跳到主要内容

Pearson Edexcel · International A-Level

化学

本课程的文件、样卷和课程大纲。

← 考试

资格代码: XCH11 / YCH11

近期真题

77 真题与评分标准对

浏览文件和评分标准 →

讲义、练习卷和幻灯片

共享主题文档保留其原始课程和主题名称。请使用所选考试局的考纲来确定覆盖范围、等级和考试要求。

讲义 (6)
练习页 (73)
演示文稿幻灯片 (6)
习题讲解幻灯片 (93)
教学指南 (1)
讲义 · A-Level 化学 (37)
练习页 · A-Level 化学 (90)
演示文稿幻灯片 · A-Level 化学 (37)
习题讲解幻灯片 · A-Level 化学 (165)

课程单元与学习目标

这些课程教授选定的教学目标。请检查剩余的覆盖缺口;本材料并非完整的备考方案。

1 · 结构、键合与有机化学导论
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
摩尔
物质的量的SI单位
限制反应物
限制可能产物量的反应物
离子键
带相反电荷离子之间的吸引力。
离域电子
未局限于单个原子或化学键中的电子。
官能团
决定特征反应的原子团
异构体
具有相同分子式但结构不同的化合物
2 · 热化学、族化学、卤代烷和醇
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
放热反应
向环境转移能量
焓变
指定过程在恒压下的热变化
氧化
失去电子
还原
获得电子
活化能
反应途径的能量障碍
率
每单位时间测量量的变化
官能团
决定特征反应的原子团
异构体
具有相同分子式但结构不同的化合物
3 · 化学实践技能 I
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
滴定量
两次滴定管读数之间释放的体积
等当点
化学计量反应完成的点
色谱法
利用两相进行分离
Rf
斑点移动距离除以溶剂前沿移动距离
不确定性
测量结果中量化的限制因素
系统误差
一致的测量偏差
4 · 反应速率、平衡与进一步有机化学
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • A state with equal forward and reverse reaction rates.
  • A concentration or pressure change disturbs the balance. The system responds toward a new equilibrium. Temperature changes can also change the equilibrium constant; a catalyst changes how quickly equilibrium is reached.
  • State the balanced equation and whether the forward reaction is exothermic before predicting a temperature effect. Count gas coefficients when considering pressure; pressure has no composition effect when gaseous amounts are equal on both sides.
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
活化能
反应途径的能量障碍
率
每单位时间测量量的变化
平衡
正逆反应速率相等的状态
可逆反应
可双向进行的反应
放热反应
向环境转移能量
焓变
指定过程在恒压下的热变化
官能团
决定特征反应的原子团
异构体
具有相同分子式但结构不同的化合物
5 · 过渡金属与有机氮化学
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
氧化
失去电子
还原
获得电子
官能团
决定特征反应的原子团
异构体
具有相同分子式但结构不同的化合物
色谱法
利用两相进行分离
Rf
斑点移动距离除以溶剂前沿移动距离
6 · 化学实践技能 II
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
滴定量
两次滴定管读数之间释放的体积
等当点
化学计量反应完成的点
不确定性
测量结果中量化的限制因素
系统误差
一致的测量偏差

备考指南

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.

仍需教学覆盖内容

  • Full topic 1–5 statement coverage remains.
  • Intermolecular forces, Groups 1/2/7, halogenoalkanes and alcohol chemistry remain.
  • All AS core practicals, preparation methods and practical-paper objectives remain.
  • Rate equations, entropy, acid-base equilibria, carbonyls/acids/chirality remain.
  • Transition-metal complexes, electrode potentials, organic nitrogen, synthesis and spectroscopy remain.
  • A2 synthesis, purification, quantitative analysis and practical-paper coverage remain.

课程大纲和样件文件

课程资料

课程准备

文档已提供。并非所有课程都具备考试局特定的注释、测评及交互式历年真题练习。

课程 →

登录或创建账户

IGCSE, A-Level & AP