Trigonometric phase and parametric curves
Introduced| English | Meaning |
|---|---|
| amplitude/ˈæmplɪtjuːd/ | The maximum displacement from an equilibrium position. |
| phase/feɪz/ | An angular offset relative to a chosen periodic reference. |
| cusp/kʌsp/ | A sharp point where two distinct branches meet and turn back along a common tangent line. |
Same wave, different start
- Two sensors can record waves with the same height and spacing but different timing. The graphs $y=2\cos3x$ and $y=-2\cos3x$ have the same amplitude 振幅 and period; at $x=0$, one is at a peak and the other at a trough.
- Their phase 相位 differs relative to a chosen reference. In parametric motion, a different start or direction can also change how a curve is traced without changing its Cartesian equation.
Read amplitude, midline and period
- For $y=A\cos(\omega x-\varphi)+D$, with $A\ne0$ and $\omega\ne0$, the amplitude is $|A|$, the midline is $y=D$, and the fundamental period is $2\pi/|\omega|$. The range is $[D-|A|,D+|A|]$.
- A negative coefficient does not give a negative amplitude. For $-3\cos2x+5$, the amplitude is $3$ and the range is $[2,8]$. If $A=0$ or $\omega=0$, the function is constant: it has every positive period and no least positive period.
What is the period of $y = 5\sin(4x + 1)$? Give a decimal to three places.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
The nonconstant wave has period 2π/|4|=π/2≈1.571. Amplitude 5 and the argument offset do not change its period. In the form 4x−φ, the phase offset is φ=-1.
What is the amplitude of $y=-3\cos2x+5$?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
Amplitude is the magnitude of the oscillating coefficient. The negative sign changes phase, and 5 sets the midline.
Factor the argument to find the shift
- Fix a reference wave with positive amplitude and positive angular frequency. In $A\cos(\omega x-\varphi)+D$, the angle offset is $\varphi$, while the horizontal shift is $h=\varphi/\omega$. Factoring gives $\omega(x-h)$.
- For $\cos(2x-\pi/2)$, factor the argument as $2(x-\pi/4)$: the shift from $\cos2x$ is right by $\pi/4$. Similarly $5\sin(4x+1)$ has period $\pi/2$ and is shifted left by $1/4$ relative to $5\sin4x$; in the minus-offset convention, $\varphi=-1$.
$y = \cos(2x - \pi/2)$ is $y = \cos 2x$ shifted right by
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Write cos(2x − π/2) = cos 2(x − π/4). The shift is φ/ω = (π/2)/2 = π/4 to the right, not π/2.
Absorb a negative sign into the phase
- The identity $-\cos\theta=\cos(\theta-\pi)$ gives $-2\cos3x=2\cos(3x-\pi)$. With positive amplitude, the offset is $\pi$ and one rightward shift is $\pi/3$.
- Peaks satisfy $3x-\pi=2\pi k$, so $x=\pi/3+2\pi k/3$ for integers $k$. Also $\sin x=\cos(x-\pi/2)$: switching sine to cosine can describe a phase change while leaving amplitude and period fixed.
Equivalent phases are not unique shifts
- Adding $2\pi k$ to an angle offset gives the same sine or cosine graph. The corresponding horizontal shifts differ by $kT$, where $T=2\pi/\omega$ for positive $\omega$. State the reference wave when reporting a shift.
- Phase is an angle; shift has the units of $x$. Convert using $h=\varphi/\omega$, rather than equating the two quantities. At zero offset, the shift is zero for every nonzero $\omega$; their numerical equality is not limited to $\omega=1$.
Adding $2\pi$ to the phase offset of a cosine wave changes its graph.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Cosine is 2π-periodic in its argument. The resulting horizontal shift changes by one full period, which gives the same graph.
A crossing needs a direction
- Both $\cos x$ and $-\cos x$ are zero at $x=\pi/2$, but their slopes there are $-1$ and $+1$. A crossing height alone cannot distinguish a falling wave from a rising one.
- The usual trigonometric derivative formulas use radians. For $A\cos(\omega x-\varphi)+D$, the derivative is $-A\omega\sin(\omega x-\varphi)$. Check the crossing direction as well as its position when identifying a phase.
What changed from y = cos x?
Distinguish amplitude, period and phase changes from y = cos x.
Rewrite $y=-3\sin(2x+\pi/3)+4$ with a positive sine coefficient. Find its amplitude, midline, range and period, one rightward shift relative to $3\sin2x+4$, and one peak location.
Compare the reference wave, parameter range and tangent assumptions with the model.
Elimination gives a relation, not the whole trace
- A parametrization gives coordinates $x(t),y(t)$ for a specified set of $t$ values. For $x=t+1$, $y=t^2$, and $0\le t\le2$, elimination gives $y=(x-1)^2$ together with $1\le x\le3$.
- Every allowed parameter gives a point on that restricted parabola. Conversely, any point satisfying the equation and range is recovered by $t=x-1$. Without the range, the equation would include extra points. It also does not record which direction the parameter travels.
Eliminate the parameter of an ellipse
- If $x=2\cos t$ and $y=\sin t$, then $x^2/4+y^2=1$. Conversely, a point satisfying this equation has $(x/2,y)$ on the unit circle, so an angle $t$ recovers it. A full interval $0\le t\le2\pi$ covers the ellipse.
- Restricting to $0\le t\le\pi/2$ instead gives only the first-quadrant arc, including $(2,0)$ and $(0,1)$. The same equation with $x\ge0$ and $y\ge0$ describes exactly that restricted point set.
Keep direction and number of circuits
- On the full ellipse, $t=0$ gives $(2,0)$ and $t=\pi/2$ gives $(0,1)$: increasing $t$ traces counter-clockwise. The endpoint $2\pi$ returns to the start. Replacing $y=\sin t$ by $y=-\sin t$ reverses direction.
- Replacing both arguments by $2t$ makes two circuits over $0\le t\le2\pi$. Restricting the original parameter to $0\le t\le\pi$ reaches only the upper half, from $(2,0)$ to $(-2,0)$. Neither multiplicity nor range follows from the Cartesian equation alone.
How many complete circuits does $x=2\cos2t$, $y=\sin2t$ make for $0\le t\le2\pi$?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
The angle 2t runs from 0 to 4π, so the ellipse is traversed twice; the final endpoint returns to the start.
Restrictions matter on circles and astroids
- For $x=\cos t$, $y=\sin t$, and $0\le t\le\pi$, the exact trace is the upper semicircle, including both endpoints. The equation $x^2+y^2=1$ must be accompanied by $y\ge0$.
- For $x=\cos^3t$, $y=\sin^3t$, the relation is $|x|^{2/3}+|y|^{2/3}=1$, using real nonnegative powers. With $0\le t\le\pi/2$, keep $x,y\ge0$: the arc runs from $(1,0)$ to $(0,1)$. Conversely, the nonnegative cube roots of any point on that arc give a unit-circle angle in the allowed interval.
The curve $x = \cos t$, $y = \sin t$, $0 \le t \le \pi$, is the whole unit circle.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
False. x² + y² = 1 holds, but for 0 ≤ t ≤ π we have y = sin t ≥ 0, so the curve is only the upper semicircle. The parameter range matters.
For $x=t^2$, $y=t$, with $-1\le t\le2$, which describes the exact point set?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Eliminating gives x=y², but the original parameter equals y, so retain -1≤y≤2. Conversely, every point with these conditions is recovered by t=y.
For $x=1+3\cos t$, $y=-2+2\sin t$, with $-\pi/2\le t\le\pi/2$, find the exact Cartesian trace, its endpoints and its direction. Justify that your restrictions are sufficient.
Compare the reference wave, parameter range and tangent assumptions with the model.
Derive a slope from the parameter
- For continuously differentiable coordinates with $x'(t)\ne0$, the curve is locally a graph of $y$ against $x$. The chain rule gives $y'(t)=(dy/dx)x'(t)$, hence $dy/dx=y'(t)/x'(t)$.
- On $x=2\cos t$, $y=\sin t$ at $t=\pi/4$, the coordinate derivatives are $-\sqrt2$ and $\sqrt2/2$. The slope is $-1/2$ at $(\sqrt2,\sqrt2/2)$. Divide the coordinate derivatives, not the coordinates themselves.
Regular horizontal and vertical tangents
- If $y'(t)=0$ and $x'(t)\ne0$, the tangent is horizontal. If $x'(t)=0$ and $y'(t)\ne0$, it is vertical. In both cases the velocity vector is nonzero; a vertical tangent does not mean the motion stops.
- On the ellipse, $t=0$ gives velocity $(0,1)$ and vertical tangent $x=2$. At $t=\pi/2$ the velocity is $(-2,0)$ and the tangent is $y=1$. If both coordinate derivatives vanish, neither regular test applies.
If $x'(0)=0$ and $y'(0)\ne0$, the parametrized motion is stationary at $t=0$.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
The velocity vector (0,y′(0)) is nonzero. This is a regular vertical tangent, not zero velocity.
Work the original polynomial curve
- For $x=t^2+1$, $y=t^3-3t$, the derivatives are $x'=2t$ and $y'=3t^2-3$. At $t=2$, the point is $(5,2)$ and the slope is $9/4$. The tangent line is $y-2=(9/4)(x-5)$.
- Horizontal tangents occur at $t=\pm1$, where $y'=0$ and $x'\ne0$: the points are $(2,-2)$ and $(2,2)$. At $t=0$, the point is $(1,0)$ with velocity $(0,-3)$, so the tangent is vertical, $x=1$.
$x = t^2 + 1$, $y = t^3 - 3t$. Find $dy/dx$ at $t = 2$.
Difficulty 2/5 · 140 coins + a small bonus on first completion today
dy/dx = (dy/dt)/(dx/dt) = (3t² − 3)/(2t). At t = 2: (12 − 3)/4 = 9/4 = 2.25.
For $x = t^2 + 1$, $y = t^3 - 3t$, horizontal tangents occur at
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Solve y′=3t²−3=0, giving t=±1. At both values x′=2t is nonzero. The corresponding points are (2,-2) and (2,2); t=0 instead gives a regular vertical tangent.
For $x=t^2+1$, $y=t^3-3t$, find the tangent line at $t=-2$ and the tangent line at $t=0$. Explain why different derivative tests apply.
Compare the reference wave, parameter range and tangent assumptions with the model.
Zero velocity: inspect the curve
- For $x=t^2$, $y=t^3$, both derivatives vanish at $t=0$. For nearby nonzero $t$, the derivative quotient is $3t/2\to0$. Secant slopes from the origin also satisfy $y/x=t\to0$, giving horizontal tangent $y=0$.
- The point set satisfies $y^2=x^3$ with $x\ge0$. Its lower and upper branches meet in a cusp 尖点 at the origin: as $t$ crosses zero, the motion turns back toward increasing $x$. The cusp conclusion uses this geometry, not merely the indeterminate quotient $0/0$.
The same zero velocity can lie on a straight line
- For $x=t^3$, $y=t^3$, both derivatives again vanish at zero. But the point set is the straight line $y=x$, and $t$ increases through the origin without turning back. For nonzero $t$, both the derivative ratio and the origin secant slope are $1$.
- Reparametrize the same line as $(x,y)=(u,u)$ and the velocity becomes $(1,1)$. Zero velocity can therefore be a property of the chosen parametrization, while the geometric curve is regular.
The parametrization $x=t^3$, $y=t^3$ has a cusp at the origin because both coordinate derivatives vanish there.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Its point set is the straight line y=x, with secant slope 1 through the origin. A regular parametrization is (u,u); the zero velocity belongs to the chosen parametrization.
Zero velocity need not give a unique tangent
- Define $x=t^3$ and $y=t^3\sin(1/t)$ for $t\ne0$, with both coordinates zero at $t=0$. Both derivatives at zero are zero: the coordinate difference quotients are $t^2$ and $t^2\sin(1/t)$, which tend to zero.
- Yet origin secant slopes are $y/x=\sin(1/t)$. They approach both $1$ and $-1$ along sequences tending to zero, so there is no unique tangent line. When regular derivative tests fail, investigate the trace and the limits of secant directions.
Which derivative test applies?
Use regular tangent tests and investigate zero velocity separately.
At the origin compare (i) $x=t^3$, $y=2t^3$; (ii) $x=t^2$, $y=t^3$; and (iii) $x=t^3$, $y=t^3\sin(1/t)$, extended by zero at $t=0$. All have zero velocity there. Find the tangent behavior and explain which, if any, has a cusp.
Compare the reference wave, parameter range and tangent assumptions with the model.
One point can have two parameter passes
- On the original polynomial curve, $t=\sqrt3$ and $t=-\sqrt3$ both give the point $(4,0)$. Both velocities are nonzero, but they describe different passes through the same spatial point.
- The slopes are $6/(2\sqrt3)=\sqrt3$ and $6/(-2\sqrt3)=-\sqrt3$. Thus two tangent lines cross at $(4,0)$. Retain the parameter value when a question asks for a tangent, rather than assuming one tangent belongs to each plotted point.
For $x=t^2+1$, $y=t^3-3t$, what are the tangent slopes at the two passes through $(4,0)$?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
The parameter values are ±√3. The derivatives give slopes 6/(±2√3)=±√3.
Recap
- amplitude: The magnitude of the oscillation from its midline to a peak.
- phase: An angular offset relative to a chosen periodic reference.
- cusp: A sharp point where two distinct branches meet and turn back along a common tangent line.