Models, materials and iterative prototyping
Introduced| English | Meaning |
|---|---|
| prototype/ˈprəʊtəʊtaɪp/ | An early or representative model used to explore, test or describe a design. |
| model/ˈmɒdl/ | A simplified representation of a system used to explain, analyse or predict its behaviour. |
| iterative prototyping | building and testing a series of models, improving the design each time |
| material properties | characteristics of a material such as stiffness, strength, hardness and density |
| iteration/ˌɪtəˈreɪʃn/ | Repeating a sequence of instructions or calculations. |
5,127 prototypes, 1979–1984
- James Dyson was annoyed that his vacuum cleaner lost suction as its bag clogged. Over about five years he built 5,127 prototypes of a bagless cyclonic cleaner, changing one thing at a time and testing each. The first version went on sale in Japan in 1986.
- Each prototype was a model that answered a question. Iterative prototyping 迭代原型设计 uses models 模型 to test ideas and improve them, while material properties 材料性能 decide what each model can show.
How did Dyson develop his cleaner?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
5,127 prototypes.
Kinds of model
- Sketches and drawings: explore and communicate ideas fast. Physical models: card or foam to check size and feel.
- CAD and digital simulation: test strength or airflow before making. Prototypes: working versions for user testing.
Match each model to what it does best.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
Each model answers a question.
A model answers a question
- Decide what each model must test: fit, function, appearance or strength. A foam model can test grip, not strength.
- Change one variable at a time so the effect is clear.
You should change one variable at a time between prototypes.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Then the effect is clear.
Materials
- Properties: stiffness, strength, hardness, toughness, density, cost, recyclability.
- Choosing a stiffer material or a better cross-section reduces deflection under load.
Which are material properties?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
Properties decide performance.
Worked example: stiffening a shelf
A 3D-printed bracket prototype deflects 8 mm under a 50 N test load. The revision adds a triangular rib and keeps the same material.
- Revision result: deflection 5 mm under the same 50 N load.
- Percentage reduction: (8 − 5) ÷ 8 × 100 = 37.5%.
- Evaluation: the criterion is "under 4 mm", so it still fails. Next iteration: deepen the rib or change to a stiffer material — one change at a time.
At the same load, deflection changes from 12 mm to 9 mm. What is the percentage reduction?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
3 ÷ 12 × 100 = 25%.
Why does the 5 mm revision still fail?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Compare with the criterion.
Evaluate and record
- Compare each result with the criterion, not just the last version. Record the change, the test and the evidence.
- Stop iterating when the criteria are met, or the trade-offs are justified.
Changing several things at once hides the cause. If the rib and the material change together, you cannot tell which improved the result. Iterate one variable at a time.
Changing the rib and the material together shows which caused the improvement.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
It hides the cause.
Models — sketches, physical models, CAD and prototypes — each answer a question. Choose materials by their properties, change one variable per iteration, measure against the criterion and record the evidence.
Plan three iterations for a phone stand that tips over, saying what each model tests and what one variable changes.
Model, variable, test.