Required Practical 1: prepare pure, dry soluble salt crystals
Introduit| English | Sens |
|---|---|
| excess/ekˈses/ | Present in more than the amount needed to react completely with the limiting reactant. |
| crystallisation/ˌkrɪstəlaɪˈzeɪʃn/ | cristallisation |
Blue crystals from black powder
- Copper oxide is a dull black powder. Copper sulfate forms bright blue crystals, used for centuries to kill fungus on grape vines.
- In Required Practical 1 you turn one into the other, and end with pure, dry crystals of a soluble salt.
Step 1: react with excess solid
- Warm about 40 cm³ of dilute sulfuric acid in a beaker. Add copper oxide a spatula at a time, stirring, until some black solid stays undissolved.
- That leftover solid is in excess 过量: it shows all the acid has reacted.
How do you know all the acid has reacted?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
Leftover solid shows excess.
Step 2: filter
- Filter the mixture. The unreacted copper oxide stays in the filter paper.
- The blue filtrate is copper sulfate solution, with no acid left in it.
What passes through the filter paper?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
The solid stays behind.
Worked example: the equation and the salt
Write the equation and explain why excess copper oxide is used.
- Equation: $\text{CuO} + \text{H}_2\text{SO}_4 \rightarrow \text{CuSO}_4 + \text{H}_2\text{O}$.
- Why excess: once some CuO cannot dissolve, no acid is left, so the salt is not contaminated with acid.
- Why filter: the excess solid is insoluble, so it can be removed completely.
Copper oxide and sulfuric acid make copper sulfate
Required Practical 1: CuO + H₂SO₄ → CuSO₄ + H₂O. Excess black oxide uses up the acid and is filtered off; the blue solution is crystallised. Try a carbonate to see which product is a gas.
If copper carbonate is used instead of copper oxide, what extra product forms?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
Carbonates give CO₂.
Which reactants would you use to make zinc chloride crystals?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
Metal from the base, chloride from HCl.
Step 3: concentrate
- Heat the solution gently in an evaporating basin over a water bath until about half the water has gone, or crystals start to form at the edge.
- Do not boil it dry: that can break down the hydrated crystals.
The solution should be boiled until completely dry.
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
Concentrate gently, then crystallise.
Step 4: crystallise and dry
- Crystallisation 结晶: leave the solution to cool slowly. Larger crystals form as the water evaporates.
- Pour off the remaining liquid and pat the crystals dry with filter paper.
Put the steps of Required Practical 1 in order.
Difficulté 3/5 · 200 pièces + un petit bonus lors de la première réussite aujourd'hui
React, filter, concentrate, crystallise.
Evaporating to dryness is not the same as crystallisation. Heating until all the water is gone gives a powder, may decompose the salt and spits hot solid. Concentrate, then let the crystals grow as it cools.
To make a soluble salt, react an acid with excess insoluble base or carbonate, filter off the excess, heat the filtrate gently to concentrate it, then leave it to crystallise and dry the crystals.
Describe how to make pure, dry crystals of magnesium sulfate from magnesium oxide.
Four stages.