OxfordAQA · International GCSE
Física
Papers, amostras e documentos curriculares deste curso.
Código da qualificação: 9203
Material impresso, folhas de exercícios e slides
Documentos compartilhados mantêm seus títulos originais de curso e tópico. Use a especificação do tabuleiro escolhido para cobertura, nível e requisitos de exame.
Material de apoio · OxfordAQA · International GCSE · Physics (8)
Folhas de exercícios · OxfordAQA · International GCSE · Physics (16)
- 1.1 Forces interactions and motion
- 1.2 Momentum safety and moments (P)
- 2.1 Forces work and power
- 2.2 Dissipation efficiency and resources
- 3.1 Wave properties and the EM spectrum
- 3.2 Sound reflection refraction and lenses
- 4.1 Kinetic theory and latent heat
- 4.2 Energy transfers by particles
- 5.1 Electrical circuits
- 5.2 Magnetismo e eletromagnetismo
- 6.1 Generators transformers and the home (P)
- 6.2 The motor effect and electrical energy (P)
- 7.1 Atomic structure and radiation
- 7.2 Fission and fusion
- 8.1 Star life cycles and orbits
- 8.2 Red shift and the Big Bang (P)
Slides de apresentação · OxfordAQA · International GCSE · Physics (8)
Slides de resolução de exercícios · OxfordAQA · International GCSE · Physics (16)
- 1.1 Forces interactions and motion · Walk-through
- 1.2 Momentum safety and moments (P) · Walk-through
- 2.1 Forces work and power · Walk-through
- 2.2 Dissipation efficiency and resources · Walk-through
- 3.1 Wave properties and the EM spectrum · Walk-through
- 3.2 Sound reflection refraction and lenses · Walk-through
- 4.1 Kinetic theory and latent heat · Walk-through
- 4.2 Energy transfers by particles · Walk-through
- 5.1 Electrical circuits · Walk-through
- 5.2 Magnetismo e eletromagnetismo · Walk-through
- 6.1 Generators transformers and the home (P) · Walk-through
- 6.2 The motor effect and electrical energy (P) · Walk-through
- 7.1 Atomic structure and radiation · Walk-through
- 7.2 Fission and fusion · Walk-through
- 8.1 Star life cycles and orbits · Walk-through
- 8.2 Red shift and the Big Bang (P) · Walk-through
Guias de ensino · OxfordAQA · International GCSE · Physics (1)
Material de apoio · Física IGCSE (6)
Folhas de exercícios · Física IGCSE (24)
- 1.1 Quantidades físicas e técnicas de medição
- 1.2 Movimento
- 1.3 Massa e peso
- 1.4 Densidade
- 1.5 Forças
- 1.6 Momento
- 1.7 Energia, trabalho e potência
- 1.8 Pressão
- 2.1 Modelo cinético de partículas da matéria
- 2.2 Propriedades térmicas e temperatura
- 2.3 Transferência de energia térmica
- 3.1 Propriedades gerais de ondas
- 3.2 Claro
- 3.3 Espectro eletromagnético
- 3.4 Som
- 4.1 Fenômenos simples de magnetismo
- 4.2 Quantidades elétricas
- 4.3 Circuitos elétricos
- 4.4 Segurança elétrica
- 4.5 Efeitos eletromagnéticos
- 5.1 O modelo nuclear do átomo
- 5.2 Radioatividade
- 6.1 A Terra e o Sistema Solar
- 6.2 Estrelas e o Universo
Slides de apresentação · Física IGCSE (6)
Slides de resolução de exercícios · Física IGCSE (47)
- 1.1 Quantidades físicas e técnicas de medição · Walk-through
- 1.1 Quantidades físicas e técnicas de medição · Past-paper walk-through
- 1.2 Movimento · Walk-through
- 1.2 Movimento · Past-paper walk-through
- 1.3 Massa e peso · Walk-through
- 1.3 Massa e peso · Past-paper walk-through
- 1.4 Densidade · Walk-through
- 1.4 Densidade · Past-paper walk-through
- 1.5 Forças · Walk-through
- 1.5 Forças · Past-paper walk-through
- 1.6 Momento · Walk-through
- 1.6 Momento · Past-paper walk-through
- 1.7 Energia, trabalho e potência · Walk-through
- 1.7 Energia, trabalho e potência · Past-paper walk-through
- 1.8 Pressão · Walk-through
- 1.8 Pressão · Past-paper walk-through
- 2.1 Modelo cinético de partículas da matéria · Walk-through
- 2.1 Modelo cinético de partículas da matéria · Past-paper walk-through
- 2.2 Propriedades térmicas e temperatura · Walk-through
- 2.2 Propriedades térmicas e temperatura · Past-paper walk-through
- 2.3 Transferência de energia térmica · Walk-through
- 2.3 Transferência de energia térmica · Past-paper walk-through
- 3.1 Propriedades gerais de ondas · Walk-through
- 3.1 Propriedades gerais de ondas · Past-paper walk-through
- 3.2 Claro · Walk-through
- 3.2 Claro · Past-paper walk-through
- 3.3 Espectro eletromagnético · Walk-through
- 3.3 Espectro eletromagnético · Past-paper walk-through
- 3.4 Som · Walk-through
- 3.4 Som · Past-paper walk-through
- 4.1 Fenômenos simples de magnetismo · Walk-through
- 4.1 Fenômenos simples de magnetismo · Past-paper walk-through
- 4.2 Quantidades elétricas · Walk-through
- 4.2 Quantidades elétricas · Past-paper walk-through
- 4.3 Circuitos elétricos · Walk-through
- 4.3 Circuitos elétricos · Past-paper walk-through
- 4.4 Segurança elétrica · Walk-through
- 4.5 Efeitos eletromagnéticos · Walk-through
- 4.5 Efeitos eletromagnéticos · Past-paper walk-through
- 5.1 O modelo nuclear do átomo · Walk-through
- 5.1 O modelo nuclear do átomo · Past-paper walk-through
- 5.2 Radioatividade · Walk-through
- 5.2 Radioatividade · Past-paper walk-through
- 6.1 A Terra e o Sistema Solar · Walk-through
- 6.1 A Terra e o Sistema Solar · Past-paper walk-through
- 6.2 Estrelas e o Universo · Walk-through
- 6.2 Estrelas e o Universo · Past-paper walk-through
Unidades do curso e objetivos de aprendizagem
Estas aulas ensinam objetivos selecionados do curso. Verifique as lacunas de cobertura restantes; o material não é um programa completo de preparação.
3.1 · Forças e seus efeitos
- Rate of change of displacement.
- The gradient of a displacement-time graph is velocity. The area under a velocity-time graph gives displacement. A constant-acceleration formula is valid only when its assumption is justified.
- Choose a positive direction and state it. Use a light gate or video with a known scale and frame interval for repeatable motion measurements. Avoid assuming hand timing is exact over very short intervals.
- Mass multiplied by velocity.
- Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
- Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
- velocidade
- Taxa de variação do deslocamento
- aceleração
- Taxa de variação da velocidade
- momento
- Massa multiplicada pela velocidade
- força resultante
- A soma vetorial das forças atuando em um objeto
3.2 · Energia
- Energy transferred per unit time.
- Define the system and useful output before calculating efficiency. Doubling speed quadruples kinetic energy at constant mass. Power describes transfer per time, not total energy.
- Measure a lifting height and load, time the lift, and record electrical input with suitable instruments. Repeat trials and account for heating or friction as transfers, not missing energy.
- potência
- Energia transferida por unidade de tempo
- eficiência
- Saída útil dividida pela entrada total
3.3 · Ondas
- Distance between successive points in phase.
- At a boundary, frequency stays fixed by the source. A change of speed changes wavelength. Refraction follows from speed differences; angles are measured from the normal.
- Measure several wavelengths and divide to reduce fractional reading uncertainty. Use a ray box with a normal drawn at the boundary. Keep the beam away from eyes and record incident and refracted angles clearly.
- comprimento de onda
- Distância entre pontos sucessivos em fase
- frequência
- Número de oscilações por unidade de tempo
3.4 · Modelo particulado da matéria
- Energy per mass per temperature rise.
- Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
- Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
- Temperature on the kelvin scale.
- State which quantities stay fixed. A pressure-volume relation requires consistent units and a fixed temperature. The kelvin-based temperature ratio is an extension only where the course explicitly specifies it.
- Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
- capacidade térmica específica
- Energia por massa por elevação de temperatura
- calor latente
- Energia associada a uma mudança de estado
- temperatura absoluta
- Temperatura na escala kelvin
- gás ideal
- Modelo de gás com suposições simplificadoras especificadas
3.5 · Eletricidade e magnetismo
- Rate of flow of charge.
- Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
- Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
- Creation of emf by changing flux linkage.
- Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
- Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
- corrente
- Taxa de fluxo de carga
- diferença de potencial
- Energia transferida por unidade de carga
- indução
- Criação de f.e.m. pela variação do enlace de fluxo
- transformador
- Dispositivo que transfere energia entre bobinas mediante variação de fluxo
3.6 · Geração e distribuição de eletricidade e uso doméstico
- Creation of emf by changing flux linkage.
- Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
- Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
- Rate of flow of charge.
- Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
- Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
- indução
- Criação de f.e.m. pela variação do enlace de fluxo
- transformador
- Dispositivo que transfere energia entre bobinas mediante variação de fluxo
- corrente
- Taxa de fluxo de carga
- diferença de potencial
- Energia transferida por unidade de carga
3.7 · Física nuclear
- Time for activity or undecayed population to halve.
- Subtract background counts measured over the same time interval. Distinguish irradiation from contamination. Shielding, distance and reduced exposure time can reduce risk under a school-controlled procedure.
- Use teacher-managed sources and the school radiation rules. Record count duration and repeat background measurements. Do not extrapolate a half-life from one nucleus or from uncorrected readings.
- vida média
- Tempo para a atividade ou população indesejada reduzir à metade
- radiação de fundo
- Radiação medida separadamente da fonte investigada
3.8 · Física espacial
- A stable stellar phase sustained by core hydrogen fusion.
- Read a life-cycle diagram as a model of stages and conditions, not a timed film of one star. The Sun is expected to follow the lower-mass route. Fusion combines light nuclei; it differs from fission of a heavy nucleus.
- Compare attributed stellar observations with predicted properties of each stage. Keep star, planet, galaxy and universe distinct. An orbiting body can have constant speed while its velocity changes direction.
- sequência principal
- Fase estelar estável sustentada pela fusão de hidrogênio no núcleo
- anã branca
- Resíduo compacto na rota das estrelas de baixa massa
Preparação para esta qualificação
- 9203 separate Physics; do not relabel AQA 8463 or Cambridge 0625.
- Two untiered papers, each 90 marks and 1 h 30 min, each worth 50%; both can assess all content.
- Practical skills are assessed in writing; retain P labels distinguishing separate Physics.
Cobertura do ensino ainda necessária
- All P-labelled separate-Physics statements including terminal velocity, centre of mass and moments remain.
- Complete resources and energy transfer objectives remain.
- Full sound, ultrasound, refraction/TIR and lens P statements remain.
- Use IGCSE gas variant; complete kinetic theory and energy changes remain.
- Full circuit, magnet and electromagnetic statements remain.
- Separate-Physics generator/transmission P statements and all household safety remain.
- Complete nuclear models, radiation, fission and P fusion statements remain.
- Full star-life-cycle and cosmology statements remain.
Especificações e documentos de exemplo
Materiais do curso
Preparação do curso
Os documentos estão disponíveis. Notas específicas da banca, avaliações e prática interativa de provas anteriores ainda não estão disponíveis para todos os cursos.
Lições →