跳到主要内容

Pearson Edexcel · International A-Level

物理

本课程的文件、样卷和课程大纲。

← 考试

资格代码: XPH11 / YPH11

近期真题

78 真题与评分标准对

浏览文件和评分标准 →

讲义、练习卷和幻灯片

共享主题文档保留其原始课程和主题名称。请使用所选考试局的考纲来确定覆盖范围、等级和考试要求。

讲义 · Pearson Edexcel · International A-Level · 物理 (6)
练习页 · Pearson Edexcel · International A-Level · 物理 (38)
演示文稿幻灯片 · Pearson Edexcel · International A-Level · 物理 (6)
习题讲解幻灯片 · Pearson Edexcel · International A-Level · 物理 (69)
教学指南 · Pearson Edexcel · International A-Level · 物理 (1)
讲义 · A-Level 物理 (25)
练习页 · A-Level 物理 (106)
演示文稿幻灯片 · A-Level 物理 (25)
习题讲解幻灯片 · A-Level 物理 (202)

课程单元与学习目标

这些课程教授选定的教学目标。请检查剩余的覆盖缺口;本材料并非完整的备考方案。

1 · 力学与材料
  • Rate of change of displacement.
  • The gradient of a displacement-time graph is velocity. The area under a velocity-time graph gives displacement. A constant-acceleration formula is valid only when its assumption is justified.
  • Choose a positive direction and state it. Use a light gate or video with a known scale and frame interval for repeatable motion measurements. Avoid assuming hand timing is exact over very short intervals.
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
  • Energy transferred per unit time.
  • Define the system and useful output before calculating efficiency. Doubling speed quadruples kinetic energy at constant mass. Power describes transfer per time, not total energy.
  • Measure a lifting height and load, time the lift, and record electrical input with suitable instruments. Repeat trials and account for heating or friction as transfers, not missing energy.
速度
位移的变化率
加速度
速度的变化率
动量
质量乘以速度
合力
物体所受合力的矢量和
权力
单位时间内转移的能量
效率
有用输出除以总输入
2 · 波与电学
  • Distance between successive points in phase.
  • At a boundary, frequency stays fixed by the source. A change of speed changes wavelength. Refraction follows from speed differences; angles are measured from the normal.
  • Measure several wavelengths and divide to reduce fractional reading uncertainty. Use a ray box with a normal drawn at the boundary. Keep the beam away from eyes and record incident and refracted angles clearly.
  • Rate of flow of charge.
  • Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
  • Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
  • A quantum of electromagnetic radiation.
  • Use photon energy = Planck constant × frequency. Maximum kinetic energy = photon energy - work function. Increasing intensity at fixed frequency increases photon arrival rate, not individual photon energy.
  • Read axes carefully on a stopping-potential or kinetic-energy graph. Identify threshold frequency from the zero-energy intercept. State the metal and experimental conditions because work function is material-specific.
波长
相邻同相点之间的距离
频率
单位时间内的振动次数
电流
电荷流动速率
电位差
单位电荷转移的能量
光子
电磁辐射的一个量子
逸出功
释放电子所需的最小表面能量
3 · 物理实验技能 I
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
不确定性
测量结果中量化的限制因素
系统误差
一致的测量偏差
4 · 进阶力学、场与粒子
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
  • Creation of emf by changing flux linkage.
  • Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
  • Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
  • A description of gravitational force per unit mass.
  • For a point mass or outside a spherical mass, field strength follows an inverse-square distance dependence. Use distance from the centre, not height above the surface alone.
  • State the circular-orbit approximation and ignore atmospheric drag only when justified. Draw the force toward the central body and velocity tangential to the orbit. Do not add an outward force merely because the path is circular.
动量
质量乘以速度
合力
物体所受合力的矢量和
入职
通过改变磁通链数产生电动势
变压器
通过变化的磁通在线圈间传递能量的装置
引力场
单位质量所受引力作用的描述
向心力
指向弯曲路径中心的合力
5 · 热力学、辐射、振荡与宇宙学
  • Energy per mass per temperature rise.
  • Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
  • Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
  • Temperature on the kelvin scale.
  • At fixed amount and volume, pressure is proportional to kelvin temperature. At fixed temperature and amount, pressure is inversely proportional to volume. State which quantities are fixed before choosing a relationship.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
  • Time for activity or undecayed population to halve.
  • Subtract background counts measured over the same time interval. Distinguish irradiation from contamination. Shielding, distance and reduced exposure time can reduce risk under a school-controlled procedure.
  • Use teacher-managed sources and the school radiation rules. Record count duration and repeat background measurements. Do not extrapolate a half-life from one nucleus or from uncorrected readings.
  • A large response to periodic forcing near a natural frequency.
  • Velocity is greatest near equilibrium for ideal SHM, while acceleration magnitude is greatest at extreme displacement. Resonance can occur near the natural frequency under periodic driving, with amplitude limited by damping.
  • Measure time for several complete oscillations and divide. Define a cycle consistently and use a small displacement when the model requires it. Keep pendulum paths clear and record damping effects rather than assuming perfect motion.
  • Total emitted power.
  • For isotropic emission without absorption, flux follows an inverse-square relationship with distance. Observed brightness alone therefore cannot establish luminosity.
  • Keep distance units consistent, identify which quantities are intrinsic to the star, and distinguish observational evidence from a model of stellar evolution. Do not confuse a red giant stage with every possible final remnant.
比热容
单位质量每升高单位温度所需的能量
潜热
与物态变化相关的能量
绝对温度
开尔文温标上的温度
理想气体
具有特定简化假设的气体模型
半衰期
活动或衰变粒子数减半所需的时间
背景辐射
除被研究放射源外测得的辐射
共振
在自然频率附近受周期性驱动时产生的大幅响应
阻尼
从振荡系统中转移出去的能量
光度
总发射功率
守恒定律的推论
单位面积接收的功率
6 · 物理实验技能 II
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
不确定性
测量结果中量化的限制因素
系统误差
一致的测量偏差

备考指南

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.
  • This package uses the 2018 specification, current for these assessments. Pearson announces first teaching of a redeveloped course from September 2027; do not mix its future content into the current Unit 1–6 route.

仍需教学覆盖内容

  • Full material stress/strain, fluid and mechanical statement coverage remains.
  • Full superposition, quantum wave evidence, resistivity/emf and network statements remain.
  • All AS core practicals and written graph/design objectives remain.
  • Circular motion, electric/magnetic field calculations, capacitors and particle physics remain.
  • Full thermodynamic/radiation/stellar objectives remain.
  • Full A2 practical design, transformations and uncertainty analysis remain.

课程大纲和样件文件

课程资料

课程准备

文档已提供。并非所有课程都具备考试局特定的注释、测评及交互式历年真题练习。

课程 →

登录或创建账户

IGCSE, A-Level & AP