Metals and alloys: distort the layers to resist sliding
| English | Français |
|---|---|
| alloy/ˈælɔɪ/ | alliage |
| hardness/ˈhɑːdnəs/ | dureté |
What would explain this observation?
- A pure metal’s regular layers can slide when a force is applied. Introducing different-sized atoms can hinder that sliding, helping explain why an alloy 合金 is harder.
- Start with a prediction. State the quantities or features you would compare, then decide what evidence could distinguish two explanations.
Build the model
- Most metals have high melting and boiling points because their giant structures have strong metallic bonding. Atoms in a pure metal are represented in regular layers, which can move past one another while attraction to delocalised electrons persists. This permits bending and shaping. Pure metals can be too soft for particular uses, so they are mixed with other elements to form alloys.
- alloy: A metallic mixture containing a metal and one or more other elements; hardness 硬度: Resistance of a material to indentation or scratching.
Why can an alloy be harder than its pure metal?
Different-sized atoms distort the regular layers and make sliding more difficult, so many alloys are harder than the corresponding pure metal. Hardness is resistance to indentation or scratching, while strength concerns resisting deformation or failure under a load; do not treat the words as identical measurements. An alloy still has metallic bonding and need not have one fixed compound formula.
Match each technical term to its precise meaning.
Use the definitions to distinguish related quantities and processes.
Choose evidence that can test it
- Different-sized atoms distort the regular layers and make sliding more difficult, so many alloys are harder than the corresponding pure metal. Hardness is resistance to indentation or scratching, while strength concerns resisting deformation or failure under a load; do not treat the words as identical measurements. An alloy still has metallic bonding and need not have one fixed compound formula.
- Compare equal-size atom layers with a model containing some larger atoms. Show the disruption and explain its effect rather than merely saying alloy atoms are bigger. Use supplied hardness data and actual teacher-approved samples with suitable tools. Compare the same test method and conditions; an arbitrary harder sample does not establish how every possible alloy behaves.
Which two habits make the investigation or model in this case more defensible?
Compare equal-size atom layers with a model containing some larger atoms. Show the disruption and explain its effect rather than merely saying alloy atoms are bigger. Use supplied hardness data and actual teacher-approved samples with suitable tools. Compare the same test method and conditions; an arbitrary harder sample does not establish how every possible alloy behaves.
Work from known quantities
- State the known values and their units. Choose the relation because its assumptions fit this case, then rearrange before substitution.
- Known: supplied model hardness values are 40 units for a pure metal and 70 for an alloy measured by the same method. Increase=70−40=30 units; percentage increase=30/40×100=75%. These fictional values quantify one comparison and are not universal values or a complete explanation of the structural cause.
A supplied hardness rises from 50 to 80 units. Calculate the percentage increase. Use the same sequence: known quantities → model → relation → substitution → unit and interpretation.
A supplied hardness rises from 50 to 80 units. Calculate the percentage increase.
The result is 60 %. Known: supplied model hardness values are 40 units for a pure metal and 70 for an alloy measured by the same method. Increase=70−40=30 units; percentage increase=30/40×100=75%. These fictional values quantify one comparison and are not universal values or a complete explanation of the structural cause.
Check the conclusion and its limits
- An alloy is a mixture, not automatically a new compound with fixed proportions. Added atoms hinder sliding without removing all delocalised electrons. A layer model omits real defects and three-dimensional detail, and high melting point is typical rather than universal for metals.
- Return to the original observation. Explain what the result supports, which conditions it assumes, and one way to test a competing explanation.
An alloy must always be a compound with one fixed atom ratio. This claim is false: An alloy is a mixture, not automatically a new compound with fixed proportions. Added atoms hinder sliding without removing all delocalised electrons. A layer model omits real defects and three-dimensional detail, and high melting point is typical rather than universal for metals.
Metals and alloys: distort the layers to resist sliding: Different-sized atoms distort the regular layers and make sliding more difficult, so many alloys are harder than the corresponding pure metal. Hardness is resistance to indentation or scratching, while strength concerns resisting deformation or failure under a load; do not treat the words as identical measurements. An alloy still has metallic bonding and need not have one fixed compound formula.
An alloy must always be a compound with one fixed atom ratio.
An alloy is a mixture, not automatically a new compound with fixed proportions. Added atoms hinder sliding without removing all delocalised electrons. A layer model omits real defects and three-dimensional detail, and high melting point is typical rather than universal for metals.
A metallic mixture containing a metal and one or more other elements: write the technical term.
alloy means A metallic mixture containing a metal and one or more other elements.