Required practical 7: identify both ions in an actual unknown salt
Introduzido| English | Significado |
|---|---|
| unknown salt/ʌnˈnəʊn sɒlt/ | sal desconhecido |
| barium chloride | The salt BaCl₂, used with dilute hydrochloric acid to test for sulfate ions. |
Two halves of a name
- An unknown salt 未知盐 has two ions: a positive metal ion and a negative ion. Its name needs both — "potassium" and "sulfate".
- In Required Practical 7 you run a set of tests, one half at a time, and then write the formula.
Positive ion: flame test and hydroxides
- Flame test: lilac → K⁺, yellow → Na⁺, crimson → Li⁺, orange-red → Ca²⁺, green → Cu²⁺.
- Sodium hydroxide: coloured precipitates for Cu²⁺, Fe²⁺, Fe³⁺; white for Al³⁺, Ca²⁺, Mg²⁺.
Start with the metal ion
A lilac flame points to K⁺. Together with a white precipitate from acidified barium chloride (sulfate) and no carbonate or halide result, the salt is K₂SO₄: two +1 ions balance one −2 ion.
Negative ion: three tests
- Carbonate: dilute acid → fizzing; gas turns limewater milky.
- Halide: nitric acid + silver nitrate → white (Cl⁻), cream (Br⁻), yellow (I⁻).
- Sulfate: hydrochloric acid + barium chloride 氯化钡 → white precipitate.
Which reagents test for sulfate ions?
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
White precipitate of barium sulfate.
Match each test result to the ion.
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
Three negative-ion tests.
Worked example: solving the salt
An unknown white salt gives a lilac flame. With acid there is no fizzing; with silver nitrate there is no precipitate; with barium chloride a white precipitate forms.
- Positive ion: lilac → K⁺.
- Negative ion: only the sulfate test is positive → SO₄²⁻.
- Formula: two K⁺ (+2) balance one SO₄²⁻ (−2): K₂SO₄, potassium sulfate.
A salt gives a yellow flame and a cream precipitate with acidified silver nitrate. What is it?
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
Yellow → Na⁺; cream → Br⁻.
A salt contains Ca²⁺ and Cl⁻. What is its formula?
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
Two Cl⁻ balance Ca²⁺.
Order and fair tests
- Use a fresh sample for each test, so one reagent does not interfere with the next.
- Acidify before the halide and sulfate tests to remove carbonate ions, which would also give a precipitate.
Why is a fresh sample used for each test?
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
Avoid interference.
Don't use sulfuric acid in the sulfate test or hydrochloric acid in the chloride test. You would be adding the very ion you are testing for, and every sample would give a positive result.
Sulfuric acid is a good choice for acidifying a sulfate test.
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
It adds sulfate ions.
In RP7, identify the positive ion with flame tests and sodium hydroxide, and the negative ion with the carbonate, halide and sulfate tests. Use fresh samples, acidify correctly, then combine the ions with balanced charges to write the formula.
An unknown salt gives a green flame, a blue precipitate with sodium hydroxide and a white precipitate with acidified barium chloride. Identify the salt and explain.
Both halves.