Equilibrium and changing conditions
引入| English | 释义 | 拼音 |
|---|---|---|
| reversible reaction/rɪˈvɜːsɪbl rɪˈækʃn/ | 可逆反应 | kě nì fǎn yìng |
| equilibrium/ˌiːkwɪˈlɪbrɪəm/ | 平衡 | píng héng |
| compromise/ˈkɒmprəmaɪz/ | 折中 | zhé zhōng |
| approximation/əˌprɒksɪˈmeɪʃn/ | 近似 | jìn sì |
| Gibbs energy/ɡɪbz ˈenədʒi/ | 吉布斯能 | jí bù sī néng |
What would explain this observation?
- A reversible reaction 可逆反应 can continue in a closed vessel while measured concentrations stay constant. Constant composition does not mean particles have stopped reacting.
Build the model
- Dynamic equilibrium 平衡 occurs in a closed system when forward and reverse rates are equal.
- Reactant and product concentrations are constant, but they need not be equal.
- equilibrium: A state with equal forward and reverse reaction rates.
- reversible reaction: A reaction that can proceed in both directions.
What is equal at dynamic equilibrium?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
At dynamic equilibrium the forward and reverse reactions continue at equal RATES, so concentrations stay constant. The concentrations themselves are usually not equal to each other, and equal rates do not require equal masses.
Match each technical term to its precise meaning.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Use the definitions to distinguish related quantities and processes.
Choose evidence that can test it
- A concentration or pressure change disturbs the balance.
- The system responds toward a new equilibrium.
- Temperature changes can also change the equilibrium constant; a catalyst changes how quickly equilibrium is reached.
In the lab: State the balanced equation and whether the forward reaction is exothermic before predicting a temperature effect. Count gas coefficients when considering pressure; pressure has no composition effect when gaseous amounts are equal on both sides.
Which two habits make the investigation or model in this case more defensible?
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Stating the conditions and assumptions lets others repeat the work exactly, and recording the supporting evidence lets them check the conclusion. Hiding disagreeing results removes the evidence that could challenge a wrong conclusion, and one measurement can never establish a wider claim.
Work from known quantities
- Known: in A ⇌ B, equilibrium concentrations are [A] = 0.20 and [B] = 0.60 in the same concentration unit.
- For this stated expression, K = [B]/[A].
- K = 0.60/0.20 = 3.0.
- Equal rates do not imply K = 1.
Your turn: For A ⇌ B, calculate [B]/[A] when [B]=0.8 and [A]=0.2.
速率相等不代表含量相等
$A\rightleftharpoons B$
在这一封闭的 A ⇌ B 模型中,催化剂改变达到平衡的快慢,不改变最终组成。
For A ⇌ B, calculate [B]/[A] when [B]=0.8 and [A]=0.2.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
The result is 4 . Known: [B] = 0.8 and [A] = 0.2 in the same unit. For the stated expression K = [B]/[A]. K = 0.8/0.2 = 4. K has no unit here; a value above 1 means products are favoured at equilibrium.
Check the conclusion and its limits
- Do not use a catalyst to claim a larger equilibrium yield.
- For heterogeneous equilibria, pure solids are omitted from the usual equilibrium expression.
Not true: A catalyst changes the equilibrium constant at a fixed temperature. A catalyst speeds the forward and reverse reactions equally, so equilibrium is reached sooner but the equilibrium constant and final composition at a fixed temperature are unchanged.
- Dynamic equilibrium occurs in a closed system when forward and reverse rates are equal.
- A concentration or pressure change disturbs the balance.
- Watch for: do not use a catalyst to claim a larger equilibrium yield.
Write from the data: find the equilibrium constant
- For A in equilibrium with B, the concentration of B is 1.00 and the concentration of A is 0.40, in the same unit.
- Find K for the stated expression of B divided by A. A catalyst does not change K at a fixed temperature.
A catalyst speeds the forward and reverse reactions equally, so equilibrium is reached sooner but the equilibrium constant and final composition at a fixed temperature are unchanged.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
True. A catalyst speeds the forward and reverse reactions equally, so equilibrium is reached sooner but the equilibrium constant and final composition at a fixed temperature are unchanged.
A state with equal forward and reverse reaction rates: write the technical term.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
equilibrium means A state with equal forward and reverse reaction rates.
For A in equilibrium with B, the concentration of B is 1.00 and the concentration of A is 0.40, in the same unit. What is B divided by A, and what does a catalyst not change at a fixed temperature?
For this stated expression, K is the equilibrium concentration of B divided by the equilibrium concentration of A.
At equilibrium, [B] is 1.00 and [A] is 0.40 in the same concentration unit. For A ⇌ B, find K = [B]/[A].
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Use the equilibrium concentrations in this question: K = 1.00/0.40 = 2.5. The units cancel for this 1:1 expression. Adding the concentrations or copying a different example’s result does not give this ratio.
R2.3: Distinguish a closed system from an isolated one
- A closed system exchanges no matter with its surroundings. It can exchange heat, so it need not be isolated. At equilibrium under stable conditions, forward and reverse processes continue at equal nonzero rates. At fixed temperature and volume, concentrations remain constant.
- Rates are changes per time; concentrations are amounts per volume. Equal forward and reverse rates prevent net change but do not require equal reactant and product concentrations. A flat concentration trace alone also needs chemical evidence: a completed reaction or insensitive sensor can produce a flat trace.

What must be equal at dynamic equilibrium?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Equal rates cancel net change; they do not equate different species amounts.
R2.3: Match conserved inventories when comparing directions
- Use a supplied classroom model H₂ + I₂ ⇌ 2HI at 700 K with Kc 49. In the same volume, initially 1.00 mol/dm³ each of H₂ and I₂ contains the same elemental inventories as 2.00 mol/dm³ HI alone. Both approach [H₂] = [I₂] = 2/9 and [HI] = 14/9 mol/dm³.
- The curves are illustrative relaxation paths rather than measured kinetics. Their endpoints are the same because the conserved hydrogen and iodine inventories, temperature and volume match. Different starting inventories generally produce different equilibrium concentrations, even at the same equilibrium constant.

What else is needed besides the same temperature to predict identical final concentrations?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The equilibrium ratio and conservation conditions jointly fix the mixture.
R2.3: Recognize physical equilibrium between phases
- In a sealed flask containing liquid bromine and its vapour at fixed temperature, evaporation and condensation can occur at equal rates. The vapour colour remains constant while molecules continue moving between phases. This is a physical equilibrium rather than formation of a new chemical substance.
- For CO₂(g) ⇌ CO₂(aq), increasing the gas partial pressure at fixed temperature favours dissolution. Opening a carbonated bottle lowers the CO₂ partial pressure above the drink, so gas is lost overall. The original high-pressure equilibrium is disturbed; it is too broad to claim that an open liquid can never equilibrate with its environment.
What change favours more dissolved CO₂ at fixed temperature?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Dissolution responds to the gas species partial pressure.
R2.3: Construct the expression from the balanced equation
- For aA + bB ⇌ cC + dD in the homogeneous concentration model, Kc = [C]^c[D]^d/([A]^a[B]^b). Use equilibrium concentrations, products above reactants and coefficients as powers. Balance the equation before writing the expression.
- For N₂ + 3H₂ ⇌ 2NH₃, Kc = [NH₃]²/([N₂][H₂]³). The coefficient three raises hydrogen concentration to the third power; it does not mean multiply that concentration by three. Keep the stated concentration unit convention throughout a numerical calculation.
For N₂ + 3H₂ ⇌ 2NH₃, how does the coefficient 3 of H₂ enter the Kc denominator?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Stoichiometric coefficients become concentration exponents.
R2.3: Calculate with equilibrium concentrations
- For the supplied H₂ + I₂ ⇌ 2HI mixture, equilibrium [H₂] = [I₂] = 0.020 and [HI] = 0.14 mol/dm³. Kc = 0.14²/(0.020 × 0.020) = 0.0196/0.000400 = 49. Each concentration is at equilibrium, not an arbitrary initial value.
- A concentration quotient for an unequal-total-coefficient equation can retain concentration powers. The dimensionless thermodynamic constant instead uses activities relative to standard states. Use the convention supplied with a question rather than silently changing concentration units or treating every raw quotient as the same thermodynamic number.
For H₂ + I₂ ⇌ 2HI, equilibrium concentrations are [H₂] = [I₂] = 0.020 and [HI] = 0.14 mol/dm³. What is Kc?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Use the balanced coefficients as powers: Kc = [HI]²/([H₂][I₂]) = 0.14²/(0.020 × 0.020) = 0.0196/0.000400 = 49. The coefficient two requires squaring HI, not multiplying it by two.
For PCl₅(g) ⇌ PCl₃(g) + Cl₂(g), equilibrium concentrations are 0.040, 0.020 and 0.080 mol/dm³ respectively. Find Kc.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
The balanced equation gives Kc = [PCl₃][Cl₂]/[PCl₅]. Substitute the equilibrium values: (0.020 × 0.080)/0.040 = 0.00160/0.040 = 0.040. Each coefficient is one, so each concentration has power one. Keep the supplied concentration convention; this raw concentration quotient has units of mol/dm³, unlike a dimensionless activity-based constant.
R2.3: Reverse or rescale the same equation
- If Kc 49 belongs to H₂ + I₂ ⇌ 2HI, reversing the equation gives 1/49≈0.0204. Doubling all coefficients gives 49² = 2401. Halving them would give the positive square root. These are different expressions describing the same physical equilibrium.
- For one fixed equation and convention in the ideal/dilute model, the constant depends on temperature. Changing initial amounts, compression or a catalyst at that temperature does not change that constant. A changed equation does change the numerical constant being defined, even without changing the mixture.
What constant belongs to the reversed equation when the original has K49?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Reversing an equation swaps the numerator and denominator of its equilibrium expression. Hence Kreverse = 1/Kforward = 1/49 = 0.020408… at the same temperature; reversal does not negate K.
A forward equation has Kc = 49. Find the constant for its reversed equation.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Reversing the equation exchanges the numerator and denominator of the equilibrium expression. Therefore Kreverse = 1/Kforward = 1/49 = 0.020408163… . The reverse reaction is less product-favoured under the same conditions. This operation does not change the physical equilibrium mixture; it changes the direction used to describe it.
R2.3: Interpret very large and very small constants
- K much greater than one requires a large product-to-reactant activity ratio at equilibrium: products are strongly favoured. K greater than one gives the same direction of preference less strongly. K below one favours the reactant side, and K much less than one gives a very small product-to-reactant ratio.
- K says nothing directly about speed. A reaction can be strongly product-favoured but proceed very slowly because of its pathway and activation barrier. Exact equilibrium amounts and percentage conversion still need stoichiometry and the initial inventory; K alone is not a universal percentage yield.
Does a very large K prove a reaction is fast?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
An equilibrium constant does not specify the activation pathway.
R2.3: Explain K equal to one without equal concentrations
- For A ⇌ B, Kc 1 means [B]/[A] = 1 and hence equal concentrations. For A ⇌ 2B, Kc 1 instead means [B]²/[A] = 1 in the chosen convention. The numerator and denominator are equal; the individual concentrations need not be.
- For A ⇌ B at another temperature, mixtures with concentrations (A,B) = (0.20,0.60) and(0.40,1.20) mol/dm³ both give Kc 3.0. This does not contradict equal forward/reverse rates in each mixture. Rates, ratios and individual concentrations are three distinct ideas.
What does K1 guarantee in a general equilibrium expression?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The powers and number of species can differ between numerator and denominator.
For A ⇌ B, equilibrium concentrations are [A] = 0.40 and [B] = 1.20 mol/dm³. Find Kc.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
For this 1:1 equation, Kc = [B]/[A]. Insert equilibrium concentrations in the same units: 1.20/0.40 = 3.0. Equal forward and reverse rates do not require equal concentrations. This value applies to the stated equation and temperature; reversing the equation would invert it.
R2.3: Predict a concentration disturbance in stages
- Le Chatelier’s principle predicts a shift that partly counteracts a disturbance. Adding a reactant at fixed volume usually raises that reactant concentration immediately; reaction then consumes some of it while forming products. Removing a product favours further product formation.
- For invented N₂O₄ ⇌ 2NO₂ data at fixed volume, initially [N₂O₄] = 0.40 and [NO₂] = 0.20 mol/dm³, so Kc 0.10. Adding N₂O₄ to 0.70 immediately changes only that concentration. During subsequent reaction, every 0.01 decrease in N₂O₄ gives 0.02 increase in NO₂. The original K is restored at the same temperature, not every original concentration.

Does the equilibrium shift restore every original concentration?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The new conserved inventory differs after material is added.
R2.3: State how gas pressure changed
- Compressing an ideal gas mixture at fixed temperature increases all its concentrations and partial pressures. Equilibrium favours the side with fewer gaseous coefficients. For N₂ + 3H₂ ⇌ 2NH₃, four gas coefficients become two, so compression favours ammonia. Expansion favours the side with more gas.
- For H₂ + I₂ ⇌ 2HI, there are two gas coefficients on each side, so ideal compression does not change equilibrium mole fractions. Concentrations still rise immediately as volume falls. Count only gaseous species; solid amounts do not contribute gaseous coefficients. K stays unchanged when temperature does.
Which operation favours ammonia in the stated ideal-gas reaction?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Compression favours the side with fewer gaseous coefficients.
R2.3: Separate total pressure from reactant partial pressures
- Adding ideal inert gas at fixed volume and temperature raises total pressure but leaves reacting species amounts per volume unchanged. Their partial pressures do not change, so there is no equilibrium shift. This is different from compressing the mixture.
- If inert gas is added while total pressure is held fixed, the mixture expands. Reactant partial pressures fall, which can favour the side with more gas. The condition fixed volume versus fixed total pressure must be stated before predicting a shift.
Does added ideal inert gas at fixed volume shift a gas equilibrium simply by raising total pressure?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Follow the reacting species, not total pressure alone.
R2.3: Retain only phases that can vary in the expression
- For CaCO₃(s) ⇌ CaO(s) + CO₂(g), pure solid activities remain constant while both solid phases remain. The solids are omitted from the usual equilibrium expression. Adding more bulk CaCO₃ at the same temperature and volume then leaves the equilibrium CO₂ level unchanged.
- More exposed surface can change approach rate, not that equilibrium gas condition. If a solid is exhausted, the two-solid equilibrium constraint no longer applies. Pure liquid phases are similarly omitted, but components of one homogeneous liquid mixture are not automatically pure phases. Dissolved substances cannot simply be omitted.
When is the unchanged equilibrium CO₂ argument valid for extra CaCO₃?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
An equilibrium expression omitting a pure phase assumes that phase remains present.
R2.3: Use reaction enthalpy to predict heating
- Heating favours the endothermic direction; cooling favours the exothermic direction. For N₂O₄(g) ⇌ 2NO₂(g), the forward reaction is endothermic. Warming a rigid gas cell within its gas-phase range favours brown NO₂ and increases K. Fixed volume and optical path make the colour comparison interpretable.
- For an exothermic forward reaction such as ammonia formation, raising temperature lowers the equilibrium constant and favours reactants. Both forward and reverse rates can increase on heating; the final equilibrium ratio depends on thermodynamics, not a claim that one reaction literally stops.
How does heating change K for an endothermic forward reaction?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Heating favours the direction that absorbs heat.
R2.3: Keep a catalyst separate from equilibrium yield
- A catalyst provides an alternative pathway and accelerates approach consistently with the same equilibrium at fixed temperature. It does not change the equilibrium constant or equilibrium composition. Forward and reverse reactions both remain possible; the final energy and composition constraints are unchanged.
- Avoid assuming the same simple multiplication factor describes every multistep catalytic mechanism. For this unit the useful conclusion is that equilibrium is reached sooner, not that the equilibrium product fraction rises. An industrial isolated yield can also depend on side reactions and separation, so specify equilibrium yield.
What does a catalyst change in the equilibrium model at fixed temperature?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Changing the pathway does not change equilibrium thermodynamics.
R2.3: Explain an industrial compromise 折中 without inventing plant data
- The Haber equation is N₂(g) + 3H₂(g) ⇌ 2NH₃(g), with an exothermic forward reaction. Lower temperature favours ammonia but can give an impractically slow rate. Higher pressure favours ammonia but requires more demanding equipment and compression energy.
- A classroom example uses about 450°C and 200 atm with an iron catalyst; actual plants vary. The figure contains invented illustrative curves, not measured equilibrium yields. Ammonia can be condensed after cooling; unreacted nitrogen and hydrogen are recycled. The continuous process includes separation and is not one permanently sealed equilibrium vessel.

Why can a higher operating temperature be useful despite its lower equilibrium ammonia fraction?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
A process balances kinetics, equilibrium, equipment and separation.
AHL R2.3: Use Q before predicting direction
- Q has the same form as the chosen equilibrium expression but uses the mixture concentrations at the moment considered. For H₂ + I₂ ⇌ 2HI with supplied Kc 49, [H₂] = [I₂] = 0.10 and [HI] = 0.50 mol/dm³ gives Q = 0.50²/(0.10 × 0.10) = 25.
- Q<K means net forward change, Q>K means net reverse change, and Q = K means equilibrium under the stated conditions. Net forward change does not imply that the forward rate keeps increasing during the approach. Use the same temperature and concentration convention when comparing Q and K.

Which direction follows from Q25 and K49?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The comparison, not the individual sign, determines direction.
For H₂(g) + I₂(g) ⇌ 2HI(g), current concentrations are [H₂] = [I₂] = 0.050 and [HI] = 0.60 mol/dm³. Find Q.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Use the same powers as in Kc, but insert the current concentrations: Q = [HI]²/([H₂][I₂]) = 0.60²/(0.050 × 0.050) = 0.36/0.0025 = 144. Squaring HI comes from its coefficient two. Only after comparing Q with K at this temperature can the direction of net change be inferred; Q alone is not the equilibrium constant.
AHL R2.3: Build an ICE table with coefficients
- For initial [H₂] = [I₂] = 1.00 and [HI] = 0, let x mol/dm³ H₂ react. The changes are −x,−x, + 2x. Equilibrium concentrations are 1−x,1−x,2x. All entries must remain nonnegative and conserve each element.
- With Kc 49, 49 = (2x)²/(1−x)². Positive concentrations give 7 = 2x/(1−x), so x = 7/9. Keep that fraction until the end: [HI] = 14/9≈1.56, reactants 2/9≈0.222 mol/dm³. Rounding x to 0.78 too early makes the back-substituted quotient drift away from 49.
Why keep x = 7/9 until the final concentrations?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The HI amount is 2x and all entries are linked.
AHL R2.3: Determine K from measured equilibrium amount
- Invented homogeneous gas data: initially 2.00 mol SO₂ and 1.00 mol O₂ in 1.00 dm³, no SO₃. At equilibrium 1.60 mol SO₃ is present for 2SO₂ + O₂ ⇌ 2SO₃. The change consumes 1.60 mol SO₂ and 0.80 mol O₂.
- Remaining concentrations are 0.40 SO₂,0.20 O₂ and 1.60 SO₃ mol/dm³. Kc = 1.60²/(0.40² × 0.20) = 80 in the stated convention. The volume is 1.00 dm³ here; with another volume it must be included because the total coefficients differ across the equation.
For 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), initially 2.00 mol SO₂ and 1.00 mol O₂, with no SO₃, occupy a fixed 1.00 dm³. At equilibrium there is 1.60 mol SO₃. What is the equilibrium O₂ concentration?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The equation consumes one O₂ per two SO₃ formed. O₂ consumed = 1.60/2 = 0.80 mol. Remaining O₂ = 1.00 − 0.80 = 0.20 mol; divide by 1.00 dm³ to obtain 0.20 mol/dm³.
Initially 2.00 mol SO₂ and 1.00 mol O₂, with no SO₃, occupy 1.00 dm³. At equilibrium there is 1.60 mol SO₃. Find Kc for 2SO₂(g) + O₂(g) ⇌ 2SO₃(g).
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Making 1.60 mol SO₃ consumes 1.60 mol SO₂ and 0.80 mol O₂. Equilibrium amounts are 0.40, 0.20 and 1.60 mol. In 1.00 dm³ these are also the numerical concentrations. Thus Kc = [SO₃]²/([SO₂]²[O₂]) = 1.60²/(0.40² × 0.20) = 2.56/0.032 = 80. Initial amounts cannot be substituted for equilibrium values.
AHL R2.3: Let volume cancel only when it actually does
- In an idealized homogeneous esterification mixture, start with 1.00 mol acid and 1.00 mol ethanol, no ester or water. A dry catalyst contributes negligible water. Supplied equilibrium ester 0.67 mol implies 0.33 acid,0.33 ethanol and 0.67 water mol.
- All four mixture components enter Kc. Dividing each amount by the same volume cancels V because there are two total coefficients on each side. Kc = 0.67²/0.33²≈4.1. With supplied Kc 4.0 instead, x²/(1−x)² = 4 gives x = 2/3 mol. These are rounded teaching scenarios, not identical exact data.
For acid + ethanol ⇌ ester + water, all four components form one homogeneous mixture and have coefficient one. Why may their amounts in moles be used directly in Kc = [ester][water]/([acid][ethanol])?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Replace every concentration by n/V using the same mixture volume. Then Kc = [(n(ester)/V)(n(water)/V)]/[(n(acid)/V)(n(ethanol)/V)]. The two 1/V factors above and below cancel, leaving the mole ratio. These are mixture components, not separate pure liquid phases that can be omitted.
AHL R2.3: Validate a small depletion assumption
- For supplied N₂ + O₂ ⇌ 2NO, Kc 4.0 × 10⁻⁴ and initial reactants 0.50 mol/dm³ each with no NO, tentatively keep each reactant at 0.50. Then [NO]≈sqrt(4.0 × 10⁻⁴ × 0.50 × 0.50) = 0.010 mol/dm³.
- Producing 0.010 NO consumes 0.0050 of each reactant, only 1.0% of its starting 0.50. That supports this approximation 近似. State and check the depletion relative to every relevant reactant, rather than treating the phrase small K as sufficient proof.
For N₂ + O₂ ⇌ 2NO, initial [N₂] = [O₂] = 0.50 mol/dm³ with no NO. A small-depletion estimate gives equilibrium [NO] ≈ 0.010 mol/dm³ at fixed volume. What percentage of the initial N₂ is consumed in this approximation?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Two NO form for each N₂ consumed, so N₂ concentration falls by 0.010/2 = 0.0050 mol/dm³. Fraction consumed = 0.0050/0.50 = 0.010; percentage = 0.010 × 100 = 1.0%. This small depletion supports the stated approximation.
AHL R2.3: Reject a small K approximation that violates conservation
- For A ⇌ 2B with Kc 1.6 × 10⁻⁵ and initial[A]0.10 mol/dm³, the unchanged-A estimate gives[B]≈0.001265. Consumption of A is half that,0.0006325, or 0.63% of 0.10. The assumption is reasonable here.
- Keep the same Kc but start with[A]10⁻⁸ mol/dm³ and no B. The same shortcut predicts[B]4.0 × 10⁻⁷, above the absolute conservation maximum 2.0 × 10⁻⁸. Reject it: a small numerical constant alone does not guarantee a small fractional conversion. No quadratic is needed to detect the inconsistency.
For A ⇌ 2B at fixed volume, initially [A] = 1.0 × 10⁻⁸ mol/dm³ and no B is present. What is the maximum possible B concentration if all A converts?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The equation forms two B per A consumed. Complete conversion of the initial A gives the conservation maximum [B] = 2 × (1.0 × 10⁻⁸) = 2.0 × 10⁻⁸ mol/dm³. An equilibrium approximation predicting more B must be rejected.
AHL R2.3: Connect standard Gibbs energy 吉布斯能 and thermodynamic K
- The data-booklet relation is ΔG° = −RT lnK. Use kelvin and consistent energy units: with R8.31 J/mol/K, convert ΔG° from kJ/mol to J/mol. K here is dimensionless and activity-based, with specified standard states. A raw gas concentration quotient is not automatically the same number.
- Negative ΔG° gives K>1; positive ΔG° gives K<1; zero gives K1. For unequal coefficients, K1 does not require equal individual concentrations. At fixed temperature and pressure the total Gibbs energy is minimized at equilibrium subject to conservation.

Which constant belongs in ΔG° = −RT lnK?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
A logarithm in the thermodynamic relation uses an activity-based dimensionless ratio.
AHL R2.3: Keep guard digits through the antilogarithm
- For supplied ΔG°−33 kJ/mol at 298 K, lnK = 33000/(8.31 × 298) = 13.3259… . Exponentiating the unrounded result gives K≈6.1 × 10⁵. Rounding the exponent first can noticeably change the result, because exponentiation amplifies that rounding.
- For supplied ΔG°−11.4 kJ/mol at 298 K, lnK = 11400/(8.31 × 298) = 4.60349… and K≈99.83, or 1.0 × 10² to two significant figures. Conversely K10⁻³ gives ΔG° = −8.31 × 298 × ln(10⁻³)≈ + 17.1 kJ/mol. A base-ten logarithm cannot replace ln without its conversion factor.
Which operation recovers K from a calculated natural logarithm?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The inverse of ln is the exponential with base e.
Use ΔG° = −11.4 kJ/mol at 298 K and R = 8.31 J/(mol K). Find thermodynamic K to three significant figures.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
From ΔG° = −RT ln K, ln K = −ΔG°/(RT). Convert −11.4 kJ/mol to −11400 J/mol: ln K = 11400/(8.31 × 298) = 4.60349… . Exponentiating gives K = exp(4.60349…) = 99.8325… , or 99.8 to three significant figures. K is dimensionless here because the thermodynamic expression uses activities.
AHL R2.3: Separate the actual mixture from the standard reaction
- As an explanatory extension, actual reaction Gibbs energy is ΔrG = ΔG° + RT lnQ with activity-based Q. For supplied ΔG° + 5.00 kJ/mol, Q0.0100 and 298 K, this is 5000 + (8.31)(298)ln(0.0100)≈−6404 J/mol, or−6.40 kJ/mol. Net forward change is favoured.
- Here the equilibrium constant is exp(−5000/(8.31 × 298))≈0.133. When Q reaches K, actual ΔrG is zero, but the standard value remains + 5.00 kJ/mol. Saying every equilibrium requires standard ΔG°0 confuses two different quantities.
What is zero at equilibrium at fixed temperature and pressure?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The actual mixture term cancels the standard term when Q equals K.
Use ΔG° = +5.00 kJ/mol, Q = 0.0100, T = 298 K and R = 8.31 J/(mol K). Find actual ΔrG in kJ/mol.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Use ΔrG = ΔG° + RT ln Q. Convert R to 0.00831 kJ/(mol K) before adding to 5.00 kJ/mol: 5.00 + (0.00831 × 298 × ln 0.0100) = 5.00 − 11.40415… = −6.40415… kJ/mol, about −6.40. The forward change is favoured at this composition despite positive ΔG°; standard and actual reaction changes are different quantities.