본문 바로가기

피어슨 에덱셀 · International A-Level

화학

이 과정의 문제지, 표본 및 커리큘럼 문서입니다.

← 시험

자격 인증 코드: XCH11 / YCH11

최근 과거문제

77 문제지 및 채점 기준 쌍

문제지와 채점 기준 보기 →

핸드아웃, 연습지 및 슬라이드

공유된 주제 문서는 출처 과정 및 주제 제목을 유지합니다. 선택한 보드의 규정을 사용하여 커버리지, tiers 및 고사 요건을 적용하십시오.

교재 자료 · 피어슨 에덱셀 · International A-Level · Chemistry (6)
연습지 · 피어슨 에덱셀 · International A-Level · Chemistry (73)
프레젠테이션 슬라이드 · 피어슨 에덱셀 · International A-Level · Chemistry (6)
연습 walkthrough 슬라이드 · 피어슨 에덱셀 · International A-Level · Chemistry (93)
수업 가이드 · 피어슨 에덱셀 · International A-Level · Chemistry (1)
교재 자료 · A-Level 화학 (37)
연습지 · A-Level 화학 (90)
프레젠테이션 슬라이드 · A-Level 화학 (37)
연습 walkthrough 슬라이드 · A-Level 화학 (165)

과정 단위 및 학습 목표

이 수업은 선택된 과정 목표를 다룹니다. 나머지 미달성 항목을 확인하십시오. 이 자료는 완전한 준비 프로그램이 아닙니다.

1 · 구조, 결합 및 유기화학 도입
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
몰
물질의 양을 나타내는 SI 단위
제한 시약
생성될 수 있는 생성물의 양을 제한하는 반응물
이온 결합
반대 전하를 띤 이온 간의 인력
비국자 전자
특정 원자나 결합에 국한되지 않은 전자
기능기
특징적인 반응을 결정하는 원자 그룹
이성체
동일한 분자식을 가지나 구조가 다른 화합물
2 · 에너지, 원소군 화학, 할로젠알케인 및 알코올
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
발열 반응(exothermic)
에너지가 주변으로 전달됨
엔탈피 변화
특정 과정에서의 일정 압력에서의 열 변화
산화
전자의 손실
환원
전자의 획득
활성화 에너지
반응 경로의 에너지 장벽
비율
단위 시간당 측정량의 변화
기능기
특징적인 반응을 결정하는 원자 그룹
이성체
동일한 분자식을 가지나 구조가 다른 화합물
3 · 화학 실습 기술 I
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
티트(titre)
두 비륨 눈금 사이에서 방출된 부피
등가점
화학양론적 반응이 완료되는 지점
크로마토그래피
두 상을 이용한 분리
Rf
스팟 거리와 용매 전진 거리의 비
불확실성
측정 결과에 대한 정량적 제한
계통적 오차
일관된 측정 편향
4 · 반응 속도, 평형 및 추가 유기화학
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • A state with equal forward and reverse reaction rates.
  • A concentration or pressure change disturbs the balance. The system responds toward a new equilibrium. Temperature changes can also change the equilibrium constant; a catalyst changes how quickly equilibrium is reached.
  • State the balanced equation and whether the forward reaction is exothermic before predicting a temperature effect. Count gas coefficients when considering pressure; pressure has no composition effect when gaseous amounts are equal on both sides.
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
활성화 에너지
반응 경로의 에너지 장벽
비율
단위 시간당 측정량의 변화
평형
정반응 및 역반응 속도가 동일한 상태
가역 반응
양방향으로 진행될 수 있는 반응
발열 반응(exothermic)
에너지가 주변으로 전달됨
엔탈피 변화
특정 과정에서의 일정 압력에서의 열 변화
기능기
특징적인 반응을 결정하는 원자 그룹
이성체
동일한 분자식을 가지나 구조가 다른 화합물
5 · 전이금속 및 유기 질소 화학
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
산화
전자의 손실
환원
전자의 획득
기능기
특징적인 반응을 결정하는 원자 그룹
이성체
동일한 분자식을 가지나 구조가 다른 화합물
크로마토그래피
두 상을 이용한 분리
Rf
스팟 거리와 용매 전진 거리의 비
6 · 물리 실습 기술 II
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
티트(titre)
두 비륨 눈금 사이에서 방출된 부피
등가점
화학양론적 반응이 완료되는 지점
불확실성
측정 결과에 대한 정량적 제한
계통적 오차
일관된 측정 편향

해당 자격증 대비

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.

여전히 필요한 교육 범위

  • Full topic 1–5 statement coverage remains.
  • Intermolecular forces, Groups 1/2/7, halogenoalkanes and alcohol chemistry remain.
  • All AS core practicals, preparation methods and practical-paper objectives remain.
  • Rate equations, entropy, acid-base equilibria, carbonyls/acids/chirality remain.
  • Transition-metal complexes, electrode potentials, organic nitrogen, synthesis and spectroscopy remain.
  • A2 synthesis, purification, quantitative analysis and practical-paper coverage remain.

규격 서식 및 표본 문서

과정 자료

수업 준비

문서가 이용 가능합니다. 모든 과정에 대해 보드별 노트, 평가 및 상호작용형 과거 문제집 연습이 제공되지는 않습니다.

수업 →

로그인 또는 계정 만들기

IGCSE, A-Level & AP