Aluminium extraction: a molten mixture and a consumed carbon anode
Introducido| English | Significado |
|---|---|
| cryolite/ˈkraɪəlaɪt/ | criolita |
| anode/ˈænəʊd/ | ánodo |
Expensive metal, everyday cans
- In the 1850s aluminium cost more than gold; Napoleon III served his most honoured guests with aluminium cutlery.
- In 1886 Charles Hall and Paul Héroult independently found how to extract it cheaply by electrolysis. Today it is used for drink cans and aircraft.
The problem: a very high melting point
- Aluminium is more reactive than carbon, so it must be extracted by electrolysis of aluminium oxide.
- Pure aluminium oxide melts at about 2050 °C — far too much energy to keep it molten.
Why is aluminium extracted by electrolysis rather than with carbon?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Carbon cannot remove its oxygen.
Pure aluminium oxide is easy to melt.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
It melts at about 2050 °C.
The solution: cryolite
- The oxide is dissolved in molten cryolite 冰晶石. The mixture melts at about 950 °C.
- Lower temperature means less energy and lower cost.
Why is aluminium oxide dissolved in cryolite?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
About 950 °C instead of 2050 °C.
Worked example: the energy saving
Heating energy falls from 900 units for pure aluminium oxide to 600 units for the cryolite mixture.
- Saving $= 900 - 600 = 300$ units.
- Percentage saving $= \dfrac{300}{900} \times 100 = 33.3\%$.
- Use the starting value (900) as the base, not the new value.
Energy saved by dissolving the oxide
Heating energy falls from 900 units for pure aluminium oxide to 600 for the mixture: a saving of 300, or 300 ÷ 900 × 100 = 33.3%. The percentage uses the starting value as its base.
The energy needed falls from 1200 units to 800 units. What is the percentage saving? Give your answer to 1 decimal place.
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
$\dfrac{400}{1200} \times 100 = 33.3\%$.
The electrodes
- Cathode: aluminium ions gain electrons; molten aluminium collects at the bottom.
- Anode 阳极: oxide ions lose electrons to form oxygen. The anodes are carbon, and the oxygen reacts with them to make carbon dioxide.
What forms at each electrode?
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
Metal at the cathode.
The carbon anodes are used up and must be replaced regularly. This is not because carbon is "the reducing agent", as in a blast furnace. The oxygen made at the anode burns the hot carbon away to CO₂.
Why must the carbon anodes be replaced?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Hot carbon burns in oxygen.
Aluminium is extracted by electrolysis of aluminium oxide dissolved in molten cryolite, which lowers the operating temperature and saves energy. Aluminium forms at the cathode; oxygen forms at the carbon anodes and burns them away as carbon dioxide.
Explain why the extraction of aluminium is expensive, giving two reasons.
Energy and materials.