Skip to content

IGCSE Physics · November 2022 · Paper 42 · Difficulty 5 · Stretch

Question 9

9
(a)

Draw the symbol for:

(i)

a diode[1]

(ii)

a NOT gate.[1]

(b)
(i)

Fig. 9.1 shows a digital circuit.

Fig. 9.1

Complete the truth table shown in Table 9.1.

Table 9.1

I1I2ZO
00
01
10
11

[2]

(ii)

State another single gate which is equivalent to the part of the circuit between I1 and Z.[1]

(c)

Using two logic gates, design and draw a digital circuit with two inputs and two outputs which has the truth table shown in Table 9.2.

Use either the usual logic gate symbols or correctly labelled square boxes in your diagram.

Table 9.2

input 1input 2output 1output 2
0001
0111
1011
1110

[4]

[Total: 9]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

9(a)(i)

  • Draw a diode symbol: a triangle pointing towards a short vertical line, with a wire at each end.

9(a)(ii)

  • Draw a triangle with one input and a small circle at its output: this is a NOT gate.

9(b)(i)

  • For input pairs $00$, $01$, $10$, $11$ in that order, $Z$ is 1, 1, 0, 0.
  • For the same input pairs, $O$ is 0, 0, 1, 0.

9(b)(ii)

  • The equivalent gate is a NOT gate: $Z$ is 1 when $I_1$ is 0, and 0 when $I_1$ is 1.

9(c)

  • Connect both inputs to an OR gate and take its output as output 1.
  • Also connect both inputs to a NAND gate and take its output as output 2.
Original question

Log in or create account

IGCSE, A-Level & AP