Higher Tier: calculate tangent gradients and molar rates
Introduzido| English | Significado |
|---|---|
| instantaneous rate/ˌɪnstənˈteɪnɪəs reɪt/ | taxa instantânea |
| molar rate/ˈməʊlə reɪt/ | taxa molar |
Speed right now
- A car's average speed for a journey and its speedometer reading at one moment are different numbers.
- Reactions are the same: the mean rate over an interval and the instantaneous rate 瞬时速率 at one moment.
- This lesson is Higher Tier.
Drawing a tangent
- At the chosen time, draw a straight line that just touches the curve and has the same slope there — a tangent.
- Make it long, so its gradient can be measured accurately.
Measuring the gradient
- Pick two points far apart on the tangent line (not on the curve).
- Gradient $= \dfrac{\text{rise}}{\text{run}} = \dfrac{\Delta \text{volume}}{\Delta \text{time}}$.
Worked example: rate at 30 s
A tangent at 30 s passes through (10 s, 16 cm³) and (50 s, 48 cm³).
- Rise $= 48 - 16 = 32$ cm³. Run $= 50 - 10 = 40$ s.
- Rate at 30 s $= \dfrac{32}{40} = 0.80 \, \dfrac{\text{cm}^3}{\text{s}}$.
- A tangent at 50 s would be less steep: the rate falls as reactants are used up.
A tangent gives the rate at one instant
Slide the tangent point along the curve. Its gradient is the instantaneous rate, which falls as reactants are used up, while the secant still gives only a mean.
A tangent passes through (0 s, 5 cm³) and (40 s, 45 cm³). What is its gradient?
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\dfrac{40}{40} = 1.0$.
A tangent passes through (20 s, 30 cm³) and (80 s, 48 cm³). What is the rate?
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\dfrac{18}{60} = 0.30$.
How does the tangent at 60 s compare with the tangent at 10 s for a normal reaction?
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
Reactants are used up.
Rates in mol/s
- A molar rate 摩尔速率 uses moles instead of volume or mass.
- Convert with $\dfrac{\text{volume (cm}^3)}{24\,000}$ for a gas at RTP, or $\dfrac{\text{mass}}{M_r}$.
- Example: 0.80 cm³/s of gas $= \dfrac{0.80}{24\,000} = 3.3 \times 10^{-5} \, \dfrac{\text{mol}}{\text{s}}$.
A gas forms at 1.2 cm³/s at RTP. What is this in units of 10⁻⁵ mol/s?
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\dfrac{1.2}{24\,000} = 5.0 \times 10^{-5}$.
CO₂ ($M_r$ 44) is lost at 0.022 g/s. What is the rate in mol/s?
Dificuldade 2/5 · Moedas 140 + pequeno bônus na primeira conclusão hoje
$\dfrac{0.022}{44} = 5.0 \times 10^{-4}$.
Use points on the tangent, not points on the curve. Reading two curve points gives a mean rate over that interval, which is a different number from the rate at the instant.
To find an instantaneous rate, use two points on the curve.
Dificuldade 1/5 · Moedas 100 + pequeno bônus na primeira conclusão hoje
Use points on the tangent.
The rate at a single time is the gradient of the tangent to the curve there. Measure rise over run using two distant points on the tangent. Convert to mol/s with $M_r$ or the molar gas volume.
Describe how to find the rate of reaction at 40 s from a graph of gas volume against time.
Tangent gradient.