본문 바로가기

피어슨 에덱셀 · International A-Level

물리학

이 과정의 문제지, 표본 및 커리큘럼 문서입니다.

← 시험

자격 인증 코드: XPH11 / YPH11

최근 과거문제

78 문제지 및 채점 기준 쌍

문제지와 채점 기준 보기 →

핸드아웃, 연습지 및 슬라이드

공유된 주제 문서는 출처 과정 및 주제 제목을 유지합니다. 선택한 보드의 규정을 사용하여 커버리지, tiers 및 고사 요건을 적용하십시오.

교재 자료 (6)
연습지 (38)
프레젠테이션 슬라이드 (6)
연습 walkthrough 슬라이드 (69)
수업 가이드 (1)
교재 자료 · A-Level 물리학 (25)
연습지 · A-Level 물리학 (106)
프레젠테이션 슬라이드 · A-Level 물리학 (25)
연습 walkthrough 슬라이드 · A-Level 물리학 (202)

과정 단위 및 학습 목표

이 수업은 선택된 과정 목표를 다룹니다. 나머지 미달성 항목을 확인하십시오. 이 자료는 완전한 준비 프로그램이 아닙니다.

1 · 역학 및 물질
  • Rate of change of displacement.
  • The gradient of a displacement-time graph is velocity. The area under a velocity-time graph gives displacement. A constant-acceleration formula is valid only when its assumption is justified.
  • Choose a positive direction and state it. Use a light gate or video with a known scale and frame interval for repeatable motion measurements. Avoid assuming hand timing is exact over very short intervals.
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
  • Energy transferred per unit time.
  • Define the system and useful output before calculating efficiency. Doubling speed quadruples kinetic energy at constant mass. Power describes transfer per time, not total energy.
  • Measure a lifting height and load, time the lift, and record electrical input with suitable instruments. Repeat trials and account for heating or friction as transfers, not missing energy.
속도
변위의 변화율
가속도
속도의 변화율
운동량
질량과 속도의 곱
합성력
The vector sum of forces on an object
출력
단위 시간당 전달되는 에너지
효율(efficiency)
총 입력에 대한 유효 출력의 비율
2 · 파동 및 전기
  • Distance between successive points in phase.
  • At a boundary, frequency stays fixed by the source. A change of speed changes wavelength. Refraction follows from speed differences; angles are measured from the normal.
  • Measure several wavelengths and divide to reduce fractional reading uncertainty. Use a ray box with a normal drawn at the boundary. Keep the beam away from eyes and record incident and refracted angles clearly.
  • Rate of flow of charge.
  • Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
  • Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
  • A quantum of electromagnetic radiation.
  • Use photon energy = Planck constant × frequency. Maximum kinetic energy = photon energy - work function. Increasing intensity at fixed frequency increases photon arrival rate, not individual photon energy.
  • Read axes carefully on a stopping-potential or kinetic-energy graph. Identify threshold frequency from the zero-energy intercept. State the metal and experimental conditions because work function is material-specific.
파장
동위 상을 가진 연속적인 점 사이의 거리
주파수
단위 시간당 진동 수
전류
전하의 흐름 속도
전위차
단위 전하당 전달된 에너지
광자
전자기 복사의 양자
일함수(WORK FUNCTION)
전자를 방출하기 위해 필요한 최소 표면 에너지
3 · 물리 실습 기술 I
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
불확실성
측정 결과에 대한 정량적 제한
계통적 오차
일관된 측정 편향
4 · 추가 역학, 장 및 입자
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
  • Creation of emf by changing flux linkage.
  • Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
  • Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
  • A description of gravitational force per unit mass.
  • For a point mass or outside a spherical mass, field strength follows an inverse-square distance dependence. Use distance from the centre, not height above the surface alone.
  • State the circular-orbit approximation and ignore atmospheric drag only when justified. Draw the force toward the central body and velocity tangential to the orbit. Do not add an outward force merely because the path is circular.
운동량
질량과 속도의 곱
합성력
The vector sum of forces on an object
신입 사원 교육
자속 linkage를 변화시켜 기전력을 생성하는 것
변압기
자속 변화를 통해 코일 간 에너지를 전달하는 장치
중력장(gravitational field)
단위 질량당 중력
집중적 힘
곡선 경로 중심을 향하는 합력
5 · 열역학, 복사, 진동 및 우주론
  • Energy per mass per temperature rise.
  • Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
  • Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
  • Temperature on the kelvin scale.
  • At fixed amount and volume, pressure is proportional to kelvin temperature. At fixed temperature and amount, pressure is inversely proportional to volume. State which quantities are fixed before choosing a relationship.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
  • Time for activity or undecayed population to halve.
  • Subtract background counts measured over the same time interval. Distinguish irradiation from contamination. Shielding, distance and reduced exposure time can reduce risk under a school-controlled procedure.
  • Use teacher-managed sources and the school radiation rules. Record count duration and repeat background measurements. Do not extrapolate a half-life from one nucleus or from uncorrected readings.
  • A large response to periodic forcing near a natural frequency.
  • Velocity is greatest near equilibrium for ideal SHM, while acceleration magnitude is greatest at extreme displacement. Resonance can occur near the natural frequency under periodic driving, with amplitude limited by damping.
  • Measure time for several complete oscillations and divide. Define a cycle consistently and use a small displacement when the model requires it. Keep pendulum paths clear and record damping effects rather than assuming perfect motion.
  • Total emitted power.
  • For isotropic emission without absorption, flux follows an inverse-square relationship with distance. Observed brightness alone therefore cannot establish luminosity.
  • Keep distance units consistent, identify which quantities are intrinsic to the star, and distinguish observational evidence from a model of stellar evolution. Do not confuse a red giant stage with every possible final remnant.
비열 (specific heat capacity)
단위 질량당 단위 온도 상승에 따른 에너지
잠열
상 변화와 관련된 에너지
절대 온도
켈빈 온도계상의 온도
이상 기체
특정 간소화 가정을 가진 기체 모델
반감기
활성도 또는 붕괴하지 않은 개체 수가 반으로 줄어드는 데 걸리는 시간
배경 방사선(background radiation)
조사 대상 소스 외에 측정된 방사선
공명
고유 주파수 근처에서 주기적 외력에 대한 큰 응답(공명)
감쇠
진동계로부터의 에너지 방출(감쇠)
발광도
총 방출 전력
자기 흐름
단위 면적당 수신 전력
6 · 물리 실습 기술 II
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
불확실성
측정 결과에 대한 정량적 제한
계통적 오차
일관된 측정 편향

해당 자격증 대비

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.
  • This package uses the 2018 specification, current for these assessments. Pearson announces first teaching of a redeveloped course from September 2027; do not mix its future content into the current Unit 1–6 route.

여전히 필요한 교육 범위

  • Full material stress/strain, fluid and mechanical statement coverage remains.
  • Full superposition, quantum wave evidence, resistivity/emf and network statements remain.
  • All AS core practicals and written graph/design objectives remain.
  • Circular motion, electric/magnetic field calculations, capacitors and particle physics remain.
  • Full thermodynamic/radiation/stellar objectives remain.
  • Full A2 practical design, transformations and uncertainty analysis remain.

규격 서식 및 표본 문서

과정 자료

수업 준비

문서가 이용 가능합니다. 모든 과정에 대해 보드별 노트, 평가 및 상호작용형 과거 문제집 연습이 제공되지는 않습니다.

수업 →

로그인 또는 계정 만들기

IGCSE, A-Level & AP