Approximating Areas with Riemann Sums
Introducido| English | Significado |
|---|---|
| Riemann sum/ˈriːmən sʌm/ | suma de Riemann |
| left/left/ | extremo izquierdo |
| right/raɪt/ | extremo derecho |
| midpoint/ˈmɪdpɔɪnt/ | punto medio |
| trapezoid/ˈtræpɪzɔɪd/ | trapecio |
| trapezoidal rule/ˈtræpɪzɔɪdl ruːl/ | regla del trapecio |
Estimate a curvy area with rectangles
- The area under a curve is rarely a neat rectangle — so approximate it with many thin rectangles.
- Slice the interval into strips, build a rectangle on each, and add up their areas.
- This sum of rectangle areas is a Riemann sum 黎曼和.
- More, thinner rectangles → a better estimate of the true area.
The area we approximate
y = x²
Rectangles or trapezoids fill the shaded area under the curve — more, thinner strips estimate it better.
Using more, thinner rectangles generally improves a Riemann-sum estimate.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Thinner strips hug the curve better.
Left, right, and midpoint rectangles
- Each rectangle's height comes from the function — but where in the strip do you measure it?
- Left 左端 sum: height from the left edge of each strip.
- Right 右端 sum: height from the right edge.
- Midpoint 中点 sum: height from the middle — usually the most accurate of the three.

Strips of width h approximate the area under a curve
A favor $f(x)=x^2$ on $[0,2]$ with $2$ right rectangles (width $1$): heights $f(1)=1$, $f(2)=4$. Find the right Riemann sum.
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
$1\cdot1+4\cdot1=5$.
Same setup, but a izquierda Riemann sum: heights $f(0)=0$, $f(1)=1$. Find it.
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
$0\cdot1+1\cdot1=1$.
Which are standard ways to pick a rectangle's height in a Riemann sum?
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
Left, right, and midpoint are the standard choices.
Trapezoids fit even better
- Instead of a flat-topped rectangle, connect the two edge heights with a slanted top: a trapezoid 梯形.
- The trapezoidal rule 梯形法则 averages the left and right heights on each strip.
- It hugs a smooth curve more closely than rectangles, so it's usually more accurate.
- Area of each trapezoid $=\tfrac12(\text{left height}+\text{right height})\times\text{width}$.
The ____ rule uses slanted tops (average of edge heights) for a closer fit than rectangles.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Each trapezoid averages the left and right heights.
Over- or underestimate?
- On an increasing function: left sums underestimate, right sums overestimate.
- On a decreasing function: it's the reverse — left over, right under.
- The trapezoidal rule's error depends on concavity (over on concave-up, under on concave-down).
- Knowing the direction of the error lets you bound the true area.
For an increasing function, a left Riemann sum gives an...
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Left heights are the smaller edge on an increasing curve → underestimate.
The three rectangle rules can give quite different answers for a small number of strips — they are approximations, not the exact area. And whether a left or right sum over- or under-estimates depends on whether the function is increasing or decreasing, not on the rule alone. Always check the function's behavior.
Estimate the area under $f(x)=x^2$ on $[0,2]$ with $2$ right rectangles (width $1$).
- Right heights: $f(1)=1$ and $f(2)=4$.
- Right sum $=1\cdot1+4\cdot1=5$.
- (The true area is $\tfrac83\approx2.67$; since $x^2$ is increasing, the right sum overestimates — as expected.)
All four rules on one function. For $f(x)=x^2$ on $[0,2]$ with 2 strips of width 1 (true area $\tfrac83\approx2.67$):
| Rule | Heights used | Estimate |
|---|---|---|
| left | $f(0)=0$, $f(1)=1$ | $1$ (under) |
| right | $f(1)=1$, $f(2)=4$ | $5$ (over) |
| midpoint | $f(0.5)=0.25$, $f(1.5)=2.25$ | $2.5$ (under) |
| trapezoidal | average of left and right | $3$ (over) |
- $x^2$ is concave up, so the trapezoids sit above the curve (over) and the midpoint rectangles fall below it (under).
Estimate the area under $f(x)=x^3$ on $[0,2]$ with 2 midpoint rectangles of width 1.
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
Midpoints 0.5 and 1.5: 0.125 + 3.375 = 3.5. (True area 4; x³ is concave up there, so the midpoint sum is under.)
Riemann sums from a table
- AP often gives only a table of values, and the strips may have different widths. Multiply each height by its own width.
- The units of the answer are (units of $f$) × (units of $x$). Litres per minute × minutes = litres.
Water into a tank. Water flows in at rate $r(t)$ litres per minute.
| $t$ (min) | 0 | 2 | 5 | 9 | 10 |
|---|---|---|---|---|---|
| $r(t)$ (L/min) | 4 | 6 | 7 | 5 | 3 |
- Widths: 2, 3, 4, 1. Left sum $=2(4)+3(6)+4(7)+1(5)=59$ L. Right sum $=2(6)+3(7)+4(5)+1(3)=56$ L.
- Trapezoidal sum $=2\cdot\tfrac{4+6}{2}+3\cdot\tfrac{6+7}{2}+4\cdot\tfrac{7+5}{2}+1\cdot\tfrac{5+3}{2}=57.5$ L. Each estimates $\int_0^{10}r(t)\,dt$, the total water that flowed in.
A car's velocity v(t) in m/s is 0 at t = 0, 8 at t = 4, 12 at t = 6 and 15 at t = 10 (t in seconds). Use a right Riemann sum with these three strips to estimate the distance travelled, in m.
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
Widths 4, 2, 4. Right sum = 4(8) + 2(12) + 4(15) = 32 + 24 + 60 = 116 m.
Same car data: v = 0, 8, 12, 15 m/s at t = 0, 4, 6, 10 s. Use the trapezoidal rule with these three strips to estimate the distance, in m.
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
4(0 + 8)/2 + 2(8 + 12)/2 + 4(12 + 15)/2 = 16 + 20 + 54 = 90 m.
r(t) is measured in gallons per hour and t in hours. What are the units of a Riemann sum for $\int_0^8 r(t)\,dt$?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
(gallons/hour) × hours = gallons.
A Riemann sum approximates area with rectangles: left, right, or midpoint heights. The trapezoidal rule uses slanted tops (averaging edge heights) for a closer fit. For an increasing function, left sums underestimate and right sums overestimate; more strips → a better approximation.