Mean rates: use the change over the chosen interval
Introduzido| English | Significado |
|---|---|
| mean reaction rate/miːn rɪˈækʃn reɪt/ | taxa média de reação |
| tangent/ˈtændʒənt/ | tangente |
Fast and slow
- An explosion is over in a fraction of a second; rusting takes years. Both are chemical reactions — they differ in rate.
- The mean reaction rate 平均反应速率 tells you how much reactant is used, or product made, per second over a chosen time.
The formula
- Mean rate $= \dfrac{\text{quantity of product formed}}{\text{time taken}}$ or $\dfrac{\text{quantity of reactant used}}{\text{time taken}}$.
- Units: $\dfrac{\text{cm}^3}{\text{s}}$ for gas volume, $\dfrac{\text{g}}{\text{s}}$ for mass.
45 cm³ of gas is made in 90 s. What is the mean rate?
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\dfrac{45}{90} = 0.50$.
A flask loses 1.2 g in 4 minutes. What is the mean rate in g/s?
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
4 min = 240 s; $\dfrac{1.2}{240} = 0.0050$.
Match each measurement to its rate unit.
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
Quantity per time.
Reading it from a graph
- On a graph of gas volume against time, choose two times, A and B.
- Mean rate between them $= \dfrac{\text{change in volume}}{\text{change in time}}$ — the gradient of the straight line joining A and B.
Worked example: gas from marble chips
Between 20 s and 60 s, the gas volume rises from 30 cm³ to 54 cm³.
- Change in volume $= 54 - 30 = 24$ cm³.
- Change in time $= 60 - 20 = 40$ s.
- Mean rate $= \dfrac{24}{40} = 0.60 \, \dfrac{\text{cm}^3}{\text{s}}$.
Mean rate over a chosen interval
Move A and B: the secant gradient is the mean rate, change in gas volume ÷ change in time, the same method as 24 cm³ in 40 s = 0.60 cm³/s. A different interval gives a different mean.
The gas volume is 12 cm³ at 10 s and 40 cm³ at 50 s. What is the mean rate between these times?
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\dfrac{28}{40} = 0.70$.
The rate changes
- Reactions are fastest at the start, when there are most reactant particles, and slow down as they are used up.
- So a mean rate over the first 20 s is bigger than one over the last 20 s.
- The rate at a single instant is the gradient of the tangent 切线 to the curve at that time (Higher Tier).
When is a reaction usually fastest?
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
Most reactant particles are present.
The final volume is not the rate. Two reactions can make the same 60 cm³ of gas, but one in 30 s and the other in 5 minutes. Rate is about how fast, not how much.
The reaction that makes the most gas is always the fastest.
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
Rate is about time.
Mean rate = change in quantity ÷ change in time, the gradient of the line between two points on the graph. Reactions slow down as reactants are used up, so the mean depends on the interval chosen.
A gas-volume graph shows 20 cm³ at 10 s, 35 cm³ at 30 s and 40 cm³ at 50 s. Calculate the mean rates for 10–30 s and 30–50 s and explain the difference.
Reactions slow down.