Enzyme rate and controlled measurements
引入| English | 释义 | 拼音 |
|---|---|---|
| enzyme/ˈenzaɪm/ | 酶 | méi |
| catalyst/ˈkætəlɪst/ | 催化剂 | cuī huà jì |
| active site/ˈæktɪv saɪt/ | 活性位点 | huó xìng wèi diǎn |
| substrate/ˈsʌbstreɪt/ | 底物 | dǐ wù |
| enzyme-substrate complex/ˈenzaɪm ˈsʌbstreɪt ˈkɒmpleks/ | 酶-底物复合物 | méi - dǐ wù fù hé wù |
| endpoint | 终点 | zhōng diǎn |
| optimum temperature/ˈɒptɪməm ˈtemprɪtʃə/ | 最适温度 | zuì shì wēn dù |
| denaturation/ˌdenətʃəˈreɪʃn/ | 变性 | biàn xìng |
| competitive inhibitor/kəmˈpetɪtɪv ɪnˈhɪbɪtə/ | 竞争性抑制剂 | jìng zhēng xìng yì zhì jì |
| independent variable/ˌɪndɪˈpendənt ˈveərɪəbl/ | 自变量 | zì biàn liàng |
| buffer/ˈbʌfə/ | 缓冲液 | huǎn chōng yè |
Fermentation without yeast cells, 1897
- In 1897 Eduard Buchner ground yeast with sand, pressed out the juice and filtered away every living cell. The cell-free juice still turned sugar into ethanol and carbon dioxide.
- So the work was done by molecules, not by "life force". Buchner won the 1907 Nobel Prize, and these molecules are enzymes 酶 — biological catalysts 催化剂.
How an enzyme works
- An enzyme is a protein with a pocket called the active site 活性位点. Only a substrate 底物 with a complementary shape fits, so each enzyme catalyses one reaction.
- Substrate and enzyme collide and form an enzyme-substrate complex 酶-底物复合物. The products leave, and the unchanged enzyme can be used again thousands of times a second.
温度对酶活性的影响
活性取决于条件;此曲线是某一种酶的示意模型。
Why does each enzyme catalyse only one reaction?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Specificity comes from the fit between the active site and the substrate. The enzyme is not used up, and optimum temperatures differ between enzymes.
Measuring the rate
- In the amylase–starch practical, take a drop of the mixture every 10 s and add it to iodine on a spotting tile. The endpoint 终点 is the first drop that stays orange-brown: no starch is left.
- A shorter time means a faster reaction. Because the same amount of starch is digested each time, $\text{rate} \propto \dfrac{1}{t}$.
Starch disappears after 32 s. Calculate the rate as $\dfrac{1}{t}$, in per second, to 2 significant figures.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
$\dfrac{1}{32} = 0.03125$, which is 0.031 per second to 2 significant figures.
Worked example: amylase and temperature
Amylase and starch are tested at five temperatures. Endpoint times: 20 °C 80 s, 30 °C 40 s, 40 °C 25 s, 50 °C 50 s, 60 °C no endpoint after 300 s. Find the rates and the optimum.
- Method: rate $= \dfrac{1}{t}$, because the same starch is used up each time.
- Rates: $\dfrac{1}{80} = 0.0125$, $\dfrac{1}{40} = 0.025$, $\dfrac{1}{25} = 0.040$, $\dfrac{1}{50} = 0.020$ per second; at 60 °C the rate is about 0.
- Conclusion: the rate is highest at 40 °C, so the optimum is near 40 °C (between 30 °C and 50 °C). From 20 °C to 30 °C the rate doubles: $\dfrac{0.025}{0.0125} = 2$.
The endpoint takes 90 s at 15 °C and 45 s at 25 °C. How many times faster is the reaction at 25 °C?
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Rates are $\dfrac{1}{90}$ and $\dfrac{1}{45}$, and $\dfrac{1/45}{1/90} = 2$. Halving the time doubles the rate.
Temperature and pH
- Below the optimum temperature 最适温度, heating gives molecules more kinetic energy, so more successful collisions. Above it, bonds holding the protein's shape break; the active site changes shape and the substrate no longer fits. This is denaturation 变性, and it is permanent.
- pH changes the charges in the active site. Pepsin in the stomach works best near pH 2; salivary amylase near pH 7. Taq polymerase, from bacteria found in Yellowstone hot springs in 1969, works at 72 °C — the reason it is used in PCR.
Pepsin, a stomach enzyme, works best near pH 7.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The stomach is acidic, and pepsin's optimum is near pH 2. Salivary amylase has an optimum near pH 7.
Concentration and inhibitors
- More substrate raises the rate until every active site is busy; then the graph levels off and the enzyme concentration limits the rate. More enzyme raises the rate if substrate is in excess.
- A competitive inhibitor 竞争性抑制剂 has a similar shape to the substrate and blocks the active site; adding more substrate reduces its effect. A non-competitive inhibitor binds elsewhere and changes the active site's shape.
Match each change to its effect on the rate.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Each effect follows from the active site — whether it is free, how often it meets substrate, and whether it keeps its shape.
Controlled measurements
- Change one independent variable 自变量 only. Keep the others fixed: use a buffer 缓冲液 for pH, measured volumes and concentrations, and leave both solutions in the water bath for 5 minutes before mixing.
- Repeat each temperature three times and find a mean. A control with boiled amylase shows that the enzyme, not the starch on its own, causes the change.
A student tests the effect of temperature on amylase. Which must be kept the same?
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Temperature is the independent variable, so it is changed on purpose. Everything else that affects rate is controlled.
Put the method in order.
难度 3/5 · 今日首次完成可获 200 金币及少量额外奖励
Both solutions must reach the bath temperature before mixing, or the first part of the reaction happens at the wrong temperature.
"Cold denatures enzymes" is wrong. At 5 °C the molecules move slowly and collide less often, so the rate is low — but the active site keeps its shape, and warming the mixture restores the rate. Only high temperature or extreme pH changes the shape for good.
An enzyme speeds up one reaction because only its substrate fits the active site. Rate rises with temperature up to the optimum, then falls as the enzyme denatures; each enzyme has its own best pH. With a fixed endpoint, use $\dfrac{1}{t}$ as the rate, and change only one variable at a time.
A protease is tested at 30 °C (endpoint 60 s), 45 °C (30 s) and 70 °C (no endpoint after 10 minutes). Calculate the rates and explain the pattern.
A full answer calculates, then explains each part of the curve.