본문 바로가기

국제바칼로레이트 · IB Diploma

Design Technology · HL

이 과정의 문제지, 표본 및 커리큘럼 문서입니다.

← 시험

핸드아웃, 연습지 및 슬라이드

공유된 주제 문서는 출처 과정 및 주제 제목을 유지합니다. 선택한 보드의 규정을 사용하여 커버리지, tiers 및 고사 요건을 적용하십시오.

교재 자료 · 국제바칼로레이트 · IB Diploma · Design Technology · HL (4)
연습지 · 국제바칼로레이트 · IB Diploma · Design Technology · HL (11)
프레젠테이션 슬라이드 · 국제바칼로레이트 · IB Diploma · Design Technology · HL (4)
연습 walkthrough 슬라이드 · 국제바칼로레이트 · IB Diploma · Design Technology · HL (11)

과정 단위 및 학습 목표

이 수업은 선택된 과정 목표를 다룹니다. 나머지 미달성 항목을 확인하십시오. 이 자료는 완전한 준비 프로그램이 아닙니다.

A · 이론적 설계
  • Designing the fit between people, tasks and products.
  • Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
  • Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
  • Measurement of human body dimensions for a specified population and method.
  • A clearance dimension often needs to consider larger relevant body dimensions, while reach can require smaller relevant dimensions. Neither principle automatically selects a universal percentile. The measured population, posture, clothing, capability and task determine relevance. Consider physical, perceptual and cognitive demands together rather than assuming body size explains every usability issue.
  • Define a consenting user group and task. Use attributed data or anonymous teacher-approved measurements, record measurement posture and units, and test safe low-fidelity models before construction. Include users whose access needs differ. Set measurable acceptance criteria and retain qualitative feedback about grip, visibility and comprehension alongside dimensions.
인체공학
설계를 위해 사람, 작업, 시스템 간의 상호작용을 연구함
사양서
제안된 해결책이 충족해야 하는 측정 가능한 요구사항
인체측정학
특정 집단을 위한 신체 치수 측정 및 방법
B · 실무 설계
  • A developing version used to test a solution.
  • State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
  • Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
  • The allowed range of variation in a specified dimension.
  • For a worst-case clearance model, subtract the largest shaft from the smallest hole for minimum clearance, and the smallest shaft from the largest hole for maximum clearance. The calculation assumes the stated dimensional limits and ideal geometry. Shape, alignment, temperature and measurement uncertainty can affect actual assembly.
  • Use safe school-made models or a provided dimension dataset. Specify dimension units, nominal values and limits before testing. Measure with an appropriate calibrated instrument at agreed positions, record every result and classify against the specified range. Retain rejected pieces and explain whether the problem concerns the design limits, process variation or measurement method.
프로토타입
해결책을 테스트하기 위해 사용하는 개발 중 버전
반복(iteration)
증거와 반복적인 테스트에 기반한 개선
내성(tolerance)
특정 치수에서 허용되는 변동 범위
간격
제시된 모델에 따른 결합 부품 사이의 치수 간격
C · 맥락 속의 설계
  • Design supporting separation and replacement of parts.
  • Compare a common service over a stated lifetime. Separate fixed tooling cost from cost per item. Include repair, energy, transport and realistic end-of-life pathways rather than using a recycled label as the whole judgement.
  • Create a bill of materials and an annotated assembly plan. Test whether a worn part can be replaced with normal tools. For HL project development, evaluate production feasibility and commercial assumptions against the applicable cohort guide.
분해 설계
부품의 분리 및 교체를 지원하는 설계
내성(tolerance)
허용되는 치수 변동
Project · 설계 프로젝트
  • Designing the fit between people, tasks and products.
  • Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
  • Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
  • A developing version used to test a solution.
  • State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
  • Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
인체공학
사람, 작업 및 제품 간의 적합성 설계
사양서
제안된 해결책이 충족해야 하는 측정 가능한 요구사항
프로토타입
해결책을 테스트하기 위해 사용하는 개발 중 버전
반복(iteration)
증거와 반복적인 테스트에 기반한 개선

해당 자격증 대비

  • The official 2027 update confirms design in theory, design in practice and design in context.
  • Do not display old 2016 Topics 1–10 or its 40% design-project model as the current 2027 assessment.
  • The school project needs user evidence, measurable specification, concepts, supervised prototype/testing and evaluation; written diagnostics cannot replace it.
  • SL/HL objective and assessment differences remain unverified until current guide retrieval succeeds.

여전히 필요한 교육 범위

  • Exact 2027 topic codes and SL/AHL scope await the full guide.
  • Exact 2027 modelling/material/production objectives await the full guide.
  • Exact 2027 social/environmental/commercial objectives and AHL distinctions await the guide.
  • Use a real school-supervised design problem; current rubric and SL/HL project demands await the guide.

규격 서식 및 표본 문서

과정 자료

수업 준비

문서가 이용 가능합니다. 모든 과정에 대해 보드별 노트, 평가 및 상호작용형 과거 문제집 연습이 제공되지는 않습니다.

수업 →

로그인 또는 계정 만들기

IGCSE, A-Level & AP