International Baccalaureate · IB Diploma · Design Technology

Раздаточные материалы, рабочие листы и слайды

Общие документы по темам сохраняют исходные названия курса и темы. Используйте спецификацию выбранной вами экзаменационной системы для охвата, уровня сложности и требований к экзамену.

Раздаточные материалы · International Baccalaureate · IB Diploma · Design Technology · HL (4)

Листы заданий · International Baccalaureate · IB Diploma · Design Technology · HL (5)

Презентационные слайды · International Baccalaureate · IB Diploma · Design Technology · HL (4)

Слайды с разбором упражнений · International Baccalaureate · IB Diploma · Design Technology · HL (5)

Учебные модули и цели обучения

Эти уроки охватывают выбранные цели курса. Проверьте оставшиеся пробелы в материале; это не является полной программой подготовки.

Уроки →Практика лексики →

A · Проектирование: теория

Designing the fit between people, tasks and products.
Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
Measurement of human body dimensions for a specified population and method.
A clearance dimension often needs to consider larger relevant body dimensions, while reach can require smaller relevant dimensions. Neither principle automatically selects a universal percentile. The measured population, posture, clothing, capability and task determine relevance. Consider physical, perceptual and cognitive demands together rather than assuming body size explains every usability issue.
Define a consenting user group and task. Use attributed data or anonymous teacher-approved measurements, record measurement posture and units, and test safe low-fidelity models before construction. Include users whose access needs differ. Set measurable acceptance criteria and retain qualitative feedback about grip, visibility and comprehension alongside dimensions.

эргономика: Изучение взаимодействия между людьми, задачами и системами для обоснования проектирования
спецификация: Измеримые требования, которым должно удовлетворять предлагаемое решение
антропометрия: Измерение размеров тела человека для определенной группы населения и метода

B · Проектирование: практика

A developing version used to test a solution.
State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.
The allowed range of variation in a specified dimension.
For a worst-case clearance model, subtract the largest shaft from the smallest hole for minimum clearance, and the smallest shaft from the largest hole for maximum clearance. The calculation assumes the stated dimensional limits and ideal geometry. Shape, alignment, temperature and measurement uncertainty can affect actual assembly.
Use safe school-made models or a provided dimension dataset. Specify dimension units, nominal values and limits before testing. Measure with an appropriate calibrated instrument at agreed positions, record every result and classify against the specified range. Retain rejected pieces and explain whether the problem concerns the design limits, process variation or measurement method.

прототип: Развивающаяся версия, используемая для тестирования решения
итерации: Редактирование, основанное на доказательствах и повторном тестировании
толерантности: Допустимый диапазон вариаций определенного размера
свободное пространство: Размерное пространство между соединяемыми деталями при указанной модели

C · Проектирование: контекст

Design supporting separation and replacement of parts.
Compare a common service over a stated lifetime. Separate fixed tooling cost from cost per item. Include repair, energy, transport and realistic end-of-life pathways rather than using a recycled label as the whole judgement.
Create a bill of materials and an annotated assembly plan. Test whether a worn part can be replaced with normal tools. For HL project development, evaluate production feasibility and commercial assumptions against the applicable cohort guide.

проектирование для разборки: Проектирование, обеспечивающее разделение и замену компонентов
толерантности: Допустимая размерная вариация

Project · Проект по проектированию

Designing the fit between people, tasks and products.
Choose data for the target population and task. Clearance often needs a larger-user percentile; reach may need a smaller-user percentile. A single mean dimension cannot satisfy every design constraint.
Observe an approved low-risk task with consent, interview users without leading questions, and record measurable success criteria. Test an early model before committing to expensive materials. Do not collect unnecessary personal measurements.
A developing version used to test a solution.
State what each model includes and omits. Compare tests with the same load, geometry and conditions. Iteration means using evidence to revise a solution and testing the revision against the original success criteria.
Make a low-risk model under school workshop rules. Record dimensions, material, process and test method. Use photographs, measurements and user feedback as evidence. Machines and load tests require teacher supervision and approved guards.

эргономика: Проектирование соответствия между людьми, задачами и продуктами
спецификация: Измеримые требования, которым должно удовлетворять предлагаемое решение
прототип: Развивающаяся версия, используемая для тестирования решения
итерации: Редактирование, основанное на доказательствах и повторном тестировании

Подготовка к этой квалификационной программе

The official 2027 update confirms design in theory, design in practice and design in context.
Do not display old 2016 Topics 1–10 or its 40% design-project model as the current 2027 assessment.
The school project needs user evidence, measurable specification, concepts, supervised prototype/testing and evaluation; written diagnostics cannot replace it.
SL/HL objective and assessment differences remain unverified until current guide retrieval succeeds.

Требуются дополнительные учебные материалы

Exact 2027 topic codes and SL/AHL scope await the full guide.
Exact 2027 modelling/material/production objectives await the full guide.
Exact 2027 social/environmental/commercial objectives and AHL distinctions await the guide.
Use a real school-supervised design problem; current rubric and SL/HL project demands await the guide.

Спецификации и образцы документов

Материалы курса

Подготовка к курсу

Документы доступны. Заметки, специфичные для экзаменационного органа, тесты и интерактивная практика с прошлыми экзаменами еще не доступны для всех курсов.

Уроки →