Gas models and absolute temperature
Introducido| English | Significado |
|---|---|
| pressure/ˈpreʃə/ | Force acting normally per unit area. |
| absolute zero/ˈæbsəluːt ˈzɪərəʊ/ | The lowest temperature on the thermodynamic temperature scale, equal to zero kelvin. |
| kelvin scale/ˈkelvɪn skeɪl/ | The absolute temperature scale starting at absolute zero; K = °C + 273.15. |
| ideal gas/aɪˈdɪəl ɡæs/ | gas ideal |
Boyle's J-tube, 1662
- In 1662 Robert Boyle trapped air in the short closed end of a J-shaped glass tube and poured mercury into the long end. Doubling the mercury's push halved the volume of air.
- His rule, pressure × volume = constant, was one of the first laws of physics written as an equation. The particle model explains why it works.
Pressure from particles
- Gas particles move fast in random directions. Each time one hits a wall it changes momentum, so it pushes on the wall. Millions of collisions per second make a steady pressure 压强, $p = \dfrac{F}{A}$.
- Heating the gas makes the particles move faster, so they hit the walls harder and more often: the pressure rises if the volume stays the same.
A sealed can of gas is heated. Why does the pressure rise?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Heating raises the particles' kinetic energy; the number and size of particles do not change.
Boyle's law
- For a fixed mass of gas at constant temperature, $pV = \text{constant}$, so $p_1V_1 = p_2V_2$. Squeezing the gas into half the volume doubles how often particles hit each part of the wall.
- In the figure every point gives the same product: $20 \times 300 = 40 \times 150 = 60 \times 100 = 6000$.
A gas at 100 kPa fills 30 cm³. At the same temperature it is compressed to 10 cm³. What is the new pressure?
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
$p_2 = \dfrac{100 \times 30}{10} = 300$ kPa.
Absolute zero and the kelvin scale
- If a gas is cooled at constant volume, its pressure falls in a straight line. Extending the line, the pressure would reach zero at −273 °C: absolute zero 绝对零度, where the particles have the least possible energy.
- The kelvin scale 开尔文温标 starts there: $T(\text{K}) = \theta(^\circ\text{C}) + 273$. At constant volume, $\dfrac{p}{T}$ is constant only when $T$ is in kelvin.
Compressing a gas at constant temperature
$p_1V_1=p_2V_2$
For a fixed amount of gas at constant temperature, halving volume doubles pressure.
Convert 27 °C to kelvin.
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
27 + 273 = 300 K.
Worked example: a syringe and a tyre
(a) Gas in a syringe at 150 kPa fills 40 cm³. It is pushed slowly to 25 cm³. Find the new pressure. (b) A tyre is at 200 kPa at 17 °C. After a long drive it is at 47 °C. Find the new pressure, if the volume stays the same.
- (a) Boyle's law: $p_2 = \dfrac{p_1V_1}{V_2} = \dfrac{150 \times 40}{25} = 240$ kPa.
- (b) Convert to kelvin: 17 °C = 290 K and 47 °C = 320 K.
- Pressure law: $p_2 = 200 \times \dfrac{320}{290} = 221$ kPa. Using °C would give $200 \times \dfrac{47}{17} = 553$ kPa — badly wrong.
A sealed flask holds gas at 120 kPa and 27 °C. It is heated to 127 °C. What is the new pressure?
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
300 K to 400 K, so $p_2 = 120 \times \dfrac{400}{300} = 160$ kPa.
The ideal gas equation
- All three laws combine into $pV = nRT$, where $n$ is the amount in moles and $R = 8.31\ \dfrac{\text{J}}{\text{mol K}}$. One mole at 273 K and 101 kPa fills about 22.4 litres.
- The mean kinetic energy of a particle is proportional to the kelvin temperature. Doubling $T$ in kelvin doubles the average kinetic energy.
How many moles of gas fill 0.024 m³ at 100 kPa and 300 K? ($R = 8.31$)
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
$n = \dfrac{pV}{RT} = \dfrac{100\,000 \times 0.024}{8.31 \times 300} = 0.96$ mol. Pressure must be in pascals.
Never use °C in the gas laws. Going from 10 °C to 20 °C does not double the pressure — it is 283 K to 293 K, a rise of only about 3.5 %. Only the kelvin scale starts at zero energy, so only kelvin can be used in ratios.
Heating a gas from 20 °C to 40 °C at constant volume doubles its pressure.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
In kelvin it is 293 K to 313 K, a rise of under 7 %.
Put the steps in order to find absolute zero with a flask of air.
Dificultad 3/5 · 200 monedas + un pequeño bono en el primer intento de hoy
The line meets zero pressure near −273 °C.
Gas pressure comes from particles hitting the walls. At constant temperature $pV$ is constant; at constant volume $\dfrac{p}{T}$ is constant with $T$ in kelvin. All of this is $pV = nRT$, and temperature in kelvin measures the particles' mean kinetic energy.
Explain, using particles, why pushing a bicycle pump's piston in slowly increases the pressure of the air inside.
Slowly means the temperature stays the same; only the collision rate changes.