đầu.
phương trình vi phân
Một mối liên hệ bao gồm một hàm ẩn và một hoặc nhiều đạo hàm của nó.
H · Tích phân
  • Integrals, area and accumulation: A function whose derivative equals the given integrand.
  • Substitution, parts and partial fractions: An integration method based on the derivative of a product.
  • Differential equations and numerical solutions: A specified value that selects a particular solution from a family.
  • The Fundamental Theorem and accumulated change: A function whose value is the signed integral from a fixed starting point to a variable endpoint.
  • Integration as the limit of rectangle sums: A sum of signed rectangle contributions that approaches an integral as the partition becomes finer.
  • Elementary antiderivatives, coefficients and domains: A function whose derivative is the specified integrand on the stated interval.
nguyên hàm
Một hàm có đạo hàm là biểu thức dưới dấu tích phân đã cho trên khoảng xác định.
tích phân từng phần
Một phương pháp tích phân dựa trên đạo hàm của một tích.
điều kiện ban đầu
Một giá trị đã cho chọn ra một nghiệm cụ thể từ họ nghiệm.
hàm tích lũy
Một hàm có giá trị bằng tích phân có dấu từ một điểm bắt đầu cố định đến một điểm kết thúc biến thiên.
tổng Riemann
Tổng các đóng góp có dấu của các hình chữ nhật tiến gần đến một tích phân khi khoảng chia trở nên mịn hơn.
I · Phương pháp số
  • Root finding and numerical integration: A repeated update in which each new approximation is calculated from the previous one.
lặp lại
Một phép cập nhật lặp đi lặp lại trong đó mỗi xấp xỉ mới được tính toán từ xấp xỉ trước đó.
J · Vectơ
  • Vectors and transformation geometry: The vector sum representing the combined displacement or force.
  • Reflections, rotations and enlargements: The point from which each point's displacement is multiplied by a scale factor.
hợp lực
Tổng véc-tơ biểu diễn độ dịch chuyển hoặc lực tổng hợp.
tâm mở rộng
Điểm mà từ đó độ dịch chuyển của mỗi điểm được nhân với hệ số phóng đại.
K · Lấy mẫu thống kê
  • Sampling and a large data set: The list or population definition from which a sample is selected.
khung mẫu
Danh sách hoặc định nghĩa tổng thể mà từ đó một mẫu được chọn.
L · Trình bày và diễn giải số liệu
  • Data summaries, histograms and interpretation: Frequency divided by class width, used as histogram height.
  • Regression, financial models and residuals: The observed value minus the value predicted by a fitted model.
mật độ tần số
Tần số chia độ rộng lớp, dùng làm chiều cao biểu đồ tần số.
phần dư
Giá trị quan sát trừ đi giá trị dự đoán bởi mô hình đã phù hợp.
M · Xác suất
  • Probability, trees and conditional reasoning: The probability of an event after restricting the sample space to a stated condition.
xác suất có điều kiện
Xác suất của một biến cố sau khi thu hẹp không gian mẫu theo một điều kiện đã cho.
N · Phân phối thống kê
  • Binomial, normal and Poisson models: The probability-weighted mean of a random variable.
giá trị kỳ vọng
The probability-weighted mean of a random variable.
O · Kiểm định giả thuyết thống kê
  • Hypothesis testing and contextual conclusions: The chosen probability threshold for rejecting a null hypothesis.
mức ý nghĩa
Ngưỡng xác suất đã chọn để bác bỏ giả thuyết không.
P · Các đại lượng và đơn vị trong cơ học
  • Accuracy, bounds and compound measures: The smallest possible value consistent with a stated rounding rule.
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
giới hạn dưới
Giá trị nhỏ nhất phù hợp với quy tắc làm tròn đã nêu.
lực hợp
Tổng vectơ của tất cả các lực tác động lên vật thể mô hình.
Q · Chuyển động học
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
  • Integrals, area and accumulation: A function whose derivative equals the given integrand.
lực hợp
Tổng vectơ của tất cả các lực tác động lên vật thể mô hình.
nguyên hàm
Một hàm mà đạo hàm của nó bằng nguyên hàm (hàm dưới dấu tích phân) đã cho.
R · Lực và các định luật Newton
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
lực hợp
Tổng vectơ của tất cả các lực tác động lên vật thể mô hình.
S · Mô-men lực
  • Moments, equilibrium and centres of mass: Force multiplied by the perpendicular distance from its line of action to a pivot.
thời điểm
Lực nhân với khoảng cách vuông góc từ đường tác dụng của lực đến điểm tựa.

Chuẩn bị cho kỳ thi này

  • Paper 1 covers A–I. Paper 2 adds J and P–S to Paper 1 content. Paper 3 adds K–O to Paper 1 content.
  • All students study pure, mechanics and statistics. Use the AQA large data set and the 7357 formula booklet.
  • Calculators need statistical distribution functions; symbolic algebra/differentiation/integration facilities are prohibited under the examination rules.

Vẫn cần bổ sung nội dung giảng dạy

  • Official question-bank boundaries, scheme alignment and all objective-level teaching coverage require the recorded review; no practice registry promotion.
  • The authored diagnostic assessments are not full-length qualification mocks.

Quy chuẩn và tài liệu mẫu

Tài liệu khóa học

Chuẩn bị khóa học

Tài liệu có sẵn. Ghi chú theo từng hội đồng, bài đánh giá và luyện tập đề thi quá khứ tương tác chưa khả dụng cho tất cả các môn học.

Bài học →

Đăng nhập hoặc tạo tài khoản

IGCSE, A-Level & AP