Pular para o conteúdo

Pearson Edexcel · International GCSE

Física

Papers, amostras e documentos curriculares deste curso.

← Provas

Código da qualificação: 4PH1

Provas passadas recentes

18 pares de prova e gabarito

Consultar provas e esquemas de correção →

Material impresso, folhas de exercícios e slides

Documentos compartilhados mantêm seus títulos originais de curso e tópico. Use a especificação do tabuleiro escolhido para cobertura, nível e requisitos de exame.

Material de apoio (8)
Folhas de exercícios (18)
Slides de apresentação (8)
Slides de resolução de exercícios (18)
Guias de ensino (1)
Material de apoio · Física IGCSE (6)
Folhas de exercícios · Física IGCSE (24)
Slides de apresentação · Física IGCSE (6)
Slides de resolução de exercícios · Física IGCSE (47)

Unidades do curso e objetivos de aprendizagem

Estas aulas ensinam objetivos selecionados do curso. Verifique as lacunas de cobertura restantes; o material não é um programa completo de preparação.

1 · Forças e movimento
  • Rate of change of displacement.
  • The gradient of a displacement-time graph is velocity. The area under a velocity-time graph gives displacement. A constant-acceleration formula is valid only when its assumption is justified.
  • Choose a positive direction and state it. Use a light gate or video with a known scale and frame interval for repeatable motion measurements. Avoid assuming hand timing is exact over very short intervals.
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
velocidade
Taxa de variação do deslocamento
aceleração
Taxa de variação da velocidade
momento
Massa multiplicada pela velocidade
força resultante
A soma vetorial das forças atuando em um objeto
2 · Eletricidade
  • Rate of flow of charge.
  • Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
  • Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
corrente
Taxa de fluxo de carga
diferença de potencial
Energia transferida por unidade de carga
3 · Ondas
  • Distance between successive points in phase.
  • At a boundary, frequency stays fixed by the source. A change of speed changes wavelength. Refraction follows from speed differences; angles are measured from the normal.
  • Measure several wavelengths and divide to reduce fractional reading uncertainty. Use a ray box with a normal drawn at the boundary. Keep the beam away from eyes and record incident and refracted angles clearly.
comprimento de onda
Distância entre pontos sucessivos em fase
frequência
Número de oscilações por unidade de tempo
4 · Recursos energéticos e transferências de energia
  • Energy transferred per unit time.
  • Define the system and useful output before calculating efficiency. Doubling speed quadruples kinetic energy at constant mass. Power describes transfer per time, not total energy.
  • Measure a lifting height and load, time the lift, and record electrical input with suitable instruments. Repeat trials and account for heating or friction as transfers, not missing energy.
  • Energy per mass per temperature rise.
  • Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
  • Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
potência
Energia transferida por unidade de tempo
eficiência
Saída útil dividida pela entrada total
capacidade térmica específica
Energia por massa por elevação de temperatura
calor latente
Energia associada a uma mudança de estado
5 · Sólidos, líquidos e gases
  • Temperature on the kelvin scale.
  • State which quantities stay fixed. A pressure-volume relation requires consistent units and a fixed temperature. The kelvin-based temperature ratio is an extension only where the course explicitly specifies it.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
  • Energy per mass per temperature rise.
  • Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
  • Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
temperatura absoluta
Temperatura na escala kelvin
gás ideal
Modelo de gás com suposições simplificadoras especificadas
capacidade térmica específica
Energia por massa por elevação de temperatura
calor latente
Energia associada a uma mudança de estado
6 · Magnetismo e eletromagnetismo
  • Creation of emf by changing flux linkage.
  • Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
  • Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
indução
Criação de f.e.m. pela variação do enlace de fluxo
transformador
Dispositivo que transfere energia entre bobinas mediante variação de fluxo
7 · Radioatividade e partículas
  • Time for activity or undecayed population to halve.
  • Subtract background counts measured over the same time interval. Distinguish irradiation from contamination. Shielding, distance and reduced exposure time can reduce risk under a school-controlled procedure.
  • Use teacher-managed sources and the school radiation rules. Record count duration and repeat background measurements. Do not extrapolate a half-life from one nucleus or from uncorrected readings.
vida média
Tempo para a atividade ou população indesejada reduzir à metade
radiação de fundo
Radiação medida separadamente da fonte investigada
8 · Astrofísica
  • A stable stellar phase sustained by core hydrogen fusion.
  • Read a life-cycle diagram as a model of stages and conditions, not a timed film of one star. The Sun is expected to follow the lower-mass route. Fusion combines light nuclei; it differs from fission of a heavy nucleus.
  • Compare attributed stellar observations with predicted properties of each stage. Keep star, planet, galaxy and universe distinct. An orbiting body can have constant speed while its velocity changes direction.
sequência principal
Fase estelar estável sustentada pela fusão de hidrogênio no núcleo
anã branca
Resíduo compacto na rota das estrelas de baixa massa

Preparação para esta qualificação

  • Linear 4PH1; retain P-suffixed separate-Physics objectives and do not introduce tiers.
  • Paper 1P: 110 marks, 2 h, 61.1%; Paper 2P: 70 marks, 1 h 15 min, 38.9%.
  • Record the formula provision in the actual paper; retain practical and graph skills throughout.

Cobertura do ensino ainda necessária

  • Full graph, force, momentum and P-extension statements remain.
  • Mains safety, charge, electrostatics and circuit-energy statements remain.
  • Sound, spectrum, refraction and total internal reflection statements including P extensions remain.
  • Conduction/convection/radiation and resource comparisons remain.
  • Use IGCSE gas variant; density, pressure and all gas-law P statements remain.
  • Motor and induction objectives need complete P-extension mapping.
  • Nuclide equations, fission/fusion, sources and radiation uses remain.
  • Stellar evolution, universe evolution and redshift objectives remain.

Especificações e documentos de exemplo

Materiais do curso

Preparação do curso

Os documentos estão disponíveis. Notas específicas da banca, avaliações e prática interativa de provas anteriores ainda não estão disponíveis para todos os cursos.

Lições →

Entrar ou criar conta

IGCSE, A-Level & AP