Passer au contenu

Baccalauréat international · IB Diploma

Design Technology · HL

Dossiers, échantillons et documents de programme pour ce cours.

← Examens

Fiches, feuilles d'exercices et diapositives

Les documents de sujet partagés conservent leurs titres de cours et de sujet d'origine. Utilisez la spécification de votre tableau choisi pour la couverture, le niveau et les exigences d'examen.

Supports de cours · Baccalauréat international · IB Diploma · Design Technology · HL (4)
Fiches d'exercices · Baccalauréat international · IB Diploma · Design Technology · HL (11)
Diaporamas de présentation · Baccalauréat international · IB Diploma · Design Technology · HL (4)
Diaporamas de walkthrough d'exercices · Baccalauréat international · IB Diploma · Design Technology · HL (11)

Unités de cours et objectifs d'apprentissage

Ces leçons abordent des objectifs de cours sélectionnés. Vérifiez les lacunes restantes en couverture ; ce matériel ne constitue pas un programme d'entraînement complet.

A · Conception théorique
  • Designing the fit between people, tasks and products.
  • Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
  • Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
  • Measurement of human body dimensions for a specified population and method.
  • A clearance dimension often needs to consider larger relevant body dimensions, while reach can require smaller relevant dimensions. Neither principle automatically selects a universal percentile. The measured population, posture, clothing, capability and task determine relevance. Consider physical, perceptual and cognitive demands together rather than assuming body size explains every usability issue.
  • Define a consenting user group and task. Use attributed data or anonymous teacher-approved measurements, record measurement posture and units, and test safe low-fidelity models before construction. Include users whose access needs differ. Set measurable acceptance criteria and retain qualitative feedback about grip, visibility and comprehension alongside dimensions.
ergonomie
Étude des interactions entre les personnes, les tâches et les systèmes pour éclairer la conception
spécification
Exigences mesurables qu'une solution proposée doit satisfaire
anthropométrie
Mesure des dimensions du corps humain pour une population et une méthode spécifiées
B · Conception pratique
  • A developing version used to test a solution.
  • State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
  • Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
  • The allowed range of variation in a specified dimension.
  • For a worst-case clearance model, subtract the largest shaft from the smallest hole for minimum clearance, and the smallest shaft from the largest hole for maximum clearance. The calculation assumes the stated dimensional limits and ideal geometry. Shape, alignment, temperature and measurement uncertainty can affect actual assembly.
  • Use safe school-made models or a provided dimension dataset. Specify dimension units, nominal values and limits before testing. Measure with an appropriate calibrated instrument at agreed positions, record every result and classify against the specified range. Retain rejected pieces and explain whether the problem concerns the design limits, process variation or measurement method.
prototype
Une version en développement utilisée pour tester une solution
itération
Révision guidée par des preuves et des tests répétés
tolérance
La plage de variation autorisée pour une dimension spécifiée
dégagement
L'espace dimensionnel entre les pièces assemblées selon le modèle indiqué
C · Conception en contexte
  • Design supporting separation and replacement of parts.
  • Compare a common service over a stated lifetime. Separate fixed tooling cost from cost per item. Include repair, energy, transport and realistic end-of-life pathways rather than using a recycled label as the whole judgement.
  • Create a bill of materials and an annotated assembly plan. Test whether a worn part can be replaced with normal tools. For HL project development, evaluate production feasibility and commercial assumptions against the applicable cohort guide.
conception pour le démontage
Conception favorisant la séparation et le remplacement des pièces
tolérance
Une variation dimensionnelle autorisée
Project · Projet de conception
  • Designing the fit between people, tasks and products.
  • Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
  • Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
  • A developing version used to test a solution.
  • State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
  • Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
ergonomie
Conception de l'adéquation entre les personnes, les tâches et les produits
spécification
Exigences mesurables qu'une solution proposée doit satisfaire
prototype
Une version en développement utilisée pour tester une solution
itération
Révision guidée par des preuves et des tests répétés

Préparation à cette qualification

  • The official 2027 update confirms design in theory, design in practice and design in context.
  • Do not display old 2016 Topics 1–10 or its 40% design-project model as the current 2027 assessment.
  • The school project needs user evidence, measurable specification, concepts, supervised prototype/testing and evaluation; written diagnostics cannot replace it.
  • SL/HL objective and assessment differences remain unverified until current guide retrieval succeeds.

Couverture pédagogique encore nécessaire

  • Exact 2027 topic codes and SL/AHL scope await the full guide.
  • Exact 2027 modelling/material/production objectives await the full guide.
  • Exact 2027 social/environmental/commercial objectives and AHL distinctions await the guide.
  • Use a real school-supervised design problem; current rubric and SL/HL project demands await the guide.

Spécifications et documents d'échantillon

Matériel pédagogique

Préparation du cours

Les documents sont disponibles. Les notes spécifiques au conseil, les évaluations et la pratique interactive des anciens sujets ne sont pas encore disponibles pour tous les cours.

Leçons →

Se connecter ou créer un compte

IGCSE, A-Level & AP