Skip to content

IGCSE Physics · March 2024 · Paper 62 · Difficulty 4 · Challenging

Question 3

3

A student determines the focal length of a converging lens by two methods.

(a)

The student sets up the apparatus as shown in Fig. 3.1.

Suggest one precaution that must be taken when setting up the apparatus to ensure accurate measurements.

[1]

(b)

The student sets the distance u between the illuminated object and the lens to 20.0 cm.

He places the screen near the lens and moves the screen until a sharp image of the illuminated object is seen on the screen.

(i)

Describe a technique for obtaining an image that is as sharp as possible.

[1]

(ii)

Measure v$_1$, the distance from the lens to the screen on Fig. 3.1.

v$_1$ = cm

Fig. 3.1 is drawn to 1/10th scale.

Calculate V$_1$, the actual distance from the lens to the screen.

V$_1$ = cm[2]

(c)

The shapes of the illuminated object and the image seen on the screen are shown full size in Fig. 3.2 and Fig. 3.3.

Fig. 3.2
(i)

Measure h$_o$, the height of the illuminated object, as shown in Fig. 3.2.

h$_o$ = cm

Measure h$_I$, the height of the image on the screen, as shown in Fig. 3.3.

h$_I$ = cm[1]

(ii)

Calculate a value M for the magnification, using the equation M = $\frac{h_I}{h_o}$.

M = [1]

(d)

Calculate a value f$_1$ for the focal length of the lens. Use your values from (b)(ii) and (c)(ii) and the equation f$_1$ = $\frac{V_1}{(M + 1)}$.

f$_1$ = [1]

(e)

Describe one difficulty that is experienced when using a ruler to measure the height of the image in this experiment. Suggest an improvement to the apparatus to overcome this.

difficulty

improvement

[2]

(f)

The student adjusts the position of the lens so that u = 40.0 cm and obtains a new value V$_2$ for the distance between the lens and the screen.

V$_2$ = 25.1 cm

Calculate a second value f$_2$ for the focal length of the lens, using the equation f$_2$ = $\frac{uV_2}{(u + V_2)}$.

f$_2$ = [1]

(g)

Suggest which value of focal length, f$_1$ or f$_2$, might be more accurate. Explain your answer.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Set the object and lens at the same height so the light passes through the centre of the lens.

3(b)(i)

  • Move the screen slowly back and forth around the sharpest position, then leave it where the image is clearest.

3(b)(ii)

  • The distance on the diagram is $v_1 = \mathbf{8.0}\,\mathrm{cm}$.
  • Use $V_1 = 10v_1$ for the one-tenth scale: $V_1 = 10(8.0\,\mathrm{cm}) = \mathbf{80}\,\mathrm{cm}$.

3(c)(i)

  • Measure the heights on the full-size figures: $h_O = \mathbf{1.2}\,\mathrm{cm}$ and $h_I = \mathbf{4.8}\,\mathrm{cm}$.

3(c)(ii)

  • Use $M = h_I/h_O$.
  • $M = \frac{4.8\,\mathrm{cm}}{1.2\,\mathrm{cm}} = \mathbf{4.0}$. Magnification has no unit.

3(d)

  • Use $f_1 = V_1/(M+1)$.
  • $f_1 = \frac{80\,\mathrm{cm}}{4.0+1} = \mathbf{16.0}\,\mathrm{cm}$.

3(e)

  • The ruler or your hand can block the light when measuring the image.
  • Use a translucent screen and measure from the back, where the ruler will not block the light.

3(f)

  • Use $f_2 = uV_2/(u+V_2)$.
  • $f_2 = \frac{(40.0\,\mathrm{cm})(25.1\,\mathrm{cm})}{40.0\,\mathrm{cm}+25.1\,\mathrm{cm}} = \mathbf{15.4}\,\mathrm{cm}$.

3(g)

  • Choose $\mathbf{f_2}$: $f_1$ uses the smaller height measurements, which have larger percentage uncertainties.
Original question

Log in or create account

IGCSE, A-Level & AP