Skip to content

IGCSE Physics · June 2023 · Paper 41

Question 4

4

A student investigates the efficiency of a filament lamp. Fig. 4.1 shows the filament lamp with its glass bulb immersed in water in a beaker.

Fig. 4.1

The reading on the thermometer in the water is $19.0^{\circ}$ C.

Only the glass of the lamp is in contact with the water and the electrical connections are completely insulated.

The lamp is switched on.

At the end of the experiment, the temperature of the water is $21.5^{\circ}$ C.

(a)

The mass of the water in the beaker is 600g and the specific heat capacity of water is 4200 J/(kg °C).

(i)

Show that the increase in the internal energy of the water is 6300 J.[3]

(ii)

In the experiment, the lamp is switched on for 500s. The power supplied to the filament lamp is 13W. The useful energy from the lamp is transferred as light. The energy that increases the temperature of the water is wasted energy.

Determine the maximum possible efficiency of the filament lamp.

maximum possible efficiency =[4]

(b)

The efficiency of the lamp is less than the value determined in (a)(ii).

Suggest one reason for this.[1]

[Total: 8]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

4(a)(i)

  • Use $\Delta E = mc\Delta\theta$ and $\Delta\theta = \theta_f-\theta_i$.
  • $\Delta\theta = 21.5\,^{\circ}\mathrm{C}-19.0\,^{\circ}\mathrm{C} = 2.5\,^{\circ}\mathrm{C}$; $600\,\mathrm{g} = 0.600\,\mathrm{kg}$.
  • $\Delta E = (0.600\,\mathrm{kg})(4200\,\mathrm{J/(kg\,^{\circ}C)})(2.5\,^{\circ}\mathrm{C}) = \mathbf{6300}\,\mathrm{J}$.

4(a)(ii)

  • Use $E = Pt$ for the input energy: $E = (13\,\mathrm{W})(500\,\mathrm{s}) = 6500\,\mathrm{J}$.
  • At most, the useful light energy is $6500\,\mathrm{J}-6300\,\mathrm{J} = 200\,\mathrm{J}$.
  • Use $\text{efficiency} = E_{\text{useful}}/E_{\text{input}} \times 100\%$.
  • $\text{efficiency} = (200\,\mathrm{J})/(6500\,\mathrm{J}) \times 100\% = \mathbf{3.1}\%$.

4(b)

  • Some thermal energy is transferred from the water to the air, so the water temperature rise underestimates the wasted energy.
Original question

Log in or create account

IGCSE, A-Level & AP