Skip to content

IGCSE Physics · June 2022 · Paper 62 · Difficulty 4 · Challenging

Question 3

3

A student determines the focal length $f$ of a lens.

Fig. 3.1 shows the set-up.

(a)
(i)

On Fig. 3.1, measure the distance $x$ from the screen to the illuminated object.

$x$ =

Fig. 3.1 is drawn to scale. The actual distance $D$ between the illuminated object and the screen is 75.0 cm.

She places the lens between the object and the screen so that the lens is close to the illuminated object.

She moves the lens away from the object until a clearly focused image is formed on the screen.

On Fig. 3.1, measure the distance $y$ between the centre of the lens and the illuminated object.

$y$ =

On Fig. 3.1, measure the distance $z$ between the centre of the lens and the screen.

$z$ = [2]

Table 3.1

$D$/ cm$u$/ cm$v$/ cm$f$/ cm
75.0
85.019.164.114.4
(ii)

Calculate, and record in Table 3.1, the actual distance $u$ between the centre of the lens and the illuminated object.

Calculate, and record in Table 3.1, the actual distance $v$ between the centre of the lens and the screen.[1]

(iii)

Calculate, and record in Table 3.1, the focal length $f$ of the lens using the equation $f = \frac{uv}{D}$.[1]

(b)

The student places the screen at a distance $D$ = 85.0 cm from the illuminated object.

She repeats the procedure described in (a). The results are shown in Table 3.1.

Calculate the average value $f_A$ of the focal length of the lens. Show your working.

$f_A$ = cm[2]

(c)

State two precautions that you would take to obtain accurate readings in this experiment.

  1. [2]
(d)

A student states that a more accurate value for the focal length $f$ of the lens can be determined by plotting a graph of $uv$ against $D$. The gradient of the graph is numerically equal to the focal length.

(i)

Suggest a suitable number of sets of readings that the student should take[1]

(ii)

Explain briefly how this graphical method can give a more accurate value for the focal length.

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • Measure on the diagram to the nearest millimetre: $x=\mathbf{7.5}\,\mathrm{cm}$, $y=\mathbf{2.0}\,\mathrm{cm}$ and $z=\mathbf{5.5}\,\mathrm{cm}$.

3(a)(ii)

  • Use the scale factor $D/x$: $75.0\,\mathrm{cm}/7.5\,\mathrm{cm}=10$.
  • $u=10(2.0\,\mathrm{cm})=\mathbf{20}\,\mathrm{cm}$ and $v=10(5.5\,\mathrm{cm})=\mathbf{55}\,\mathrm{cm}$.

3(a)(iii)

  • Use $f=uv/D$.
  • $f=(20\,\mathrm{cm})(55\,\mathrm{cm})/(75.0\,\mathrm{cm})=\mathbf{14.7}\,\mathrm{cm}$.

3(b)

  • Use $f_A=(f_1+f_2)/2$. Keep the unrounded value of $f_1$ from (a)(iii) until the final step.
  • $f_A=(14.666\ldots\,\mathrm{cm}+14.4\,\mathrm{cm})/2=14.533\ldots\,\mathrm{cm}\approx\mathbf{14.5}\,\mathrm{cm}$.

3(c)

  • Use a darkened room so the image is easier to see.
  • Move the lens back and forth slowly to find the sharpest image.

3(d)(i)

  • Take five sets of readings so there are enough points for a graph.

3(d)(ii)

  • A best-fit straight line uses all the points, so it acts like an average.
  • An anomalous point can be spotted and the reading repeated or left out.
Original question

Log in or create account

IGCSE, A-Level & AP