Fields, motors and induction
Introduced| English | Meaning |
|---|---|
| magnetic field/mæɡˈnetɪk fiːld/ | A region in which magnetic materials, moving charges or currents experience magnetic forces. |
| electromagnetic induction/ɪˌlektrəʊməɡˈnetɪk ɪnˈdʌkʃn/ | The production of an electromotive force when magnetic flux linkage changes. |
| transformer/trænsˈfɔːmə/ | A device that changes alternating potential difference using electromagnetic induction between coils. |
| solenoid/ˈsəʊlənɔɪd/ | A coil of wire that produces a magnetic field when an electric current flows through it. |
| magnetic flux density/mæɡˈnetɪk flʌks ˈdensɪti/ | The strength of a magnetic field, measured in tesla; B in F = BIL. |
| induces | Produces a potential difference or current in a conductor by a changing magnetic field. |
| induction/ɪnˈdʌkʃn/ | Electromagnetic induction: producing a potential difference in a conductor by a changing magnetic field. |
Faraday's ring, 29 August 1831
- Michael Faraday wound two coils of wire on opposite sides of an iron ring. When he connected a battery to one coil, a needle connected to the other coil jumped — but only at the moment he connected or disconnected it.
- A changing magnetic field had made a current in a separate wire. This is electromagnetic induction 电磁感应, the principle behind every power station and transformer.
Magnetic fields
- A magnetic field 磁场 is the region where a magnet or a current feels a force. Field lines go from north to south, and they are closest together where the field is strongest.
- A current makes its own field: circles around a straight wire, and a field like a bar magnet's around a solenoid 螺线管. Adding an iron core makes an electromagnet.
Where is the magnetic field around a bar magnet strongest?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Field-line spacing shows strength; the lines crowd together at the poles.
The motor effect
- A wire carrying a current across a magnetic field feels a force: $F = BIL$, where $B$ is the magnetic flux density 磁通量密度 in tesla. Fleming's left-hand rule gives the direction.
- In a motor, the forces on the two sides of a coil point opposite ways, so the coil turns. A split-ring commutator reverses the current every half turn to keep it turning.
A 0.20 m wire carries 3.0 A at right angles to a field of 0.50 T. What is the force on it?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
$F = BIL = 0.50 \times 3.0 \times 0.20 = 0.30$ N.
Generators and transformers
- Moving a wire through a field, or changing the field through a coil, induces 感应 a potential difference. A faster change gives a bigger p.d.; a generator turns a coil in a field to make alternating current.
- A transformer 变压器 has two coils on an iron core. Alternating current in the primary makes a changing field, which induces a p.d. in the secondary: $\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p}$.
Turns set the AC voltage ratio
Fewer secondary turns reduce voltage; more secondary turns increase it.
Which changes increase the p.d. induced when a magnet is pushed into a coil?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
Each makes the field through the coil change faster or affects more turns. A magnet at rest induces nothing.
Worked example: the transformer
A transformer has 200 turns on the primary and 50 on the secondary. The primary is connected to 12 V a.c. Find the output p.d. If the secondary current is 2.0 A, find the primary current, assuming 100 % efficiency.
- Output: $V_s = V_p \times \dfrac{N_s}{N_p} = 12 \times \dfrac{50}{200} = 3.0$ V — a step-down transformer.
- Power in = power out: $V_p I_p = V_s I_s$, so $12 \times I_p = 3.0 \times 2.0$.
- Primary current: $I_p = \dfrac{6.0}{12} = 0.50$ A. Stepping the p.d. down steps the current up.
A transformer has 1000 primary turns and 50 secondary turns. The input is 230 V. What is the output?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
$V_s = 230 \times \dfrac{50}{1000} = 11.5$ V.
An ideal transformer steps 230 V down to 12 V. The output current is 4.6 A. What is the input current?
Difficulty 2/5 · 140 coins + a small bonus on first completion today
$230 \times I_p = 12 \times 4.6 = 55.2$, so $I_p = 0.24$ A.
The National Grid
- Power stations step the p.d. up to about 400 000 V for the transmission lines. For the same power, $P = IV$ means a much smaller current.
- Power lost as heat in the cables is $P = I^2R$, so cutting the current by 100 times cuts the loss by 10 000 times. Step-down transformers then bring it to 230 V for homes.
Why is electricity sent across the country at very high p.d.?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
For the same power, high p.d. means low current, and heating loss is $I^2R$.
A transformer does not work on direct current. A steady current makes a steady field, and induction needs a changing field. Faraday saw the needle move only when he switched on or off; with a constant current the output is zero.
A transformer connected to a steady 12 V battery gives a steady output p.d.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
A steady current makes a steady field, so nothing is induced. Transformers need alternating current.
Currents make magnetic fields, and a current in a field feels a force, $F = BIL$, which drives motors. A changing magnetic field induces a p.d., which drives generators and transformers. Transformers use $\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p}$ and let the grid send power at high voltage and low current.
Explain how a transformer steps 230 V down to 5 V for a phone charger.
The answer needs "changing" and the turns ratio.