Skip to content

IGCSE Physics · June 2022 · Paper 61 · Difficulty 4 · Challenging

Question 1

1

A student investigates the stretching of a spring.

The apparatus is shown in Fig. 1.1.

(a)
(i)

On Fig. 1.1, take two readings from the metre rule to determine the unstretched length $l_0$ of the coiled part of the spring.

reading 1 cm

reading 2 cm

$l_0$ = cm[3]

(ii)

Draw a diagram to show clearly how you would use a set square to obtain an accurate reading from the metre rule.[1]

(b)

The student suspends a load of $P = 1.0\text{ N}$ from the spring.

He records the new length $l_1$ of the coiled part of the spring.

$l_1 = 2.2$ cm

Calculate the extension $e_1$ using the equation $e_1 = (l_1 - l_0)$.

$e_1 =$ $\text{ cm}$

Calculate a value for the spring constant $k$ of the spring using the equation

$k = \frac{P}{e_1}$

Include the unit.

$k =$ [2]

(c)

The student suspends a load of $P = 5.0\text{ N}$ from the spring.

He records the new length $l_5$ of the coiled part of the spring.

$l_5 = 6.3$ cm

Calculate the extension $e_5$ using the equation $e_5 = (l_5 - l_0)$.

$e_5 =$ $\text{ cm}$

Calculate a second value for the spring constant $k$ of the spring using the equation

$k = \frac{P}{e_5}$

Give your answer to two significant figures.

$k =$ [2]

(d)

State whether your two values of the spring constant $k$ can be considered equal within the limits of experimental accuracy.

Explain your answer by referring to your results.

statement

explanation

[1]

(e)

A student improves the experiment by taking additional sets of readings.

(i)

Suggest the additional apparatus that the student uses.

[1]

(ii)

Suggest how the student uses the additional results.

[1]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • The readings at the ends of the coiled part are $r_1=21.3\,\mathrm{cm}$ and $r_2=22.8\,\mathrm{cm}$.
  • Use $l_0=r_2-r_1$. Then $l_0=22.8\,\mathrm{cm}-21.3\,\mathrm{cm}=\mathbf{1.5}\,\mathrm{cm}$.

1(a)(ii)

  • Draw the set square with one edge against the metre rule and a perpendicular edge level with the end of the spring. Read the scale at that level.

1(b)

  • Use $e_1 = l_1-l_0$ and $k = P/e_1$.
  • $e_1 = 2.2\,\mathrm{cm}-1.5\,\mathrm{cm} = \mathbf{0.7}\,\mathrm{cm}$.
  • $k = 1.0\,\mathrm{N}/0.7\,\mathrm{cm} = \mathbf{1.4}\,\mathrm{N/cm}$.

1(c)

  • Use $e_5 = l_5-l_0$ and $k = P/e_5$.
  • $e_5 = 6.3\,\mathrm{cm}-1.5\,\mathrm{cm} = \mathbf{4.8}\,\mathrm{cm}$.
  • $k = 5.0\,\mathrm{N}/4.8\,\mathrm{cm} = \mathbf{1.0}\,\mathrm{N/cm}$ to two significant figures.

1(d)

  • No. The values $1.4\,\mathrm{N/cm}$ and $1.0\,\mathrm{N/cm}$ differ by about 40\%, which is a large difference for this experiment.

1(e)(i)

  • Use additional loads to produce more extensions.

1(e)(ii)

  • Plot load against extension and use the gradient to find the spring constant.
Original question

Log in or create account

IGCSE, A-Level & AP