Skip to content

IGCSE Physics · June 2023 · Paper 61 · Difficulty 3 · Standard

Question 3

3

A student investigates the refraction of light using a semicircular transparent block.

Fig. 3.1 and Fig. 3.2 show his ray-trace sheet.

Fig. 3.1
(a)

• On Fig. 3.1, draw the normal NL through the centre of AB.

  • Continue the normal so that it passes through the curved side of the block.
  • Label the normal NL.
  • Label the point C where the normal NL crosses AB. [1]

(b)
(i)

Draw a line DC, below line PC, at an angle $i = 30^\circ$ to the normal and to the left of the normal.[1]

(ii)

• Mark with neat crosses (X) the positions for two pins on line DC at a suitable distance apart for this type of ray-trace experiment.

  • Label the positions P$_1$ and P$_2$. [1]

(c)

The student looks from the position of the eye shown in Fig. 3.1, to observe the images of P$_1$ and P$_2$ through side AB of the block.

He adjusts his line of sight until the images of P$_1$ and P$_2$ appear one behind the other.

He places two pins, P$_3$ and P$_4$, between his eye and the block so that P$_3$, P$_4$, and the images of P$_1$ and P$_2$ seen through the block, appear one behind the other.

The positions of P$_3$ and P$_4$ are shown on Fig. 3.1.

(i)

• Draw a line joining the positions of P$_3$ and P$_4$. Continue the line to AB.

  • Label E, the end of the line furthest from AB. [1]

(ii)

Measure the acute angle $\alpha$ between the line NL and the line CE. (An acute angle is less than $90^\circ$.)

$\alpha =$ $^{\circ}$[2]

(d)

State one precaution that you would take in order to produce an accurate ray trace.[1]

(e)

The student moves the transparent block to a new position on the ray-trace sheet, as shown in Fig. 3.2.

Fig. 3.2

He places pins P$_1$ and P$_2$ on line DC in the same positions used in (b)(ii).

He observes the images of P$_1$ and P$_2$ through the curved side of the block.

He places pins P$_5$ and P$_6$ between his eye and the block so that P$_5$, P$_6$, and the images of P$_1$ and P$_2$ seen through the block, appear one behind the other.

He draws a line CF through the positions of P$_5$ and P$_6$.

(i)

Measure the acute angle $\beta$ between the line AB and the line CF. (An acute angle is less than $90^\circ$.)

$\beta =$ $^{\circ}$[1]

(ii)

Calculate the angle $\theta$ between line CF and the normal to line AB. Show your working.

$\theta =$ $^{\circ}$[2]

(f)

A student suggests that angle $\alpha$ should be equal to angle $\theta$. State whether your results support the suggestion and justify your answer with reference to the results.

statement

justification [1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Find the midpoint of AB. Draw a line at $90°$ to AB through this point and extend it through the curved side.
  • Label the line NL and its crossing with AB as C.

3(b)(i)

  • From C, draw CD to the left of the normal and below PC, making an angle of $30°$ with the normal.

3(b)(ii)

  • Mark two crosses on CD at least $5.0\,\mathrm{cm}$ apart and label them P1 and P2.

3(c)(i)

  • Draw a straight line through P3 and P4 and extend it to AB. Label its end furthest from AB E.

3(c)(ii)

  • Check that the normal NL and the lines CD and CE meet at C. Draw each line neatly and thinly.
  • Measure between NL and CE with a protractor: $\alpha = \mathbf{49}^{\circ}$.

3(d)

  • Keep the pins vertical so their positions can be aligned accurately.

3(e)(i)

  • Measure the acute angle between AB and CF with a protractor: $\beta = \mathbf{71}^{\circ}$.

3(e)(ii)

  • The normal is at $90^{\circ}$ to AB, so $\theta = 90^{\circ} - \beta$.
  • $\theta = 90^{\circ} - 71^{\circ} = \mathbf{19}^{\circ}$.

3(f)

  • The results do not support the suggestion: $\alpha=49^{\circ}$ and $\theta=19^{\circ}$.
  • These angles differ by $30^{\circ}$, which is beyond the limits of experimental accuracy for measuring angles with a protractor.
Original question

Log in or create account

IGCSE, A-Level & AP