Passer au contenu

Baccalauréat international · IB Diploma

Chemistry · HL

Dossiers, échantillons et documents de programme pour ce cours.

← Examens

Fiches, feuilles d'exercices et diapositives

Les documents de sujet partagés conservent leurs titres de cours et de sujet d'origine. Utilisez la spécification de votre tableau choisi pour la couverture, le niveau et les exigences d'examen.

Supports de cours · Baccalauréat international · IB Diploma · Chemistry · HL (23)
Fiches d'exercices · Baccalauréat international · IB Diploma · Chemistry · HL (23)
Diaporamas de présentation · Baccalauréat international · IB Diploma · Chemistry · HL (23)
Diaporamas de walkthrough d'exercices · Baccalauréat international · IB Diploma · Chemistry · HL (12)
Guides d'enseignement · Baccalauréat international · IB Diploma · Chemistry · HL (1)
Supports de cours · Chimie A-Level (37)
Fiches d'exercices · Chimie A-Level (90)
Diaporamas de présentation · Chimie A-Level (37)
Diaporamas de walkthrough d'exercices · Chimie A-Level (165)

Unités de cours et objectifs d'apprentissage

Ces leçons abordent des objectifs de cours sélectionnés. Vérifiez les lacunes restantes en couverture ; ce matériel ne constitue pas un programme d'entraînement complet.

Structure 1.1 · Introduction à la nature particulaire de la matière
  • Temperature on the kelvin scale.
  • At fixed amount and volume, pressure is proportional to kelvin temperature. At fixed temperature and amount, pressure is inversely proportional to volume. State which quantities are fixed before choosing a relationship.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
température absolue
Température sur l'échelle de Kelvin
gaz parfait
Un modèle de gaz avec des hypothèses simplificatrices spécifiées
Structure 1.2 · L'atome nucléaire
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
liaison ionique
Attraction entre ions chargés de manière opposée
électron délocalisé
Un électron non confiné à un seul atome ou lien
Structure 1.3 · Configurations électroniques
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
liaison ionique
Attraction entre ions chargés de manière opposée
électron délocalisé
Un électron non confiné à un seul atome ou lien
Structure 1.4 · Comptage des particules par masse : la mole
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
molaire
L'unité SI de la quantité de matière
réactif limitant
Le réactif limitant qui détermine la quantité maximale de produit possible
Structure 1.5 · Gaz parfaits
  • Temperature on the kelvin scale.
  • At fixed amount and volume, pressure is proportional to kelvin temperature. At fixed temperature and amount, pressure is inversely proportional to volume. State which quantities are fixed before choosing a relationship.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
température absolue
Température sur l'échelle de Kelvin
gaz parfait
Un modèle de gaz avec des hypothèses simplificatrices spécifiées
Structure 2.1 · Le modèle ionique
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
liaison ionique
Attraction entre ions chargés de manière opposée
électron délocalisé
Un électron non confiné à un seul atome ou lien
Structure 2.2 · Le modèle covalent
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
liaison ionique
Attraction entre ions chargés de manière opposée
électron délocalisé
Un électron non confiné à un seul atome ou lien
Structure 2.3 · Le modèle métallique
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
liaison ionique
Attraction entre ions chargés de manière opposée
électron délocalisé
Un électron non confiné à un seul atome ou lien
Structure 2.4 · Des modèles aux matériaux
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
liaison ionique
Attraction entre ions chargés de manière opposée
électron délocalisé
Un électron non confiné à un seul atome ou lien
Structure 3.1 · Le tableau périodique : classification des éléments
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
liaison ionique
Attraction entre ions chargés de manière opposée
électron délocalisé
Un électron non confiné à un seul atome ou lien
Structure 3.2 · Groupes fonctionnels : classification des composés organiques
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
groupe fonctionnel
Un groupe atomique déterminant les réactions caractéristiques
isomère
Un composé partageant une formule mais différant par sa structure
Reactivity 1.1 · Mesure de la variation d'enthalpie
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
exothermique
Transfert d'énergie vers l'environnement
variation d'enthalpie
Variation de chaleur à pression constante pour un processus donné
Reactivity 1.2 · Cycles énergétiques dans les réactions
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
exothermique
Transfert d'énergie vers l'environnement
variation d'enthalpie
Variation de chaleur à pression constante pour un processus donné
Reactivity 1.3 · Énergie à partir de carburants
  • Assessment across production, use and disposal.
  • Define the functional unit before comparing products. The same delivered service, such as carrying one litre of water a hundred times, is fairer than comparing one object with another regardless of lifetime.
  • List system boundaries, energy sources and assumptions. Compare water demand, emissions and waste separately before making a judgement. Explain whose priorities affect the decision and where the data are uncertain.
analyse du cycle de vie
Évaluation couvrant la production, l'utilisation et l'élimination
unité fonctionnelle
Le service commun utilisé pour une comparaison équitable
Reactivity 1.4 · Entropie et spontanéité
  • A state property related to energy dispersal and accessible arrangements.
  • Use ΔG = ΔH - TΔS with consistent energy units. A negative Gibbs energy change indicates thermodynamic favourability for the stated conditions, not a fast rate. An activation barrier can make a favourable process slow.
  • State whether values are standard-state quantities and record temperature in kelvin. Convert entropy from joules per kelvin per mole into kilojoules per kelvin per mole when enthalpy is in kilojoules per mole.
entropie
Une propriété d'état liée à la dispersion de l'énergie et aux arrangements accessibles
énergie de Gibbs
Une grandeur thermodynamique combinant les contributions d'enthalpie et d'entropie
Reactivity 2.1 · Combien ? La quantité de changement chimique
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
molaire
L'unité SI de la quantité de matière
réactif limitant
Le réactif limitant qui détermine la quantité maximale de produit possible
volume titre
Le volume versé entre deux lectures de burette
point d'équivalence
Le point d'achèvement de la réaction stœchiométrique
Reactivity 2.2 · À quelle vitesse ? Le taux de changement chimique
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
énergie d'activation
La barrière énergétique pour un mécanisme réactionnel
taux
Changement d'une grandeur mesurée par unité de temps
Reactivity 2.3 · Jusqu'où ? L'étendue du changement chimique
  • A state with equal forward and reverse reaction rates.
  • A concentration or pressure change disturbs the balance. The system responds toward a new equilibrium. Temperature changes can also change the equilibrium constant; a catalyst changes how quickly equilibrium is reached.
  • State the balanced equation and whether the forward reaction is exothermic before predicting a temperature effect. Count gas coefficients when considering pressure; pressure has no composition effect when gaseous amounts are equal on both sides.
équilibre
Un état où les vitesses des réactions directe et inverse sont égales
réaction réversible
Une réaction pouvant se produire dans les deux sens
Reactivity 3.1 · Réactions de transfert de protons
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
volume titre
Le volume versé entre deux lectures de burette
point d'équivalence
Le point d'achèvement de la réaction stœchiométrique
Reactivity 3.2 · Réactions de transfert d'électrons
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
oxydation
Perte d'électrons
réduction
Gain d'électrons
Reactivity 3.3 · Réactions de partage d'électrons
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
groupe fonctionnel
Un groupe atomique déterminant les réactions caractéristiques
isomère
Un composé partageant une formule mais différant par sa structure
Reactivity 3.4 · Réactions de partage de paires d'électrons
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
groupe fonctionnel
Un groupe atomique déterminant les réactions caractéristiques
isomère
Un composé partageant une formule mais différant par sa structure
Practical · Programme expérimental
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
une incertitude
Une limite quantifiée sur un résultat mesuré
erreur systématique
Un biais de mesure constant

Préparation à cette qualification

  • Structure and reactivity replace the old topic/option model. Entropy and spontaneity is AHL; all other topics still require exact SL/AHL statement separation from the guide.
  • Paper 1A MCQ + 1B experimental/data work, Paper 2 short/extended responses; SL 1.5/1.5 h, HL 2/2.5 h; weights 36%/44%. Scientific investigation 20%, 3,000 words.
  • Practical work 40 h plus collaborative sciences project 10 h and investigation 10 h; use the current chemistry data booklet.

Couverture pédagogique encore nécessaire

  • Full 2025 SL/AHL understanding and guidance statements are not established by the brief. Focus cases do not cover complete bonding, acid-base, mechanism or spectroscopy objectives.
  • Full experimental-technique objectives and current data booklet need acquisition.

Spécifications et documents d'échantillon

Matériel pédagogique

Préparation du cours

Les documents sont disponibles. Les notes spécifiques au conseil, les évaluations et la pratique interactive des anciens sujets ne sont pas encore disponibles pour tous les cours.

Leçons →

Se connecter ou créer un compte

IGCSE, A-Level & AP