Water potential: include solute and pressure effects
Introduced| English | Meaning |
|---|---|
| water potential/ˈwɔːtə pəˈtenʃl/ | A measure of the tendency of water to move, determined by its free energy relative to pure water under specified conditions. |
| pressure potential/ˈpreʃə pəˈtenʃl/ | The contribution of physical pressure to water potential, measured relative to a reference pressure. |
What would explain this observation?
- A plant cell can stop gaining net water even while its contents contain solute. The cell wall permits pressure to build, altering the water-potential 水势 balance.
Build the model
- Water potential describes the tendency of water to move relative to a chosen reference, with pressure units.
- In the simplified cell model, water potential equals solute potential plus pressure potential 压力势.
- Dissolved solute lowers solute potential; positive pressure can raise water potential.
- Net water movement through a water-permeable membrane is from higher to lower water potential.
- water potential: A pressure-equivalent measure of the tendency of water to move relative to a reference.
- pressure potential: The pressure contribution to water potential in the stated model.
A cell is at −0.6 MPa and its surroundings at −0.1 MPa. Which net movement is predicted?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Water moves toward the more negative potential - from higher (-0.1 MPa) to lower (-0.6 MPa) - so it enters the cell. Negative values are normal here; "more negative is lower" is the rule to apply.
Match each technical term to its precise meaning.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
Use the definitions to distinguish related quantities and processes.
Choose evidence that can test it
- Compare the complete water potentials of the two sides rather than solute concentrations alone.
- A turgid cell can have the same total water potential as its surroundings despite unequal solute potential.
- At equilibrium there is no net transfer, but water molecules can continue moving in both directions.
In the lab: Use provided potential values and labelled plant-cell models. State the reference and units before adding components. For school tissue investigations, control temperature, tissue dimensions, time and blotting, and estimate a zero-change point from repeated measurements. Do not claim the mass method separately measures cell pressure without further evidence.
Which two habits make the investigation or model in this case more defensible?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
Stating the conditions and assumptions lets others repeat the work exactly, and recording the supporting evidence lets them check the conclusion. Hiding disagreeing results removes the evidence that could challenge a wrong conclusion, and one measurement can never establish a wider claim.
Work from known quantities
- Known: a cell has solute potential −0.8 MPa and pressure potential +0.3 MPa, so total potential is −0.5 MPa.
- Surrounding solution is −0.2 MPa.
- Water tends to enter the cell because −0.2 is higher than −0.5.
- If the cell components change to −0.8 and +0.6 MPa, its total is −0.2 MPa, matching the surroundings in this simplified model.
Your turn: Solute potential is −0.7 MPa and pressure potential is +0.4 MPa. Find total water potential.
Pressure can balance the solute effect
Cell potential −0.8 + 0.3 = −0.5 MPa is below the surrounding −0.2 MPa, so water tends to enter. Raising pressure to +0.6 MPa balances the potentials without removing solute.
Solute potential is −0.7 MPa and pressure potential is +0.4 MPa. Find total water potential.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
The result is -0.3 MPa. Known: solute potential -0.7 MPa; pressure potential +0.4 MPa. Use total potential = solute + pressure. Total = -0.7 + 0.4 = -0.3 MPa. Compare this total, not the solute term alone, with the surroundings.
Check the conclusion and its limits
- More negative is lower, not higher.
- The additive cell model has stated boundaries and does not require pretending that every real tissue has one uniform value.
- Loss of turgor and cell-wall support differ from a rigid wall directly controlling solute concentration.
Not true: Solute concentration alone always determines water movement in a turgid plant cell. In a turgid cell the wall pushes back: pressure potential opposes the solute effect, and movement depends on the SUM. Comparing solute effects alone requires equal pressure contributions and the stated membrane conditions.
- Water potential describes the tendency of water to move relative to a chosen reference, with pressure units.
- Compare the complete water potentials of the two sides rather than solute concentrations alone.
- Watch for: more negative is lower, not higher.
In a turgid cell the wall pushes back: pressure potential opposes the solute effect, and movement depends on the SUM.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
True. In a turgid cell the wall pushes back: pressure potential opposes the solute effect, and movement depends on the SUM. Comparing solute effects alone requires equal pressure contributions and the stated membrane conditions.
A pressure-equivalent measure of the tendency of water to move relative to a reference: write the technical term.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
water potential means A pressure-equivalent measure of the tendency of water to move relative to a reference.
Write from the data: find the water potential
- Solute potential is -0.9 MPa and pressure potential is +0.2 MPa. The surrounding solution is -0.4 MPa.
- Find the cell's water potential and the direction of net water movement.
A cell has solute potential -0.9 MPa and pressure potential +0.2 MPa. The surrounding solution is -0.4 MPa. What is the cell's water potential, and which way does water tend to move?
-0.9 plus 0.2 is -0.7. Water moves toward the lower water potential.
The HL written case has solute −0.9 MPa and pressure +0.2 MPa, with exterior −0.4 MPa. Find cell total and initial water direction.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Cell water potential = solute + pressure = −0.9 + 0.2 = −0.7 MPa. The exterior at −0.4 MPa has higher water potential, so water initially tends to enter the cell through a water-permeable membrane.
Explain solvation through water's polarity
- Water's oxygen region is partially negative and its hydrogen regions partially positive. Around dissolved sodium ions, oxygen faces inward; around chloride ions, hydrogen regions face inward. Ion–water attractions help surround and separate particles, rather than leaving all dissolved salt as intact grains.
- Glucose's polar hydroxyl groups can hydrogen-bond with water without glucose splitting into sodium-like ions. Solvation means solvent molecules surround solute particles. Ion–dipole attractions are not all hydrogen bonds, and neither interaction should be drawn as a new covalent water–solute backbone.

Which water orientation fits its polarity around a dissolved sodium ion?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Opposite charges attract: oxygen faces sodium, while hydrogen regions face a chloride ion. Ion–water attractions are distinct from simply calling all solvation bonds hydrogen bonds.
State the membrane and pressure conditions for osmosis
- Osmosis is net water movement through a selectively permeable membrane. At equal pressure, when relevant solutes cannot cross freely, the simpler comparison predicts net movement from less to more concentrated solution. Water molecules still cross both ways; a net direction reflects unequal opposing transfers.
- Without a separating membrane, solutes can also mix, making a different experiment. Water channels permit passive movement rather than pumping water against its relevant gradient. Energy can maintain solute distributions or support water removal elsewhere, without being the direct driver of osmosis itself.
Compare tonicity relative to a particular cell
- A hypotonic exterior favours net water entry, a hypertonic exterior net loss, and an isotonic exterior no sustained volume change under specified conditions. These descriptions are relational; a solution is not simply hypertonic without a comparison and membrane context.
- Effective solutes matter. Equal total solute concentration need not give equal tonicity if one solute enters cells readily. Isotonic does not mean chemically identical to cytoplasm, and steady volume does not mean molecular motion stops. Qualitative water-potential reasoning also accommodates pressure opposing net entry in walled cells.
Distinguish lysis and crenation from plasmolysis
- An animal cell lacks a rigid wall: sufficiently hypotonic surroundings cause swelling and can cause membrane rupture, while hypertonic surroundings cause shrinkage. A shrunken red cell can show crenation. The solution does not physically slice the membrane to cause osmotic lysis.
- Plasmolysis specifically involves membrane and contents withdrawing from a cell wall, so it is not the name for every shrinking animal cell. Freshwater organisms such as Paramecium use contractile vacuoles to collect and expel excess water with energy-dependent cellular support; they have not stopped water entering by osmosis.
Explain a wall-supported pressure response
- Water entry expands a plant cell's contents and vacuole against its wall, developing turgor. The wall resists further expansion and limits net entry; it does not become a selective lid closing every pore. Turgid cells help support soft tissues, while reduced turgor can make tissue flaccid or wilted.
- In a sufficiently hypertonic exterior, water loss shrinks the contents and may pull the membrane away from the wall. The wall itself need not shrink. Returning a suitable viable cell to hypotonic conditions can restore contact and turgor, but duration and membrane damage affect recovery. The membrane, rather than the relatively permeable wall, is the main selective boundary.

Control tissue preparation and the measurement procedure
- Use comparable tissue sources and dimensions, allocate independent pieces across approved concentrations, and control exposure time, temperature and solution volume. Cover containers where evaporation could alter concentration. Record instrument resolution, initial values and a consistent final measurement method.
- Blot consistently without squeezing variable amounts of water out; surface solution can otherwise mimic tissue gain. Repeat independent pieces, rather than counting repeated weighing of one piece as biological replication. For length, use a consistent axis and account for curvature; mass and length percentages need not be equal.
Use the initial mass and retain the sign
- An invented 5.00 g piece becoming 5.40 g gains 8%; a 4.00 g piece becoming 4.20 g gains 5%. Compare proportional changes rather than absolute gains alone. A 40.0 mm strip becoming 42.0 mm gains 5% in length, but this does not automatically determine its mass change.
- A piece changing from 3.00 to 3.36 g gains 12%; the reverse change loses about 10.7% because the starting denominator is now 3.36 g. A negative signed result records loss. Do not make equal absolute forward/reverse changes have equal percentage magnitudes by reusing the wrong initial value.
An invented tissue piece changes from 4.00 g to 3.60 g. Calculate signed percentage mass change relative to its initial mass.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
(3.60 − 4.00)/4.00 × 100 = −10%. The negative sign indicates loss; use the initial mass rather than the final value.
Interpolate locally between opposite signed means
- In an invented concentration series of 0.00, 0.10, 0.20, 0.30, 0.40 and 0.50 mol/L, mean mass changes are +12, +8, +4, −2, −6 and −10%. Zero lies between 0.20 and 0.30. A locally linear interpolation gives 0.20 plus four-sixths of 0.10, about 0.267 mol/L.
- The estimate is conditional on the local shape and sampled tissue; it is not an exact universal cell concentration. Sample closer to the crossing and use more independent pieces. Do not extrapolate a straight line far outside the data or interpret a guide line as proof of a linear mechanism.

Invented mean mass changes are +0.8% at 0.20 mol/L and −1.2% at 0.40 mol/L. Assuming a locally straight relationship, estimate the zero-change concentration.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
0.20 + [0.8/(0.8 + 1.2)] × (0.40 − 0.20) = 0.28 mol/L. This is conditional interpolation between nearby measurements, not a universal exact cellular concentration.
Separate biological spread from uncertainty of a mean
- For invented changes 3, 4, 5, 4 and 4%, mean change is 4%, sample SD about 0.71 percentage points and SE about 0.32. SD describes variation among pieces; SE estimates uncertainty of a mean under the sampling model. Identify what the bars display rather than treating every bar as the whole observed range.
- More independent pieces can reduce SE without reducing biological spread. Nearby pieces from one source may share conditions, and more repeated readings do not erase preparation bias. Overlapping SE bars alone are not a complete significance test; report sample number, statistic and suitable inference.
Five independent invented tissue percentage changes have sample SD √0.5 percentage points. Use SE = SD/√n to find SE in percentage points.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
√0.5/√5 = √0.1 ≈ 0.316, about 0.32 percentage points. SD concerns spread among pieces; SE estimates uncertainty in their mean under the independence model.
Keep zero net tissue change separate from complete equilibrium evidence
- Zero net mass change is consistent with an isotonic condition for the measured tissue and interval, while exchange continues. A whole tissue contains varied cells and spaces; the result does not show identical internal concentrations everywhere or independently measure pressure and solute contributions.
- Leakage, membrane injury, inadequate exposure time and surface-water errors can also affect mass. Check the experimental model before assigning every change solely to osmosis. Explain what was measured, what assumptions connect it with water balance, and what additional evidence would discriminate alternatives.
Apply isotonicity without treating it as a complete preservation recipe
- Avoiding sustained osmotic swelling or shrinkage is relevant to clinical fluids and transplant-organ preservation. A manufacturer's isotonic sodium-chloride label illustrates the property, rather than specifying an interchangeable treatment for every purpose.
- Composition, temperature, metabolism, oxygen supply where relevant and the recipient or tissue condition also matter. Isotonicity alone neither selects a clinical treatment nor preserves an organ indefinitely. The biological application concerns controlling membrane water balance alongside those other requirements.
Connect molecular interactions, cell structure and measured evidence
- Explain the solute–water interaction, selective membrane and stated pressure conditions before predicting net movement. Then distinguish the outcomes of a wall-free cell from wall-supported turgor and plasmolysis. Equilibrium means balanced transfer, rather than every molecule becoming stationary.
- For tissue data, show signed percentage change from the initial value, identify the local zero crossing and label uncertainty. State sample independence and alternative causes of mass change. A zero crossing supports a conditional tissue-level inference, not separate direct measurements of all intracellular components.
Plan a tissue-mass osmosis comparison and explain what a zero-change concentration can and cannot establish about cells and molecular movement.
The inference depends on selective-membrane and experimental assumptions as well as arithmetic.
AHL: Interpret potential as energy per volume relative to a reference
- Water potential is potential energy per unit volume, with pressure-equivalent units. In the course reference, pure water at atmospheric pressure and 20°C is assigned zero. This is a relative comparison, not an absolute energy count of every water molecule. One joule per cubic metre equals one pascal.
- One MPa equals 1,000 kPa; −0.20 MPa is −200 kPa, higher than −500 kPa. Net water tends towards lower potential along a suitable pathway. Applied positive pressure can raise pure-water potential above zero, so water potential is not universally negative.
AHL: Add both signed components before predicting movement
- At comparable height in the two-term cell model, total water potential is solute plus pressure potential. Solute potential is zero for pure water and negative for solutions. Turgid-cell pressure is generally positive relative to the reference; xylem tension can give a negative pressure contribution without implying a negative amount of water.
- For an invented cell, −800 kPa solute plus +300 kPa pressure gives −500 kPa total. Outside at −200 kPa is higher, so water initially enters. Compare the totals rather than solute alone. Equal pressure contributions can cancel in a comparison even when they are both nonzero, provided the other model conditions hold.

AHL: An invented cell has solute potential −800 kPa and pressure potential +300 kPa. Calculate total water potential in the two-term model.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
−800 + 300 = −500 kPa. An exterior at −200 kPa is higher, supporting initial net water entry along a suitable pathway.
AHL: Rearrange for pressure and qualify a fixed-solute calculation
- If total potential is −350 kPa and solute potential −900 kPa, pressure is −350 minus −900, or +550 kPa. Subtract the signed value correctly; it is not −1,250. Different component pairs can give the same total, so equilibrium does not require equality of each component separately.
- Holding solute potential at −800 kPa, a pressure of +600 gives total −200 and matches the example exterior. That is a conditional model: real water entry dilutes solutes as well as raising pressure, so solute potential need not stay fixed. State what is held constant before predicting an equilibrium component.
AHL: An invented cell has total water potential −400 kPa and solute potential −850 kPa. Find its pressure potential in the two-term model.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
Pressure = total − solute = −400 − (−850) = +450 kPa. Subtract the negative solute value rather than adding both negative magnitudes.
AHL: Follow both changing components during water loss
- An invented cell with solute −700 and pressure +400 kPa has total −300. Outside at −600, water initially leaves, even though the internal solute contribution alone is −700. Water loss can concentrate solutes and reduce pressure, changing both terms.
- At incipient plasmolysis, the simple model takes pressure potential as approximately zero, so total approximately equals solute potential. Net entry into a flaccid cell instead raises pressure and dilutes contents. Height and surface interactions can matter in other situations; the two-term same-height model does not describe every possible water-potential problem.
AHL: An invented cell has solute −700 kPa and pressure +400 kPa; outside total is −600 kPa. Which initial direction follows in the stated model?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Add both internal components first. Ignoring +400 kPa gives the wrong initial direction; both pressure and solute terms can subsequently change as water moves.
AHL: Reconcile calculated potentials with the tissue investigation
- Convert units, retain signs, add components and compare whole potentials before giving a movement direction. Identify when a statement fixes solute potential, pressure or height. At matching total potentials, molecular exchange can continue and solute concentrations can remain different.
- Tissue mass change alone cannot independently recover both solute and pressure potentials. Combine appropriate measurements if a question needs those separate values, and distinguish an initial direction prediction from a fully modelled final equilibrium. A correct sum still needs a clearly labelled reference, boundary and biological assumption.