Moments, equilibrium and centres of mass
Introduzido| English | Significado |
|---|---|
| centres of mass | The points at which the whole weight of bodies can be taken to act (singular: centre of mass). |
| moment/ˈməʊmənt/ | momento |
| equilibrium/ˌiːkwɪˈlɪbrɪəm/ | A state with no resultant force or resultant moment. |
Archimedes' lost method, found in 1906
- In 1906, the Danish scholar Johan Heiberg examined a prayer book in Constantinople and found, under the prayers, a scraped-off text by Archimedes: The Method. It shows how Archimedes found the centres of mass of a hemisphere and other solids by slicing them into thin layers and balancing them — integration 2,000 years early.
- M3 finds centres of mass 质心 by integration, and uses them with moments to decide when rigid bodies stay in equilibrium 平衡.
Laminae by integration
- For a uniform lamina under $y = f(x)$ from $a$ to $b$: $\bar{x} = \dfrac{\int xy\,dx}{\int y\,dx}$ and $\bar{y} = \dfrac{\int \frac{1}{2}y^2\,dx}{\int y\,dx}$.
- Under $y = x^2$ from 0 to 2: area $\tfrac{8}{3}$, $\bar{x} = \dfrac{4}{8/3} = 1.5$ and $\bar{y} = \dfrac{16/5}{8/3} = 1.2$.
Buscar $\bar{x}$ for the uniform lamina under $y = x$ from $x = 0$ até $x = 3$.
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\dfrac{\int x^2\,dx}{\int x\,dx} = \dfrac{9}{4.5} = 2$ — a triangle, $\tfrac{2}{3}$ of the way from the vertex.
Solids of revolution
- Rotating $y = f(x)$ about the $x$-axis gives a solid with $\bar{x} = \dfrac{\int \pi y^2x\,dx}{\int \pi y^2\,dx}$ (and $\bar{y} = 0$ by symmetry).
- Standard results: a solid hemisphere of radius $r$ has $G$ at $\tfrac{3}{8}r$ from its flat face; a solid cone of height $h$ at $\tfrac{1}{4}h$ from its base.
A solid hemisphere has radius 8 cm. How far is its centre of mass from the flat face?
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\tfrac{3}{8} \times 8 = 3$.
A uniform solid cone is 12 cm tall. Where is its centre of mass?
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
$\tfrac{1}{4} \times 12 = 3$. 4 cm is the triangle result.
Worked example: the centre of mass of a cone
Show that a uniform solid cone of height $h$ and base radius $r$ has its centre of mass $\tfrac{1}{4}h$ above the base.
- Set up: put the vertex at $O$ and the axis along $Ox$; the slant edge is $y = \dfrac{r}{h}x$ for $0 \le x \le h$.
- Integrate: $\displaystyle\int_0^h \pi\frac{r^2}{h^2}x^3\,dx = \frac{\pi r^2h^2}{4}$ and $\displaystyle\int_0^h \pi\frac{r^2}{h^2}x^2\,dx = \frac{\pi r^2h}{3}$, so $\bar{x} = \dfrac{h^2/4}{h/3} = \dfrac{3h}{4}$ from the vertex.
- Answer: $h - \tfrac{3h}{4} = \tfrac{1}{4}h$ above the base. ∎
The region under $y = \sqrt{x}$ from 0 to 4 is rotated about the $x$-axis. Find $\bar{x}$ of the solid, to 3 s.f.
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\dfrac{\int x^2\,dx}{\int x\,dx} = \dfrac{64/3}{8} = \tfrac{8}{3}$.
Rigid bodies in equilibrium
- For equilibrium, resolve in two directions and take moments about a point — choose a point where unknown forces act, so they vanish from the equation.
- A body hanging freely has its centre of mass vertically below the support; a body on a plane topples when the vertical through $G$ leaves its base.
Moments, equilibrium and centres of mass
For equilibrium, both the resultant force and resultant moment are zero
Distinguish the force from its moment about a chosen pivot.
Taking moments about the point where two unknown forces act removes both from the equation.
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
Their lines of action pass through that point, so their moments are zero.
A ladder about to slip
- A uniform 5 m ladder of weight 200 N rests at $60°$ to rough ground against a smooth wall. Moments about the foot: $S \times 5\sin 60° = 200 \times 2.5\cos 60°$, so the wall pushes with $S = 57.7$ N.
- Resolving: friction $F = S = 57.7$ N and $R = 200$ N. If it is about to slip, $\mu = \dfrac{57.7}{200} = 0.289$.
A uniform ladder rests against a smooth wall at angle $\theta$ to rough ground and is about to slip. If $\tan\theta = 2$, find $\mu$.
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\mu = \dfrac{1}{2\tan\theta} = \tfrac{1}{4}$, from moments and resolving.
Using $\int y\,dx$ for a solid. A solid's centre of mass weights each slice by its volume $\pi y^2\,dx$, not by its height $y$. Using the lamina formula for the cone gives $\tfrac{2}{3}h$ from the vertex — the answer for a triangle, not a cone.
For a lamina, $\bar{x} = \tfrac{\int xy\,dx}{\int y\,dx}$ and $\bar{y} = \tfrac{\int \frac{1}{2}y^2\,dx}{\int y\,dx}$; for a solid of revolution, $\bar{x} = \tfrac{\int y^2x\,dx}{\int y^2\,dx}$. A hemisphere has $G$ at $\tfrac{3}{8}r$ from its flat face and a cone at $\tfrac{1}{4}h$ from its base. For equilibrium, resolve twice and take moments where unknowns meet.
A toy is a solid hemisphere of radius $r$ joined at its flat face to a solid cone of the same radius and height $h$, both of the same material. Show that the toy can rest on any point of its curved surface if $h = \sqrt{3}r$.
Composite body, zero moment.