AA: course teaching notes
Version: First assessment 2021
These are original teaching notes, and each lesson is labelled with its tier.
1 · Exact arithmetic and estimation
Can we pack without leftovers?
- A supplier packs 72 pencils and 90 pens into identical gift bags. How can we avoid leftovers?
- This lesson studies prime factor 质因数: A prime number that divides the integer exactly.
The method
- Prime factors reveal shared structure.
- Use the smallest common prime powers for the HCF and the largest for the LCM.
- Estimate before calculating; use brackets to preserve the order of operations.
A worked case
72=2^3×3^2 and 90=2×3^2×5. Their HCF is 2×9=18. Make 18 bags with 4 pencils and 5 pens each. Their LCM is 2^3×3^2×5=360.
Where it goes wrong
- The HCF divides both numbers; the LCM is a multiple of both.
- They answer different questions.
- A decimal estimate is not an exact fraction.
Not true: The HCF of two positive integers is larger than either integer. The HCF divides both numbers, so it can never be larger than the smaller one: the HCF of 72 and 90 is 18.
Applying it
- For a non-calculator paper, keep fractions exact and show cancellation.
- For a calculator paper, enter the full expression and compare with your estimate.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Prime factor: A prime number that divides the integer exactly.
- Prime factors reveal shared structure.
- Watch for: the HCF divides both numbers; the LCM is a multiple of both.
1 · Indices, surds and standard form
How small is a microscopic length?
- A microscope records a length of 0.000072 metres. A compact representation must keep its size correct.
- This lesson studies index 指数: The power to which a base is raised.
The method
- For the same positive base, multiplication adds indices and division subtracts them.
- A negative index means reciprocal; a fractional index represents a root.
- Standard form has 1≤a<10.
A worked case
0.000072=7.2×10^(-5). Also 16^(3/4)=(16^(1/4))^3=2^3=8. Simplify √72=6√2, then rationalise 1/√2=√2/2.
Where it goes wrong
- Index laws do not turn a sum into a single power: 2^3+2^4=24, not 2^7.
- Do not round a surd when an exact answer is requested.
Not true: For every positive a, a^2+a^3 equals a^5. Index laws only add powers when the terms are multiplied: 2²+2³=12, but 2⁵=32.
Applying it
- Check powers of ten against the original quantity.
- Use surds for exact geometry, and round only the final length when the question asks for a decimal.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Index: The power to which a base is raised.
- For the same positive base, multiplication adds indices and division subtracts them.
- Watch for: index laws do not turn a sum into a single power: 2^3+2^4=24, not 2^7.
1 · Sequences, series and recurrence
Does the change add or multiply?
- A saving plan adds ¥30 more each week; a population model grows by 5% each year. Equal differences and equal ratios need different models.
- This lesson studies common ratio 公比: The constant multiplier between consecutive terms of a geometric sequence.
The method
- For an arithmetic progression, u_n=a+(n-1)d and S_n=n(2a+(n-1)d)/2.
- For a geometric progression, u_n=ar^(n-1) and S_n=a(1-r^n)/(1-r).
- An infinite geometric sum exists only if |r|<1.
A worked case
For a=5,d=3,n=8, u_8=5+7×3=26 and S_8=8(10+21)/2=124. For a=12,r=1/2, S infinity=12/(1-1/2)=24. For u_(n+1)=2u_n+1 with u_1=1, the next terms are 3,7,15.
Where it goes wrong
- The first term has index 1, so the exponent is n-1.
- A sequence is a list; a series is a sum.
- A geometric sequence can alternate in sign and still converge.
Not true: Every geometric series has a finite sum to infinity. A sum to infinity exists only when −1<r<1; for r=2 the terms grow without limit.
Applying it
- Explain whether the context justifies additive or multiplicative change.
- In finance, distinguish a single deposit from a stream of deposits before choosing a sum formula.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Common ratio: The constant multiplier between consecutive terms of a geometric sequence.
- For an arithmetic progression, u_n=a+(n-1)d and S_n=n(2a+(n-1)d)/2.
- Watch for: the first term has index 1, so the exponent is n-1.
1 · Percentages, ratio and proportional reasoning
Can we recover the original price?
- A coat is reduced by 20% to ¥240. The discount applies to the original price, not to the sale price.
- This lesson studies multiplier 乘数: A factor that performs a percentage change in one multiplication.
The method
- A p% increase has multiplier 1+p/100; a decrease has multiplier 1-p/100.
- Reverse a percentage by dividing by the multiplier.
- In a ratio, first find the total number of parts.
A worked case
Let the original price be P. The model is sale price=0.8P. Hence P=240/0.8=300. A later 20% increase gives 240×1.2=288, so the two changes do not cancel.
Where it goes wrong
- A percentage uses a stated base.
- Subtracting the percentages loses that base.
- For compound change, multiply the multipliers; do not add the percentages.
Not true: A 20% decrease followed by a 20% increase restores the starting price. The 20% increase is taken of a smaller amount: 100×0.8×1.2=96, not 100.
Applying it
- For direct proportion use y=kx; for inverse proportion use y=k/x.
- Calculate k from a known pair before using a new value.
- State what you held constant.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Multiplier: A factor that performs a percentage change in one multiplication.
- A p% increase has multiplier 1+p/100; a decrease has multiplier 1-p/100.
- Watch for: A percentage uses a stated base.
2 · Domains, inverses and composition
Which inputs are allowed?
- A square-root model returns a real output only for some inputs. Its formula alone does not specify a complete function.
- This lesson studies domain 定义域: The set of allowed inputs to a function.
The method
- State the domain and range.
- For an inverse, first ensure the function is one-to-one on its domain.
- Composition fg means apply g first, then f; the intermediate output must be an allowed input to f.
A worked case
For f(x)=√(x-2), x≥2 and the range is y≥0. From y=√(x-2), x=y²+2. Thus f inverse(x)=x²+2 with x≥0. For g(x)=x+3, fg(1)=f(4)=√2.
Where it goes wrong
- Squaring can introduce extraneous solutions.
- Restricting a parabola's domain is essential before claiming an inverse.
- A horizontal translation inside f has the opposite sign to the graph's movement.
Not true: Every quadratic function on all real numbers has an inverse function. A quadratic on all real numbers is many-to-one (f(1)=f(−1) for x²), so its domain must be restricted first.
Applying it
- Check f(f inverse(x))=x on the inverse domain.
- Use a sketch to test whether a horizontal line meets the original graph more than once.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Domain: The set of allowed inputs to a function.
- State the domain and range.
- Watch for: squaring can introduce extraneous solutions.
2 · Exponentials, logarithms and modelling
Why does a decay model stay positive?
- A medicine concentration falls by the same percentage each hour. A constant subtraction would eventually predict a negative amount.
- This lesson studies half-life 半衰期: The time for a decaying quantity to fall to half its initial value.
The method
- For y=Ae^(kt), k is a proportional rate.
- Taking logs gives ln y=ln A+kt.
- Logarithms require positive arguments, and log(x+y) is not log x+log y.
A worked case
If y=80e^(-0.2t), y=40 gives e^(-0.2t)=1/2. Hence t=ln2/0.2≈3.466. For 3^x=20, x=ln20/ln3. Plotting ln y against t linearises this exponential model.
Where it goes wrong
- A fitted exponential is a model, not a guarantee.
- Specify the time units and range of use.
- A negative k describes decay; a negative starting amount usually contradicts the context.
Not true: For positive x and y, ln(x+y)=ln x+ln y. The log of a sum has no simple law; the product rule is ln(xy)=ln x+ln y.
Applying it
- Compare actual observations with the model.
- Systematic departures may indicate changing conditions.
- In a report, explain what the rate and initial value mean, rather than giving a bare equation.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Half-life: The time for a decaying quantity to fall to half its initial value.
- For y=Ae^(kt), k is a proportional rate.
- Watch for: A fitted exponential is a model, not a guarantee.
3 · Angle reasoning, similarity and mensuration
Does volume scale like length?
- A model has lengths one third of the real object. How much smaller are its area and volume?
- This lesson studies scale factor 相似比: The multiplier that relates corresponding lengths in similar shapes.
The method
- For similar shapes with length scale factor k, areas scale by k² and volumes by k³.
- State angle reasons explicitly.
- A circle's tangent is perpendicular to the radius at the contact point.
A worked case
If model-to-real length factor is 3, a model area of 12 cm² gives 12×3²=108 cm² and a model volume of 8 cm³ gives 8×3³=216 cm³. A cylinder with r=3,h=5 has volume πr²h=45π.
Where it goes wrong
- Equal angles alone establish similarity, not equal size.
- Use corresponding lengths in the same order.
- Convert linear units before calculating area or volume, or square/cube the conversion factor correctly.
Not true: Doubling every length of a solid doubles its volume. Volume scales by the cube of the length factor: doubling every length multiplies the volume by 8.
Applying it
- A geometric proof should name the relevant theorem, identify the equal angle or ratio, and draw the conclusion.
- A scale drawing is evidence only when the task permits measurement.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Scale factor: The multiplier that relates corresponding lengths in similar shapes.
- For similar shapes with length scale factor k, areas scale by k² and volumes by k³.
- Watch for: equal angles alone establish similarity, not equal size.
3 · Right triangles and non-right triangles
Which side does the ladder need?
- A ladder reaches a height of 4 m while its foot is 3 m from a wall. Which sides are known, and which angle do we need?
- This lesson studies hypotenuse 斜边: The side opposite the right angle in a right-angled triangle.
The method
- In a right triangle a²+b²=c²; sinθ=opposite/hypotenuse, cosθ=adjacent/hypotenuse and tanθ=opposite/adjacent.
- For other triangles, use the sine or cosine rule, or area=ab sin C/2.
A worked case
The ladder length is c=√(3²+4²)=5 m. Its angle to the ground satisfies tanθ=4/3, so θ≈53.1°. With two sides 6 and 8 enclosing 60°, c²=6²+8²-2×6×8 cos60°=52.
Where it goes wrong
- Label sides relative to the chosen angle.
- Pythagoras needs a right angle.
- A calculator angle mode error can produce a plausible but wrong result.
- Keep unrounded values for later steps.
Not true: Pythagoras applies to every triangle, including triangles without a right angle. Pythagoras needs a right angle; for other triangles use the cosine rule.
Applying it
- Use a plan or elevation for a three-dimensional problem before applying a triangle rule.
- Explain why the chosen triangle contains the required length or angle.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Hypotenuse: The side opposite the right angle in a right-angled triangle.
- In a right triangle a²+b²=c²; sinθ=opposite/hypotenuse, cosθ=adjacent/hypotenuse and tanθ=opposite/adjacent.
- Watch for: label sides relative to the chosen angle.
3 · Radians, identities and trigonometric equations
How far does the rim travel?
- A rotating wheel sweeps an arc. Radians let its angle connect directly to the distance travelled along the rim.
- This lesson studies radian 弧度: The angle subtended by an arc whose length equals the radius.
The method
- For θ in radians, arc length s=rθ and sector area A=r²θ/2.
- Use sin²θ+cos²θ=1 and angle identities to simplify or solve.
- List every solution in the stated interval.
A worked case
For r=4 and θ=π/3, s=4π/3 and A=8π/3. Solving sin x=1/2 on 0≤x<2π gives x=π/6 and 5π/6. For sin2x=1/2, solve first on 0≤2x<4π before dividing by 2.
Where it goes wrong
- A calculator's inverse sine gives one principal value.
- It does not give every solution.
- Dividing by sin x can discard solutions where sin x=0; check that case first.
Not true: The principal inverse sine value is the only solution in a full turn. Sine takes most values twice in a full turn: sin x=0.5 gives 30° and 150°.
Applying it
- Choose an identity that reduces the equation to one trigonometric function.
- Keep exact familiar angles where possible, and check each solution against the original equation.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Radian: The angle subtended by an arc whose length equals the radius.
- For θ in radians, arc length s=rθ and sector area A=r²θ/2.
- Watch for: A calculator's inverse sine gives one principal value.
4 · Data summaries, histograms and interpretation
Can one average tell the whole story?
- Two groups have the same median but different spread. One summary cannot describe both location and consistency.
- This lesson studies frequency density 频率密度: Frequency divided by class width, used as histogram height.
The method
- Compare an appropriate average and spread in context.
- A histogram uses area for frequency, so height=frequency/class width.
- Grouped estimates assume representative values within intervals.
A worked case
A class from 10 to 20 with frequency 30 has density 30/10=3. A class from 20 to 40 with frequency 20 has density 20/20=1. Its wider bar must not be mistaken for a larger density. For values 2,4,4,6,9, the median is 4 and mean is 5.
Where it goes wrong
- The tallest histogram bar need not contain the most observations.
- A grouped mean is an estimate.
- Correlation does not prove causation, and extrapolation extends beyond the observed range.
Not true: A histogram bar's height equals its frequency, even with unequal class widths. With unequal class widths the height is frequency density; frequency is the area of the bar.
Applying it
- Choose a display that fits the data type.
- Give both a numerical comparison and what it means for the population; do not infer more precision than the sample supports.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Frequency density: Frequency divided by class width, used as histogram height.
- Compare an appropriate average and spread in context.
- Watch for: the tallest histogram bar need not contain the most observations.
4 · Probability, trees and conditional reasoning
What changes after the first draw?
- A bag has 3 red and 2 blue counters. Taking two without replacement changes the chance of the second colour.
- This lesson studies conditional probability 条件概率: The probability of an event after restricting the sample space to a stated condition.
The method
- Multiply along a tree branch and add disjoint branches.
- With replacement, the composition stays fixed.
- Conditional probability is P(A given B)=P(A∩B)/P(B), for P(B)>0.
A worked case
Without replacement, P(two red)=3/5×2/4=3/10. P(one of each)=3/5×2/4+2/5×3/4=3/5. If P(A∩B)=0.12 and P(B)=0.3, P(A given B)=0.4.
Where it goes wrong
- Mutually exclusive means no overlap; independent means that knowing one event does not change the other's probability.
- Two disjoint events with positive probability are not independent.
Not true: Mutually exclusive events with positive probabilities must be independent. Mutually exclusive events with positive probabilities are dependent: if one happens, the other cannot, so P(A and B)=0≠P(A)P(B).
Applying it
- A two-way table makes the restricted denominator visible.
- Before using a product P(A)P(B), justify independence from the context or the supplied information.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Conditional probability: The probability of an event after restricting the sample space to a stated condition.
- Multiply along a tree branch and add disjoint branches.
- Watch for: mutually exclusive means no overlap; independent means that knowing one event does not change the other's probability.
4 · Binomial, normal and Poisson models
What makes a count predictable?
- A quality inspector counts defective items. The number is random, but a model can describe its likely range.
- This lesson studies expected value 期望值: The probability-weighted mean of a random variable.
The method
- A binomial model needs fixed n, independent trials, two outcomes and constant p.
- E(X)=np and Var(X)=np(1-p).
- For a normal model use z=(x-μ)/σ.
- A Poisson model describes counts with a constant rate and appropriate independence assumptions.
A worked case
For X binomial(5,0.2), P(X=0)=0.8^5=0.32768, E(X)=1 and Var(X)=0.8. For a normal quantity with μ=100,σ=15, the value 130 has z=2. A Poisson mean of 3 per hour gives mean 6 over two hours.
Where it goes wrong
- Not every count is binomial: changing p or dependence can invalidate it.
- For a continuous variable, the probability of one exact value is zero.
- Continuity correction matters when approximating a discrete distribution by a normal one.
Not true: Every count of successes has a binomial distribution regardless of dependence. The binomial model needs independent trials with a fixed probability; dependent trials break it.
Applying it
- Write the event as an inequality before using calculator distribution functions.
- Distinguish P(X<k), P(X≤k) and a tail complement.
- State assumptions in context.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Expected value: The probability-weighted mean of a random variable.
- A binomial model needs fixed n, independent trials, two outcomes and constant p.
- Watch for: not every count is binomial: changing p or dependence can invalidate it.
5 · Derivatives and stationary points
What is the slope at one point?
- A curved road has different slopes at different positions. An average gradient cannot describe every point.
- This lesson studies derivative 导数: The instantaneous rate of change, also the gradient of a tangent.
The method
- For y=ax^n, dy/dx=anx^(n-1).
- A stationary point satisfies dy/dx=0.
- Check the sign change of the derivative, or the second derivative when it is nonzero, to classify it.
A worked case
For y=x³-3x, dy/dx=3x²-3. At x=1, the gradient is 0 and y=-2. The second derivative is 6x, positive at x=1, so this is a local minimum. At x=-1, y=2 and the second derivative is negative, giving a local maximum.
Where it goes wrong
- A zero derivative does not always mean a maximum or minimum: y=x³ is stationary at 0 but continues increasing.
- An endpoint can also produce an extreme value on a restricted domain.
Not true: Every point with zero derivative is a local maximum or minimum. A zero derivative can also be a point of inflection: y=x³ at x=0 is neither a maximum nor a minimum.
Applying it
- At GCSE/IGCSE use only the polynomial scope allowed by the tier; do not add chain, product or quotient rules there.
- At advanced level, connect the derivative to rates and optimization with a valid domain.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Derivative: The instantaneous rate of change, also the gradient of a tangent.
- For y=ax^n, dy/dx=anx^(n-1).
- Watch for: A zero derivative does not always mean a maximum or minimum: y=x³ is stationary at 0 but continues increasing.
5 · Integrals, area and accumulation
How much change has accumulated?
- A velocity graph tells us motion at an instant. How can we recover the displacement accumulated over time?
- This lesson studies antiderivative 原函数: A function whose derivative equals the given integrand.
The method
- For n≠-1, the integral of ax^n is ax^(n+1)/(n+1)+C.
- A definite integral is signed accumulation.
- Split at sign changes when total area or distance is required.
A worked case
For v(t)=3t²-3 over 0≤t≤2, displacement=[t³-3t]_0^2=2. Since v changes sign at t=1, distance=-[t³-3t]_0^1+[t³-3t]_1^2=2+4=6. The constants cancel only for a definite integral.
Where it goes wrong
- The integral of 1/x is ln|x|+C, not the power rule with n=-1.
- Signed area can be zero even when the total enclosed area is positive.
Not true: A definite integral equals the total positive area, even when the graph crosses the axis. Area below the axis counts as negative, so a definite integral can be smaller than the total area, or even zero.
Applying it
- Identify what the integral means and include the correct units.
- A rate measured per second integrates to the underlying quantity, not to another rate.
- Differentiate an antiderivative to check it.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Antiderivative: A function whose derivative equals the given integrand.
- For n≠-1, the integral of ax^n is ax^(n+1)/(n+1)+C.
- Watch for: the integral of 1/x is ln|x|+C, not the power rule with n=-1.
IA · Planning a mathematical exploration
What makes an investigation mathematical?
- A student wants to predict queue waiting time at the school canteen. A useful exploration needs a question, data and mathematics the student can explain.
- This lesson studies assumption 假设: A condition adopted to make a mathematical model possible and whose effect should be evaluated.
The method
- Frame a focused question with measurable variables and a feasible method.
- Keep a dated record of decisions, sources and mathematical reasoning.
- Use technology to support analysis, and explain every important output in your own words.
A worked case
A pilot records mean waiting times of 3,5,7 minutes when 10,20,30 people are ahead. A first model is t=1+0.2n. At n=25 it predicts 6 minutes. An actual wait of 8 gives residual 2; investigate varying service rates rather than hiding the mismatch.
Where it goes wrong
- Do not copy a sample exploration, invent data or manufacture personal engagement.
- A prediction is not evidence until it is compared with observations.
- Consent and privacy matter when collecting school data.
Not true: The school-supervised mathematical exploration can be replaced by a timed written mock exam. The exploration is an extended piece of written work assessed on its own criteria; a timed exam tests something different.
Applying it
- The school supervises topic approval, checkpoints, authenticity and assessment.
- For the current 2021 course use the current school's guide and criteria; the 2029 inquiry criteria belong to a different assessment version.
In your course
- Analysis and Approaches SL, the course first assessed in 2021.
- Paper 1 is non-calculator: keep fractions, surds and π exact and show each step. On calculator papers, still write the expression before its value.
- Assumption: A condition adopted to make a mathematical model possible and whose effect should be evaluated.
- Frame a focused question with measurable variables and a feasible method.
- Watch for: do not copy a sample exploration, invent data or manufacture personal engagement.