Skip to content

← Pearson Edexcel · International GCSE · Mathematics A

Study notes

PDF ↓

Original teaching material. Check the course coverage gaps and your school’s current specification before using it for assessment.

4MA1: course teaching notes

Version: Issue 2, November 2017; first assessment June 2018; linear Mathematics A

These are original teaching notes, and each lesson is labelled with its tier.

1 · Exact arithmetic and estimation · Foundation

Can we pack without leftovers?

  • A supplier packs 72 pencils and 90 pens into identical gift bags. How can we avoid leftovers?
  • This lesson studies prime factor 质因数: A prime number that divides the integer exactly.

The method

  • Prime factors reveal shared structure.
  • Use the smallest common prime powers for the HCF and the largest for the LCM.
  • Estimate before calculating; use brackets to preserve the order of operations.

A worked case

$$72=2^3\times3^2,\quad90=2\times3^2\times5,\quad\mathrm{HCF}=18$$
Example

72=2^3×3^2 and 90=2×3^2×5. Their HCF is 2×9=18. Make 18 bags with 4 pencils and 5 pens each. Their LCM is 2^3×3^2×5=360.

Exact arithmetic and estimation — original teaching diagram

Where it goes wrong

  • The HCF divides both numbers; the LCM is a multiple of both.
  • They answer different questions.
  • A decimal estimate is not an exact fraction.
Watch out

Not true: The HCF of two positive integers is larger than either integer. The HCF divides both numbers, so it can never be larger than the smaller one: the HCF of 72 and 90 is 18.


Applying it

  • For a non-calculator paper, keep fractions exact and show cancellation.
  • For a calculator paper, enter the full expression and compare with your estimate.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 1.
Key idea
  • Prime factor: A prime number that divides the integer exactly.
  • Prime factors reveal shared structure.
  • Watch for: the HCF divides both numbers; the LCM is a multiple of both.

1 · Exact arithmetic and estimation · Higher

Can we pack without leftovers?

  • A supplier packs 72 pencils and 90 pens into identical gift bags. How can we avoid leftovers?
  • This lesson studies prime factor 质因数: A prime number that divides the integer exactly.

The method

  • Prime factors reveal shared structure.
  • Use the smallest common prime powers for the HCF and the largest for the LCM.
  • Estimate before calculating; use brackets to preserve the order of operations.

A worked case

$$a=\prod p_i^{\alpha_i},\quad b=\prod p_i^{\beta_i},\quad \operatorname{HCF}(a,b)=\prod p_i^{\min(\alpha_i,\beta_i)}$$
Example

72=2^3×3^2 and 90=2×3^2×5. Their HCF is 2×9=18. Make 18 bags with 4 pencils and 5 pens each. Their LCM is 2^3×3^2×5=360.

Exact arithmetic and estimation — original teaching diagram

Where it goes wrong

  • The HCF divides both numbers; the LCM is a multiple of both.
  • They answer different questions.
  • A decimal estimate is not an exact fraction.
Watch out

Not true: The HCF of two positive integers is larger than either integer. The HCF divides both numbers, so it can never be larger than the smaller one: the HCF of 72 and 90 is 18.


Applying it

  • For a non-calculator paper, keep fractions exact and show cancellation.
  • For a calculator paper, enter the full expression and compare with your estimate.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 1.
Key idea
  • Prime factor: A prime number that divides the integer exactly.
  • Prime factors reveal shared structure.
  • Watch for: the HCF divides both numbers; the LCM is a multiple of both.

1 · Integer indices and standard form · Foundation

How small is a microscopic length?

  • A microscope records a length of 0.000072 metres. A compact representation must keep its size correct.
  • This lesson studies index 指数: The power to which a base is raised.

The method

  • Use integer powers, square and cube roots and standard form with 1≤a<10.
  • In multiplying powers with the same base, add indices; in division, subtract them.

A worked case

$$a^m a^n=a^{m+n}$$
Example

0.000072=7.2×10^(-5). Also 2³×2⁴=2⁷=128. The square root of 81 is 9. Check a standard-form answer by writing it out as a decimal.

Integer indices and standard form — original teaching diagram

Where it goes wrong

  • Index laws do not turn a sum into a single power: 2^3+2^4=24, not 2^7.
  • Do not round a surd when an exact answer is requested.
Watch out

Not true: For every positive a, a^2+a^3 equals a^5. Index laws only add powers when the terms are multiplied: 2²+2³=12, but 2⁵=32.


Applying it

  • This Foundation/Core lesson excludes fractional powers and surd rationalisation.
  • Estimate a result before using a calculator and retain the required precision.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 1.
Key idea
  • Index: The power to which a base is raised.
  • Use integer powers, square and cube roots and standard form with 1≤a<10.
  • Watch for: index laws do not turn a sum into a single power: 2^3+2^4=24, not 2^7.

1 · Indices, surds and standard form · Higher

How small is a microscopic length?

  • A microscope records a length of 0.000072 metres. A compact representation must keep its size correct.
  • This lesson studies index 指数: The power to which a base is raised.

The method

  • For the same positive base, multiplication adds indices and division subtracts them.
  • A negative index means reciprocal; a fractional index represents a root.
  • Standard form has 1≤a<10.

A worked case

$$a^m a^n=a^{m+n},\quad a^{-n}=\frac1{a^n},\quad a^{m/n}=\left(\sqrt[n]{a}\right)^m$$
Example

0.000072=7.2×10^(-5). Also 16^(3/4)=(16^(1/4))^3=2^3=8. Simplify √72=6√2, then rationalise 1/√2=√2/2.

Indices, surds and standard form — original teaching diagram

Where it goes wrong

  • Index laws do not turn a sum into a single power: 2^3+2^4=24, not 2^7.
  • Do not round a surd when an exact answer is requested.
Watch out

Not true: For every positive a, a^2+a^3 equals a^5. Index laws only add powers when the terms are multiplied: 2²+2³=12, but 2⁵=32.


Applying it

  • Check powers of ten against the original quantity.
  • Use surds for exact geometry, and round only the final length when the question asks for a decimal.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 1.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Index: The power to which a base is raised.
  • For the same positive base, multiplication adds indices and division subtracts them.
  • Watch for: index laws do not turn a sum into a single power: 2^3+2^4=24, not 2^7.

1 · Percentages, ratio and proportional reasoning · Foundation

Can we recover the original price?

  • A coat is reduced by 20% to ¥240. The discount applies to the original price, not to the sale price.
  • This lesson studies multiplier 乘数: A factor that performs a percentage change in one multiplication.

The method

  • A p% increase has multiplier 1+p/100; a decrease has multiplier 1-p/100.
  • Reverse a percentage by dividing by the multiplier.
  • In a ratio, first find the total number of parts.

A worked case

$$P_{\mathrm{new}}=P_{\mathrm{old}}\left(1+\frac{r}{100}\right)$$
Example

Let the original price be P. The model is sale price=0.8P. Hence P=240/0.8=300. A later 20% increase gives 240×1.2=288, so the two changes do not cancel.

Percentages, ratio and proportional reasoning — original teaching diagram

Where it goes wrong

  • A percentage uses a stated base.
  • Subtracting the percentages loses that base.
  • For compound change, multiply the multipliers; do not add the percentages.
Watch out

Not true: A 20% decrease followed by a 20% increase restores the starting price. The 20% increase is taken of a smaller amount: 100×0.8×1.2=96, not 100.


Applying it

  • Use percentage multipliers and divide a total into ratio parts.
  • This Foundation/Core lesson uses linear proportional contexts, not the advanced regression methods.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 1.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Multiplier: A factor that performs a percentage change in one multiplication.
  • A p% increase has multiplier 1+p/100; a decrease has multiplier 1-p/100.
  • Watch for: A percentage uses a stated base.

1 · Percentages, ratio and proportional reasoning · Higher

Can we recover the original price?

  • A coat is reduced by 20% to ¥240. The discount applies to the original price, not to the sale price.
  • This lesson studies multiplier 乘数: A factor that performs a percentage change in one multiplication.

The method

  • A p% increase has multiplier 1+p/100; a decrease has multiplier 1-p/100.
  • Reverse a percentage by dividing by the multiplier.
  • In a ratio, first find the total number of parts.

A worked case

$$P_{\mathrm{new}}=P_{\mathrm{old}}\left(1+\frac{r}{100}\right)$$
Example

Let the original price be P. The model is sale price=0.8P. Hence P=240/0.8=300. A later 20% increase gives 240×1.2=288, so the two changes do not cancel.

Percentages, ratio and proportional reasoning — original teaching diagram

Where it goes wrong

  • A percentage uses a stated base.
  • Subtracting the percentages loses that base.
  • For compound change, multiply the multipliers; do not add the percentages.
Watch out

Not true: A 20% decrease followed by a 20% increase restores the starting price. The 20% increase is taken of a smaller amount: 100×0.8×1.2=96, not 100.


Applying it

  • For direct proportion use y=kx; for inverse proportion use y=k/x.
  • Calculate k from a known pair before using a new value.
  • State what you held constant.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 1.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Multiplier: A factor that performs a percentage change in one multiplication.
  • A p% increase has multiplier 1+p/100; a decrease has multiplier 1-p/100.
  • Watch for: A percentage uses a stated base.

1 · Accuracy, bounds and compound measures · Higher

Is the printed measurement exact?

  • A rectangular panel is labelled 8.0 cm by 5.0 cm, each to the nearest 0.1 cm. Its true area is not fixed at 40 cm².
  • This lesson studies lower bound 下界: The smallest possible value consistent with a stated rounding rule.

The method

  • A value rounded to the nearest unit u lies from stated value-u/2 up to, but usually not including, stated value+u/2.
  • For positive quantities, combine extremes according to the operation.

A worked case

$$A=LW,\qquad v=\frac{d}{t}$$
Example

The lengths satisfy 7.95≤L<8.05 and 4.95≤W<5.05. Since A=LW, 39.3525≤A<40.6525. For speed d/t, the largest speed uses the largest distance and smallest positive time.

Accuracy, bounds and compound measures — original teaching diagram

Where it goes wrong

  • An upper bound is not automatically achieved.
  • Dividing upper distance by upper time does not give the largest speed.
  • Keep enough digits in intermediate calculations.
Watch out

Not true: The greatest value of positive d/t uses the greatest d and greatest t. To make d/t as large as possible, use the greatest d and the least t; a larger t makes the quotient smaller.


Applying it

  • Distinguish measurement uncertainty from arithmetic rounding.
  • A sensible reported precision cannot be finer than the measurements justify.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 1.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Lower bound: The smallest possible value consistent with a stated rounding rule.
  • A value rounded to the nearest unit u lies from stated value-u/2 up to, but usually not including, stated value+u/2.
  • Watch for: an upper bound is not automatically achieved.

2 · Equations, identities and rearrangement · Foundation

When do two plans cost the same?

  • Two mobile plans cost 20+3x and 44+x yuan for x GB. When do they cost the same?
  • This lesson studies identity 恒等式: An equality that holds for every allowed value of its variable.

The method

  • An equation asks which inputs satisfy an equality; an identity holds for all allowed inputs.
  • Preserve equality by applying the same operation to both sides.
  • State restrictions before dividing by a variable.

A worked case

$$C_1=20+3x,\qquad C_2=44+x,\qquad C_1=C_2$$
Example

20+3x=44+x gives 2x=24 and x=12. Both plans then cost 56. In A=πr², divide by π and take the positive square root to obtain r=√(A/π), because r is a length.

Equations, identities and rearrangement — original teaching diagram

Where it goes wrong

  • Cancelling a term is not the same as cancelling a factor.
  • In (x²+2x)/x, factor the numerator and retain x≠0.
  • Check a rearrangement by substitution.
Watch out

Not true: Cancelling x from (x+3)/x leaves 3 for every nonzero x. x is a term of the numerator, not a factor, so it cannot be cancelled: at x=1, (1+3)/1=4, not 3.


Applying it

  • Define the unknown and set up a linear equation.
  • Check the answer by substitution.
  • Restrict this Foundation/Core lesson to simple expressions and equations.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 2.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Identity: An equality that holds for every allowed value of its variable.
  • An equation asks which inputs satisfy an equality; an identity holds for all allowed inputs.
  • Watch for: cancelling a term is not the same as cancelling a factor.

2 · Equations, identities and rearrangement · Higher

When do two plans cost the same?

  • Two mobile plans cost 20+3x and 44+x yuan for x GB. When do they cost the same?
  • This lesson studies identity 恒等式: An equality that holds for every allowed value of its variable.

The method

  • An equation asks which inputs satisfy an equality; an identity holds for all allowed inputs.
  • Preserve equality by applying the same operation to both sides.
  • State restrictions before dividing by a variable.

A worked case

$$C_1=20+3x,\qquad C_2=44+x,\qquad C_1=C_2$$
Example

20+3x=44+x gives 2x=24 and x=12. Both plans then cost 56. In A=πr², divide by π and take the positive square root to obtain r=√(A/π), because r is a length.

Equations, identities and rearrangement — original teaching diagram

Where it goes wrong

  • Cancelling a term is not the same as cancelling a factor.
  • In (x²+2x)/x, factor the numerator and retain x≠0.
  • Check a rearrangement by substitution.
Watch out

Not true: Cancelling x from (x+3)/x leaves 3 for every nonzero x. x is a term of the numerator, not a factor, so it cannot be cancelled: at x=1, (1+3)/1=4, not 3.


Applying it

  • Set up the equation from units and the meaning of the unknown.
  • A negative or fractional solution may be algebraically correct but impossible for a count.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 2.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Identity: An equality that holds for every allowed value of its variable.
  • An equation asks which inputs satisfy an equality; an identity holds for all allowed inputs.
  • Watch for: cancelling a term is not the same as cancelling a factor.

2 · Factorising and solving simple quadratics · Foundation

Which widths make enough space?

  • A rectangular enclosure has area x(10-x). What widths give at least 21 square metres?
  • This lesson studies discriminant 判别式: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.

The method

  • Expand brackets and factorise simple quadratics.
  • Solve by setting each factor equal to zero, and use a graph to interpret the roots.

A worked case

$$(x-3)(x-7)=0$$
Example

x²-10x+21=(x-3)(x-7). Hence the equation x²-10x+21=0 has roots 3 and 7. Check each root by substitution and mark both intercepts on the graph.

Factorising and solving simple quadratics — original teaching diagram

Where it goes wrong

  • Multiplying an inequality by a negative number reverses its direction.
  • A sketch must show which side of each root satisfies the inequality.
  • Geometry may restrict x further.
Watch out

Not true: A positive discriminant means that a quadratic has no real roots. A positive discriminant means two distinct real roots; a negative discriminant means no real roots.


Applying it

  • This Foundation/Core lesson uses factorisation and graphical roots; the discriminant, quadratic formula and quadratic inequalities are reserved for the advanced tier.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 2.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Discriminant: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.
  • Expand brackets and factorise simple quadratics.
  • Watch for: multiplying an inequality by a negative number reverses its direction.

2 · Quadratics and inequalities · Higher

Which widths make enough space?

  • A rectangular enclosure has area x(10-x). What widths give at least 21 square metres?
  • This lesson studies discriminant 判别式: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.

The method

  • Factor where possible; otherwise complete the square or use the quadratic formula.
  • A quadratic inequality needs the sign on intervals, not only the roots.
  • The discriminant identifies repeated or missing real roots.

A worked case

$$ax^2+bx+c=0,\qquad \Delta=b^2-4ac$$
Example

The condition is x(10-x)≥21, so x²-10x+21≤0. Factor (x-3)(x-7)≤0. The upward parabola is nonpositive between its roots, giving 3≤x≤7. The maximum area is 25 at x=5.

Quadratics and inequalities — original teaching diagram

Where it goes wrong

  • Multiplying an inequality by a negative number reverses its direction.
  • A sketch must show which side of each root satisfies the inequality.
  • Geometry may restrict x further.
Watch out

Not true: A positive discriminant means that a quadratic has no real roots. A positive discriminant means two distinct real roots; a negative discriminant means no real roots.


Applying it

  • Use the vertex to interpret an optimum.
  • Check an endpoint and a point between the roots; the algebra and graph should tell the same story.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 2.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Discriminant: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.
  • Factor where possible; otherwise complete the square or use the quadratic formula.
  • Watch for: multiplying an inequality by a negative number reverses its direction.

2 · Simultaneous equations and feasible regions · Foundation

Can one equation determine two counts?

  • Two ticket types raise a total amount. A single equation cannot identify both unknown counts.
  • This lesson studies elimination 消元法: Combining equations to remove one variable while retaining the same solutions.

The method

  • For two linear equations, use elimination or substitution and check both equations.
  • For a line and a quadratic, substitute the linear relation first; then solve the resulting quadratic.
  • For inequalities, shade the region satisfying every condition.

A worked case

$$x+y=12,\qquad 3x+2y=31$$
Example

If x+y=12 and 3x+2y=31, subtract twice the first equation from the second to obtain x=7, then y=5. For y=x+1 and y=x²-1, x²-x-2=0 gives x=2 or -1, with y=3 or 0.

Simultaneous equations and feasible regions — original teaching diagram

Where it goes wrong

  • One equation checked is not enough.
  • A line can meet a quadratic twice, so retain both solutions unless the context removes one.
  • Inequality boundaries may be included or excluded according to the sign.
Watch out

Not true: A pair of simultaneous equations is solved by checking just one of them. A solution must satisfy both equations; check it in each one.


Applying it

  • Define the variables and their units.
  • If they count objects, both must be nonnegative integers.
  • For a feasible region, test one point on the required side of each boundary and then take the intersection.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 2.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Elimination: Combining equations to remove one variable while retaining the same solutions.
  • For two linear equations, use elimination or substitution and check both equations.
  • Watch for: one equation checked is not enough.

2 · Simultaneous equations and feasible regions · Higher

Can one equation determine two counts?

  • Two ticket types raise a total amount. A single equation cannot identify both unknown counts.
  • This lesson studies elimination 消元法: Combining equations to remove one variable while retaining the same solutions.

The method

  • For two linear equations, use elimination or substitution and check both equations.
  • For a line and a quadratic, substitute the linear relation first; then solve the resulting quadratic.
  • For inequalities, shade the region satisfying every condition.

A worked case

$$x+y=12,\qquad 3x+2y=31$$
Example

If x+y=12 and 3x+2y=31, subtract twice the first equation from the second to obtain x=7, then y=5. For y=x+1 and y=x²-1, x²-x-2=0 gives x=2 or -1, with y=3 or 0.

Simultaneous equations and feasible regions — original teaching diagram

Where it goes wrong

  • One equation checked is not enough.
  • A line can meet a quadratic twice, so retain both solutions unless the context removes one.
  • Inequality boundaries may be included or excluded according to the sign.
Watch out

Not true: A pair of simultaneous equations is solved by checking just one of them. A solution must satisfy both equations; check it in each one.


Applying it

  • Define the variables and their units.
  • If they count objects, both must be nonnegative integers.
  • For a feasible region, test one point on the required side of each boundary and then take the intersection.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 2.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Elimination: Combining equations to remove one variable while retaining the same solutions.
  • For two linear equations, use elimination or substitution and check both equations.
  • Watch for: one equation checked is not enough.

3 · Arithmetic sequences and nth terms · Foundation

Does the change add or multiply?

  • A saving plan adds ¥30 more each week; a population model grows by 5% each year. Equal differences and equal ratios need different models.
  • This lesson studies common difference 公差: The constant added between consecutive terms of an arithmetic sequence.

The method

  • Find a constant difference for an arithmetic sequence.
  • Its nth term is a+(n-1)d.
  • A term-to-term rule describes how to reach the next term; a position-to-term rule gives a term directly.

A worked case

$$u_n=a+(n-1)d$$
Example

For 5,8,11,14,... the common difference is 3. The nth term is 5+3(n-1)=3n+2. At n=8, u₈=26. To find the position of 62, solve 3n+2=62, giving n=20.

Arithmetic sequences and nth terms — original teaching diagram

Where it goes wrong

  • The first term has index 1, so the exponent is n-1.
  • A sequence is a list; a series is a sum.
  • A geometric sequence can alternate in sign and still converge.
Watch out

Not true: The first term of a sequence has index zero. A sum to infinity exists only when −1<r<1; for r=2 the terms grow without limit.


Applying it

  • Generate several terms and check a proposed nth-term rule.
  • Infinite geometric series and advanced sum formulae are excluded from this Foundation/Core lesson.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 3.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Common difference: The constant added between consecutive terms of an arithmetic sequence.
  • Find a constant difference for an arithmetic sequence.
  • Watch for: the first term has index 1, so the exponent is n-1.

3 · Sequences, series and recurrence · Higher

Does the change add or multiply?

  • A saving plan adds ¥30 more each week; a population model grows by 5% each year. Equal differences and equal ratios need different models.
  • This lesson studies common ratio 公比: The constant multiplier between consecutive terms of a geometric sequence.

The method

  • For an arithmetic progression, u_n=a+(n-1)d and S_n=n(2a+(n-1)d)/2.
  • For a geometric progression, u_n=ar^(n-1) and S_n=a(1-r^n)/(1-r).
  • An infinite geometric sum exists only if |r|<1.

A worked case

$$u_n=a+(n-1)d,\qquad S_n=\frac{n}{2}\left[2a+(n-1)d\right]$$
Example

For a=5,d=3,n=8, u_8=5+7×3=26 and S_8=8(10+21)/2=124. For a=12,r=1/2, S infinity=12/(1-1/2)=24. For u_(n+1)=2u_n+1 with u_1=1, the next terms are 3,7,15.

Sequences, series and recurrence — original teaching diagram

Where it goes wrong

  • The first term has index 1, so the exponent is n-1.
  • A sequence is a list; a series is a sum.
  • A geometric sequence can alternate in sign and still converge.
Watch out

Not true: Every geometric series has a finite sum to infinity. A sum to infinity exists only when −1<r<1; for r=2 the terms grow without limit.


Applying it

  • Explain whether the context justifies additive or multiplicative change.
  • In finance, distinguish a single deposit from a stream of deposits before choosing a sum formula.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 3.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Common ratio: The constant multiplier between consecutive terms of a geometric sequence.
  • For an arithmetic progression, u_n=a+(n-1)d and S_n=n(2a+(n-1)d)/2.
  • Watch for: the first term has index 1, so the exponent is n-1.

3 · Straight lines and gradients · Foundation

How does a path's slope become an equation?

  • A path rises 6 metres over a horizontal distance of 3 metres. Its gradient connects a diagram to an equation.
  • This lesson studies gradient 斜率: The change in y divided by the corresponding change in x.

The method

  • Gradient is change in y divided by change in x.
  • A straight line has y=mx+c, where c is its y-intercept.
  • Parallel lines have equal gradients.

A worked case

$$y=mx+c$$
Example

Through (2,5) with gradient 3, substitute to get 5=3×2+c, so c=-1 and y=3x-1. Points (1,2) and (4,8) give gradient (8-2)/(4-1)=2.

Straight lines and gradients — original teaching diagram

Where it goes wrong

  • A vertical line has no finite gradient; do not force it into y=mx+c.
  • Read the signs of a circle's centre carefully.
  • The radius to a tangent is perpendicular to the tangent.
Watch out

Not true: Perpendicular nonvertical lines have equal gradients. Perpendicular gradients multiply to −1: a gradient of 2 needs −1/2. Parallel lines have equal gradients.


Applying it

  • Plot a straight line using two checked points and label its intercept.
  • Perpendicular-gradient formulae and circle equations are not part of this Foundation/Core lesson.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 3.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Gradient: The change in y divided by the corresponding change in x.
  • Gradient is change in y divided by change in x.
  • Watch for: A vertical line has no finite gradient; do not force it into y=mx+c.

3 · Coordinate geometry and tangents · Higher

How does a path's slope become an equation?

  • A path rises 6 metres over a horizontal distance of 3 metres. Its gradient connects a diagram to an equation.
  • This lesson studies gradient 斜率: The change in y divided by the corresponding change in x.

The method

  • A line through (x₁,y₁) with gradient m has y-y₁=m(x-x₁).
  • Parallel lines have equal gradients.
  • Finite perpendicular gradients multiply to -1.
  • A circle has (x-a)²+(y-b)²=r².

A worked case

$$y-y_1=m(x-x_1),\qquad (x-a)^2+(y-b)^2=r^2$$
Example

Through (2,5) with gradient 3, y-5=3(x-2), so y=3x-1. A perpendicular through the same point has y-5=-(x-2)/3. The circle (x-2)²+(y+1)²=25 has centre (2,-1) and radius 5.

Coordinate geometry and tangents — original teaching diagram

Where it goes wrong

  • A vertical line has no finite gradient; do not force it into y=mx+c.
  • Read the signs of a circle's centre carefully.
  • The radius to a tangent is perpendicular to the tangent.
Watch out

Not true: Perpendicular nonvertical lines have equal gradients. Perpendicular gradients multiply to −1: a gradient of 2 needs −1/2. Parallel lines have equal gradients.


Applying it

  • Before solving a line-circle intersection, predict whether there are zero, one or two intersections.
  • Substitution produces a quadratic whose discriminant checks the prediction.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 3.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Gradient: The change in y divided by the corresponding change in x.
  • A line through (x₁,y₁) with gradient m has y-y₁=m(x-x₁).
  • Watch for: A vertical line has no finite gradient; do not force it into y=mx+c.

3 · Domains, inverses and composition · Higher

Which inputs are allowed?

  • A square-root model returns a real output only for some inputs. Its formula alone does not specify a complete function.
  • This lesson studies domain 定义域: The set of allowed inputs to a function.

The method

  • State the domain and range.
  • For an inverse, first ensure the function is one-to-one on its domain.
  • Composition fg means apply g first, then f; the intermediate output must be an allowed input to f.

A worked case

$$f(g(x))=(f\circ g)(x),\qquad f^{-1}(f(x))=x$$
Example

For f(x)=√(x-2), x≥2 and the range is y≥0. From y=√(x-2), x=y²+2. Thus f inverse(x)=x²+2 with x≥0. For g(x)=x+3, fg(1)=f(4)=√2.

Domains, inverses and composition — original teaching diagram

Where it goes wrong

  • Squaring can introduce extraneous solutions.
  • Restricting a parabola's domain is essential before claiming an inverse.
  • A horizontal translation inside f has the opposite sign to the graph's movement.
Watch out

Not true: Every quadratic function on all real numbers has an inverse function. A quadratic on all real numbers is many-to-one (f(1)=f(−1) for x²), so its domain must be restricted first.


Applying it

  • Check f(f inverse(x))=x on the inverse domain.
  • Use a sketch to test whether a horizontal line meets the original graph more than once.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 3.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Domain: The set of allowed inputs to a function.
  • State the domain and range.
  • Watch for: squaring can introduce extraneous solutions.

3 · Derivatives and stationary points · Higher

What is the slope at one point?

  • A curved road has different slopes at different positions. An average gradient cannot describe every point.
  • This lesson studies derivative 导数: The instantaneous rate of change, also the gradient of a tangent.

The method

  • For a polynomial term ax^n with nonnegative integer n, the gradient term is anx^(n-1).
  • Add the differentiated terms.
  • A stationary point has zero gradient.

A worked case

$$\frac{d}{dx}(ax^n)=anx^{n-1},\qquad f^{\prime}(x)=0$$
Example

For y=x³-3x, dy/dx=3x²-3. At x=1, the gradient is 0 and y=-2. The second derivative is 6x, positive at x=1, so this is a local minimum. At x=-1, y=2 and the second derivative is negative, giving a local maximum.

Derivatives and stationary points — original teaching diagram

Where it goes wrong

  • A zero derivative does not always mean a maximum or minimum: y=x³ is stationary at 0 but continues increasing.
  • An endpoint can also produce an extreme value on a restricted domain.
Watch out

Not true: Every point with zero derivative is a local maximum or minimum. A zero derivative can also be a point of inflection: y=x³ at x=0 is neither a maximum nor a minimum.


Applying it

  • This advanced-tier IGCSE lesson is limited to polynomial differentiation, tangent gradients and stationary points.
  • Chain, product, quotient and implicit differentiation are excluded.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 3.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Derivative: The instantaneous rate of change, also the gradient of a tangent.
  • For a polynomial term ax^n with nonnegative integer n, the gradient term is anx^(n-1).
  • Watch for: A zero derivative does not always mean a maximum or minimum: y=x³ is stationary at 0 but continues increasing.

4 · Angles, lengths and area · Foundation

Does volume scale like length?

  • A model has lengths one third of the real object. How much smaller are its area and volume?
  • This lesson studies scale factor 相似比: The multiplier that relates corresponding lengths in similar shapes.

The method

  • Use angle facts with a stated reason.
  • Similar shapes have equal corresponding angles and proportional corresponding lengths.
  • Areas of rectangles and triangles come from their dimensions; compound shapes can be split into simpler parts.

A worked case

$$A_{\mathrm{rectangle}}=LW,\quad A_{\mathrm{triangle}}=\frac12 bh$$
Example

A rectangle of length 8 cm and width 5 cm has area A=LW=40 cm². A triangle on the same base and height has area A=bh/2=20 cm². For a pentagon, the interior-angle sum is (5-2)×180=540°.

Angles, lengths and area — original teaching diagram

Where it goes wrong

  • Equal angles alone establish similarity, not equal size.
  • Use corresponding lengths in the same order.
  • Convert linear units before calculating area or volume, or square/cube the conversion factor correctly.
Watch out

Not true: A triangle and rectangle with the same base and height have the same area. Volume scales by the cube of the length factor: doubling every length multiplies the volume by 8.


Applying it

  • Use a labelled sketch and appropriate units.
  • This Foundation/Core lesson does not test area/volume scale factors or advanced circle-theorem proofs.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 4.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Scale factor: The multiplier that relates corresponding lengths in similar shapes.
  • Use angle facts with a stated reason.
  • Watch for: equal angles alone establish similarity, not equal size.

4 · Angle reasoning, similarity and mensuration · Higher

Does volume scale like length?

  • A model has lengths one third of the real object. How much smaller are its area and volume?
  • This lesson studies scale factor 相似比: The multiplier that relates corresponding lengths in similar shapes.

The method

  • For similar shapes with length scale factor k, areas scale by k² and volumes by k³.
  • State angle reasons explicitly.
  • A circle's tangent is perpendicular to the radius at the contact point.

A worked case

$$\frac{A_2}{A_1}=k^2,\qquad \frac{V_2}{V_1}=k^3$$
Example

If model-to-real length factor is 3, a model area of 12 cm² gives 12×3²=108 cm² and a model volume of 8 cm³ gives 8×3³=216 cm³. A cylinder with r=3,h=5 has volume πr²h=45π.

Angle reasoning, similarity and mensuration — original teaching diagram

Where it goes wrong

  • Equal angles alone establish similarity, not equal size.
  • Use corresponding lengths in the same order.
  • Convert linear units before calculating area or volume, or square/cube the conversion factor correctly.
Watch out

Not true: Doubling every length of a solid doubles its volume. Volume scales by the cube of the length factor: doubling every length multiplies the volume by 8.


Applying it

  • A geometric proof should name the relevant theorem, identify the equal angle or ratio, and draw the conclusion.
  • A scale drawing is evidence only when the task permits measurement.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 4.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Scale factor: The multiplier that relates corresponding lengths in similar shapes.
  • For similar shapes with length scale factor k, areas scale by k² and volumes by k³.
  • Watch for: equal angles alone establish similarity, not equal size.

4 · Right triangles and non-right triangles · Foundation

Which side does the ladder need?

  • A ladder reaches a height of 4 m while its foot is 3 m from a wall. Which sides are known, and which angle do we need?
  • This lesson studies hypotenuse 斜边: The side opposite the right angle in a right-angled triangle.

The method

  • Use Pythagoras in a right triangle and use sine, cosine or tangent with the sides labelled relative to the chosen angle.

A worked case

$$a^2+b^2=c^2,\qquad \tan\theta=\frac{\mathrm{opposite}}{\mathrm{adjacent}}$$
Example

The ladder length is c=√(3²+4²)=5 m. Its angle to the ground satisfies tanθ=4/3, so θ≈53.1°. A right triangle with legs 6 and 8 has area 6×8/2=24.

Right triangles and non-right triangles — original teaching diagram

Where it goes wrong

  • Label sides relative to the chosen angle.
  • Pythagoras needs a right angle.
  • A calculator angle mode error can produce a plausible but wrong result.
  • Keep unrounded values for later steps.
Watch out

Not true: Pythagoras applies to every triangle, including triangles without a right angle. Pythagoras needs a right angle; for other triangles use the cosine rule.


Applying it

  • This Foundation/Core lesson uses right-angled triangles only.
  • Sine and cosine rules for non-right triangles belong to the advanced-tier lesson.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 4.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Hypotenuse: The side opposite the right angle in a right-angled triangle.
  • Use Pythagoras in a right triangle and use sine, cosine or tangent with the sides labelled relative to the chosen angle.
  • Watch for: label sides relative to the chosen angle.

4 · Right triangles and non-right triangles · Higher

Which side does the ladder need?

  • A ladder reaches a height of 4 m while its foot is 3 m from a wall. Which sides are known, and which angle do we need?
  • This lesson studies hypotenuse 斜边: The side opposite the right angle in a right-angled triangle.

The method

  • In a right triangle a²+b²=c²; sinθ=opposite/hypotenuse, cosθ=adjacent/hypotenuse and tanθ=opposite/adjacent.
  • For other triangles, use the sine or cosine rule, or area=ab sin C/2.

A worked case

$$a^2+b^2=c^2,\qquad \tan\theta=\frac{\mathrm{opposite}}{\mathrm{adjacent}}$$
Example

The ladder length is c=√(3²+4²)=5 m. Its angle to the ground satisfies tanθ=4/3, so θ≈53.1°. With two sides 6 and 8 enclosing 60°, c²=6²+8²-2×6×8 cos60°=52.

Right triangles and non-right triangles — original teaching diagram

Where it goes wrong

  • Label sides relative to the chosen angle.
  • Pythagoras needs a right angle.
  • A calculator angle mode error can produce a plausible but wrong result.
  • Keep unrounded values for later steps.
Watch out

Not true: Pythagoras applies to every triangle, including triangles without a right angle. Pythagoras needs a right angle; for other triangles use the cosine rule.


Applying it

  • Use a plan or elevation for a three-dimensional problem before applying a triangle rule.
  • Explain why the chosen triangle contains the required length or angle.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 4.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Hypotenuse: The side opposite the right angle in a right-angled triangle.
  • In a right triangle a²+b²=c²; sinθ=opposite/hypotenuse, cosθ=adjacent/hypotenuse and tanθ=opposite/adjacent.
  • Watch for: label sides relative to the chosen angle.

4 · Circle theorems and reasoned proofs · Higher

Which angles see the same chord?

  • Two observers see the same chord from the circle. Their angles are linked by a theorem rather than by the apparent size of the drawing.
  • This lesson studies cyclic quadrilateral 圆内接四边形: A quadrilateral whose four vertices lie on one circle.

The method

  • The angle at the centre is twice the angle at the circumference on the same arc.
  • Angles in the same segment are equal.
  • Opposite angles of a cyclic quadrilateral sum to 180°.
  • A radius is perpendicular to a tangent at contact.

A worked case

$$\theta_{\mathrm{centre}}=2\theta_{\mathrm{circumference}}$$
Example

If a central angle is 100°, the corresponding angle at the circumference is 50°. In a cyclic quadrilateral with one angle 112°, its opposite angle is 180-112=68°. A radius meeting a tangent gives 90°, even if the drawing looks oblique.

Circle theorems and reasoned proofs — original teaching diagram

Where it goes wrong

  • Identify the same chord and the correct arc before using a theorem.
  • Two visible right angles do not prove a quadrilateral cyclic without a valid converse argument.
  • A diagram need not be to scale.
Watch out

Not true: Every quadrilateral has opposite angles summing to 180°. Opposite angles sum to 180° only in a cyclic quadrilateral, one whose vertices lie on a circle.


Applying it

  • Write one reason alongside each angle calculation.
  • For the alternate-segment theorem, name the tangent and chord, then identify the angle in the opposite segment.
  • Use auxiliary radii only when they help the proof.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 4.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Cyclic quadrilateral: A quadrilateral whose four vertices lie on one circle.
  • The angle at the centre is twice the angle at the circumference on the same arc.
  • Watch for: identify the same chord and the correct arc before using a theorem.

4 · Constructions, loci and geometric conditions · Foundation

Where can both conditions hold?

  • A router must be equally far from two rooms and within reach of a power point. Each condition creates a different set of possible positions.
  • This lesson studies locus 轨迹: The set of all points satisfying a stated geometric condition.

The method

  • Points equally distant from A and B lie on the perpendicular bisector of AB.
  • Points at fixed distance r from C lie on a circle.
  • Points equally distant from two intersecting lines lie on their angle bisectors.

A worked case

$$x=3,\qquad x^2+y^2=25$$
Example

For A=(0,0) and B=(6,0), the perpendicular bisector is x=3. Points also 5 units from A satisfy x²+y²=25. Substituting x=3 gives y²=16, so (3,4) and (3,-4) satisfy both conditions.

Constructions, loci and geometric conditions — original teaching diagram

Where it goes wrong

  • The perpendicular bisector concerns distance to two points; the angle bisector concerns distance to two lines.
  • A sketch is not a ruler-and-compass construction: preserve arcs as evidence of the method.
Watch out

Not true: Points equally distant from two points lie on their angle bisector. Points equidistant from two points lie on the perpendicular bisector of the segment joining them; the angle bisector is equidistant from two lines.


Applying it

  • Translate each condition into a locus before finding intersections.
  • For a region closer to A than B, choose the correct side of the perpendicular bisector and show whether a boundary is allowed.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 4.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Locus: The set of all points satisfying a stated geometric condition.
  • Points equally distant from A and B lie on the perpendicular bisector of AB.
  • Watch for: the perpendicular bisector concerns distance to two points; the angle bisector concerns distance to two lines.

4 · Constructions, loci and geometric conditions · Higher

Where can both conditions hold?

  • A router must be equally far from two rooms and within reach of a power point. Each condition creates a different set of possible positions.
  • This lesson studies locus 轨迹: The set of all points satisfying a stated geometric condition.

The method

  • Points equally distant from A and B lie on the perpendicular bisector of AB.
  • Points at fixed distance r from C lie on a circle.
  • Points equally distant from two intersecting lines lie on their angle bisectors.

A worked case

$$x=3,\qquad x^2+y^2=25$$
Example

For A=(0,0) and B=(6,0), the perpendicular bisector is x=3. Points also 5 units from A satisfy x²+y²=25. Substituting x=3 gives y²=16, so (3,4) and (3,-4) satisfy both conditions.

Constructions, loci and geometric conditions — original teaching diagram

Where it goes wrong

  • The perpendicular bisector concerns distance to two points; the angle bisector concerns distance to two lines.
  • A sketch is not a ruler-and-compass construction: preserve arcs as evidence of the method.
Watch out

Not true: Points equally distant from two points lie on their angle bisector. Points equidistant from two points lie on the perpendicular bisector of the segment joining them; the angle bisector is equidistant from two lines.


Applying it

  • Translate each condition into a locus before finding intersections.
  • For a region closer to A than B, choose the correct side of the perpendicular bisector and show whether a boundary is allowed.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 4.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Locus: The set of all points satisfying a stated geometric condition.
  • Points equally distant from A and B lie on the perpendicular bisector of AB.
  • Watch for: the perpendicular bisector concerns distance to two points; the angle bisector concerns distance to two lines.

5 · Vectors and transformation geometry · Foundation

Why is displacement shorter than the walk?

  • Walking 4 m east and 3 m north gives a displacement of 5 m, even though the travelled distance is 7 m.
  • This lesson studies resultant 合向量: The vector sum representing the combined displacement or force.

The method

  • Add corresponding vector components and subtract position vectors to find a displacement.
  • A translation moves every point by the same vector; a scalar multiple changes length and possibly direction.

A worked case

$$\overrightarrow{AB}=\mathbf b-\mathbf a,\qquad |\mathbf v|=\sqrt{v_x^2+v_y^2}$$
Example

With a=(4,1) and b=(1,3), a+b=(5,4). From A=(1,2) to B=(5,5), displacement AB=(4,3). Its magnitude is √(4²+3²)=5.

Vectors and transformation geometry — original teaching diagram

Where it goes wrong

  • The order of subtraction matters: BA=-AB.
  • Proving parallelism needs a scalar-multiple relation; a sketch alone is insufficient.
  • Negative enlargement reverses position about its centre.
Watch out

Not true: AB and BA have the same components. BA goes the opposite way to AB, so BA=−AB: every component changes sign.


Applying it

  • Draw arrows with direction and identify the starting and ending points.
  • Scalar products, spatial line equations and advanced angle calculations are excluded from this Foundation/Core lesson.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 5.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Resultant: The vector sum representing the combined displacement or force.
  • Add corresponding vector components and subtract position vectors to find a displacement.
  • Watch for: the order of subtraction matters: BA=-AB.

5 · Vectors and transformation geometry · Higher

Why is displacement shorter than the walk?

  • Walking 4 m east and 3 m north gives a displacement of 5 m, even though the travelled distance is 7 m.
  • This lesson studies resultant 合向量: The vector sum representing the combined displacement or force.

The method

  • Add corresponding vector components and subtract position vectors to find a displacement.
  • A translation moves every point by the same vector; a scalar multiple changes length and possibly direction.

A worked case

$$\overrightarrow{AB}=\mathbf b-\mathbf a,\qquad |\mathbf v|=\sqrt{v_x^2+v_y^2}$$
Example

With a=(4,1) and b=(1,3), a+b=(5,4). From A=(1,2) to B=(5,5), displacement AB=(4,3). Its magnitude is √(4²+3²)=5.

Vectors and transformation geometry — original teaching diagram

Where it goes wrong

  • The order of subtraction matters: BA=-AB.
  • Proving parallelism needs a scalar-multiple relation; a sketch alone is insufficient.
  • Negative enlargement reverses position about its centre.
Watch out

Not true: AB and BA have the same components. BA goes the opposite way to AB, so BA=−AB: every component changes sign.


Applying it

  • Draw arrows with direction and identify the starting and ending points.
  • Scalar products, spatial line equations and advanced angle calculations are excluded from this Foundation/Core lesson.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 5.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Resultant: The vector sum representing the combined displacement or force.
  • Add corresponding vector components and subtract position vectors to find a displacement.
  • Watch for: the order of subtraction matters: BA=-AB.

5 · Reflections, rotations and enlargements · Foundation

Where is the enlargement centre?

  • A logo is enlarged around a point away from the origin. Multiplying its coordinates alone puts it in the wrong place.
  • This lesson studies centre of enlargement 位似中心: The point from which each point's displacement is multiplied by a scale factor.

The method

  • A translation adds a vector.
  • A reflection reverses signed perpendicular distance from a mirror line.
  • A rotation needs a centre, angle and direction.
  • For enlargement from C, use new P=C+k(P-C).

A worked case

$$\mathbf p_{\mathrm{image}}=\mathbf c+k(\mathbf p-\mathbf c)$$
Example

For C=(1,1),P=(3,2),k=2, P-C=(2,1), so new P=(1,1)+2(2,1)=(5,3). Reflection of (3,2) in the y-axis gives (-3,2). A 90° anticlockwise rotation about the origin gives (-2,3).

Reflections, rotations and enlargements — original teaching diagram

Where it goes wrong

  • A rotation needs its centre and direction, not just an angle.
  • A negative enlargement factor places the image on the opposite side of the centre.
  • A translation does not change orientation or size.
Watch out

Not true: Every enlargement is centred at the origin unless its scale factor is negative. An enlargement can have any centre; a negative scale factor puts the image on the other side of the centre.


Applying it

  • Describe a transformation completely before constructing the image.
  • Check corresponding distances and angles.
  • For combined transformations, apply them in the stated order; they usually do not commute.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 5.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Centre of enlargement: The point from which each point's displacement is multiplied by a scale factor.
  • A translation adds a vector.
  • Watch for: A rotation needs its centre and direction, not just an angle.

5 · Reflections, rotations and enlargements · Higher

Where is the enlargement centre?

  • A logo is enlarged around a point away from the origin. Multiplying its coordinates alone puts it in the wrong place.
  • This lesson studies centre of enlargement 位似中心: The point from which each point's displacement is multiplied by a scale factor.

The method

  • A translation adds a vector.
  • A reflection reverses signed perpendicular distance from a mirror line.
  • A rotation needs a centre, angle and direction.
  • For enlargement from C, use new P=C+k(P-C).

A worked case

$$\mathbf p_{\mathrm{image}}=\mathbf c+k(\mathbf p-\mathbf c)$$
Example

For C=(1,1),P=(3,2),k=2, P-C=(2,1), so new P=(1,1)+2(2,1)=(5,3). Reflection of (3,2) in the y-axis gives (-3,2). A 90° anticlockwise rotation about the origin gives (-2,3).

Reflections, rotations and enlargements — original teaching diagram

Where it goes wrong

  • A rotation needs its centre and direction, not just an angle.
  • A negative enlargement factor places the image on the opposite side of the centre.
  • A translation does not change orientation or size.
Watch out

Not true: Every enlargement is centred at the origin unless its scale factor is negative. An enlargement can have any centre; a negative scale factor puts the image on the other side of the centre.


Applying it

  • Describe a transformation completely before constructing the image.
  • Check corresponding distances and angles.
  • For combined transformations, apply them in the stated order; they usually do not commute.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 5.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Centre of enlargement: The point from which each point's displacement is multiplied by a scale factor.
  • A translation adds a vector.
  • Watch for: A rotation needs its centre and direction, not just an angle.

6 · Centre, spread and data displays · Foundation

Can one average tell the whole story?

  • Two groups have the same median but different spread. One summary cannot describe both location and consistency.
  • This lesson studies range 极差: The maximum observed value minus the minimum observed value.

The method

  • The mean is total divided by count.
  • The median is the central value after sorting.
  • The range is maximum minus minimum.
  • Use frequency tables, bar charts and suitable comparisons.

A worked case

$$\overline x=\frac{\sum x_i}{n}$$
Example

For 2,4,4,6,9, total=25 and count=5, so mean=5. The central value is 4, so median=4. The range is 9-2=7. Explain both a typical value and the spread.

Centre, spread and data displays — original teaching diagram

Where it goes wrong

  • The tallest histogram bar need not contain the most observations.
  • A grouped mean is an estimate.
  • Correlation does not prove causation, and extrapolation extends beyond the observed range.
Watch out

Not true: The mean of a list must be one of its observed values. With unequal class widths the height is frequency density; frequency is the area of the bar.


Applying it

  • A bar chart uses separate bars for categories.
  • Unequal-class-width histograms and formal density calculations are outside this Foundation/Core lesson.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 6.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Range: The maximum observed value minus the minimum observed value.
  • The mean is total divided by count.
  • Watch for: the tallest histogram bar need not contain the most observations.

6 · Data summaries, histograms and interpretation · Higher

Can one average tell the whole story?

  • Two groups have the same median but different spread. One summary cannot describe both location and consistency.
  • This lesson studies frequency density 频率密度: Frequency divided by class width, used as histogram height.

The method

  • Compare an appropriate average and spread in context.
  • A histogram uses area for frequency, so height=frequency/class width.
  • Grouped estimates assume representative values within intervals.

A worked case

$$\overline x=\frac{\sum x_i}{n},\qquad \mathrm{density}=\frac{\mathrm{frequency}}{\mathrm{class\ width}}$$
Example

A class from 10 to 20 with frequency 30 has density 30/10=3. A class from 20 to 40 with frequency 20 has density 20/20=1. Its wider bar must not be mistaken for a larger density. For values 2,4,4,6,9, the median is 4 and mean is 5.

Data summaries, histograms and interpretation — original teaching diagram

Where it goes wrong

  • The tallest histogram bar need not contain the most observations.
  • A grouped mean is an estimate.
  • Correlation does not prove causation, and extrapolation extends beyond the observed range.
Watch out

Not true: A histogram bar's height equals its frequency, even with unequal class widths. With unequal class widths the height is frequency density; frequency is the area of the bar.


Applying it

  • Choose a display that fits the data type.
  • Give both a numerical comparison and what it means for the population; do not infer more precision than the sample supports.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 6.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Frequency density: Frequency divided by class width, used as histogram height.
  • Compare an appropriate average and spread in context.
  • Watch for: the tallest histogram bar need not contain the most observations.

6 · Probability trees and outcomes · Foundation

What changes after the first draw?

  • A bag has 3 red and 2 blue counters. Taking two without replacement changes the chance of the second colour.
  • This lesson studies conditional probability 条件概率: The probability of an event after restricting the sample space to a stated condition.

The method

  • A probability lies between 0 and 1.
  • Exhaustive, mutually exclusive outcomes have probabilities summing to 1.
  • Multiply successive branch probabilities and add separate routes to an outcome.

A worked case

$$P(RR)=P(R_1)P(R_2\mid R_1)$$
Example

A bag contains 3 red and 2 blue counters. With replacement, P(two red)=3/5×3/5=9/25=0.36. Without replacement, the red-red branch is 3/5×2/4=0.3. Label each branch before multiplying.

Probability trees and outcomes — original teaching diagram

Where it goes wrong

  • Mutually exclusive means no overlap; independent means that knowing one event does not change the other's probability.
  • Two disjoint events with positive probability are not independent.
Watch out

Not true: Mutually exclusive events with positive probabilities must be independent. Mutually exclusive events with positive probabilities are dependent: if one happens, the other cannot, so P(A and B)=0≠P(A)P(B).


Applying it

  • Use a frequency table or a simple tree before calculating.
  • Formal conditional probability formulae are outside this Foundation/Core support lesson.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Foundation tier, specification section 6.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Conditional probability: The probability of an event after restricting the sample space to a stated condition.
  • A probability lies between 0 and 1.
  • Watch for: mutually exclusive means no overlap; independent means that knowing one event does not change the other's probability.

6 · Probability, trees and conditional reasoning · Higher

What changes after the first draw?

  • A bag has 3 red and 2 blue counters. Taking two without replacement changes the chance of the second colour.
  • This lesson studies conditional probability 条件概率: The probability of an event after restricting the sample space to a stated condition.

The method

  • Multiply along a tree branch and add disjoint branches.
  • With replacement, the composition stays fixed.
  • Conditional probability is P(A given B)=P(A∩B)/P(B), for P(B)>0.

A worked case

$$P(A\mid B)=\frac{P(A\cap B)}{P(B)},\qquad P(B)>0$$
Example

Without replacement, P(two red)=3/5×2/4=3/10. P(one of each)=3/5×2/4+2/5×3/4=3/5. If P(A∩B)=0.12 and P(B)=0.3, P(A given B)=0.4.

Probability, trees and conditional reasoning — original teaching diagram

Where it goes wrong

  • Mutually exclusive means no overlap; independent means that knowing one event does not change the other's probability.
  • Two disjoint events with positive probability are not independent.
Watch out

Not true: Mutually exclusive events with positive probabilities must be independent. Mutually exclusive events with positive probabilities are dependent: if one happens, the other cannot, so P(A and B)=0≠P(A)P(B).


Applying it

  • A two-way table makes the restricted denominator visible.
  • Before using a product P(A)P(B), justify independence from the context or the supplied information.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 6.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Conditional probability: The probability of an event after restricting the sample space to a stated condition.
  • Multiply along a tree branch and add disjoint branches.
  • Watch for: mutually exclusive means no overlap; independent means that knowing one event does not change the other's probability.

6 · Cumulative frequency and box plots · Higher

Which route is more consistent?

  • Two bus routes have similar typical times but different reliability. Quartiles show the middle half of the journeys.
  • This lesson studies interquartile range 四分位距: The difference between the upper and lower quartiles.

The method

  • A cumulative frequency counts observations below successive class boundaries.
  • Read quartiles at one quarter, one half and three quarters of the total frequency.
  • A box plot represents minimum, lower quartile, median, upper quartile and maximum.

A worked case

$$\mathrm{IQR}=Q_3-Q_1$$
Example

For 80 observations, read Q1 at cumulative frequency 20, median at 40 and Q3 at 60. If Q1=12,Q3=21, then IQR=9. Compare the medians for typical journey time and the IQRs for consistency.

Cumulative frequency and box plots — original teaching diagram

Where it goes wrong

  • Plot against class boundaries rather than midpoints.
  • Grouped quartiles are estimates.
  • The range is sensitive to extremes; the IQR describes only the middle half.
Watch out

Not true: The interquartile range equals the maximum minus the minimum. The interquartile range is Q3−Q1; maximum minus minimum is the range.


Applying it

  • Explain a comparison in the context of the measured quantity.
  • An outlier rule may use Q1-1.5IQR and Q3+1.5IQR; use the rule specified in the task rather than assuming every graph follows it.

In your course

  • Pearson Edexcel International GCSE Mathematics A (4MA1), Higher tier, specification section 6.
  • Every paper allows a calculator, but method marks still need the expression or equation written before its value.
Key idea
  • Interquartile range: The difference between the upper and lower quartiles.
  • A cumulative frequency counts observations below successive class boundaries.
  • Watch for: plot against class boundaries rather than midpoints.

Log in or create account

IGCSE, A-Level & AP