Skip to content

IGCSE Physics · June 2025 · Paper 61 · Difficulty 3 · Standard

Question 3

3

A student investigates reflections in a plane mirror.

A ray-trace sheet is shown in Fig. 3.1.

(a)

• Draw a normal to the line MR that passes through the centre of MR. Label the normal NL.

  • Label the point at which NL crosses MR with the letter B.
  • Draw a line 10.0 cm long from B at an angle of incidence $i = 40^{\circ}$ to the normal below MR and to the left of the normal. Label the end of this line A.

[2]

(b)

The student places the reflecting face of the mirror vertically on the line MR.

He places two pins, $P_1$ and $P_2$, on line AB.

Mark the positions of $P_1$ and $P_2$ with crosses (X) on line AB at a suitable distance apart for this type of ray-trace experiment. Label the positions of $P_1$ and $P_2$.[1]

(c)

The student views the images of pins $P_1$ and $P_2$ from the direction indicated by the eye in Fig. 3.1. He places two pins, $P_3$ and $P_4$, so that pins $P_3$ and $P_4$ and the images of $P_2$ and $P_1$ all appear exactly one behind the other. The positions of $P_3$ and $P_4$ are shown on Fig. 3.1.

(i)

Draw a line through the positions of $P_3$ and $P_4$. Continue the line until it meets MR.[1]

(ii)

Measure the acute angle $\alpha$ between this line and the horizontal line MR. An acute angle is an angle less than $90^{\circ}$.

$\alpha = ....................................................... ^{\circ}$[1]

(d)

The student turns the mirror through $180^{\circ}$. He draws a new incident ray at an angle of incidence $i = 50^{\circ}$ to the normal above MR and to the left of the normal.

He labels the end of this line C. This line is not shown on Fig. 3.1. You may draw the line on Fig. 3.1.

He places two pins on the line CB and views the images of the two pins from near the top right-hand corner of the ray-trace sheet.

On Fig. 3.1, draw a reflected ray 10.0 cm long from B with an angle of reflection $\beta$ equal to the angle of incidence. Label the end of the line D.[2]

(e)

Suggest a relationship between $\alpha$ and $\beta$. Justify your answer by reference to the results.

relationship

justification

[2]

(f)

State two techniques that you use in this type of experiment to obtain an accurate ray trace.

1

2

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Draw $NL$ at right angles to $MR$ through its centre. Label the crossing point $B$.
  • Draw $BA$ $10.0\,\mathrm{cm}$ long, below $MR$ and left of the normal, at $40°$ to the normal.

3(b)

  • Mark and label $P_1$ and $P_2$ on $AB$, at least $5.0\,\mathrm{cm}$ apart.

3(c)(i)

  • Draw a straight line through $P_3$ and $P_4$ and extend it to meet $MR$ at $B$.

3(c)(ii)

  • Measure the acute angle between the reflected ray and $MR$: $\alpha = \mathbf{48}°$ approximately.

3(d)

  • Draw $BD$ above $MR$ and to the right of the normal, $10.0\,\mathrm{cm}$ long.
  • Make the angle between $BD$ and the normal $50°$, equal to the angle of incidence.

3(e)

  • $\alpha$ and $\beta$ are approximately equal.
  • $\alpha$ is about $48°$ and $\beta$ is $50°$; the small difference is within experimental uncertainty.

3(f)

  • Keep the pins vertical and view their bases when lining them up.
  • Place each pair of pins at least $5\,\mathrm{cm}$ apart to make the direction easier to judge.
Original question

Log in or create account

IGCSE, A-Level & AP