AQA · GCSE
수학
이 과정의 문제지, 표본 및 커리큘럼 문서입니다.
자격 인증 코드: 8300
최근 과거문제
48 문제지 및 채점 기준 쌍
문제지와 채점 기준 보기 →핸드아웃, 연습지 및 슬라이드
공유된 주제 문서는 출처 과정 및 주제 제목을 유지합니다. 선택한 보드의 규정을 사용하여 커버리지, tiers 및 고사 요건을 적용하십시오.
교재 자료 · AQA · GCSE · Mathematics (6)
연습지 · AQA · GCSE · Mathematics (106)
- 1.1 산술, 약수, 배수와 소수 (N1–N4)
- 1.1.1 Primes, factors, HCF and LCM
- 1.1.2 Negative numbers, decimals and ordering
- 1.1.3 Counting outcomes: listing and the product rule
- 1.1.4 Rounding, estimation and error intervals
- 1.1.99 Mixed review: number, Foundation then Higher
- 1.2 분수, 소수, 백분율 및 단위 (N5–N10)
- 1.2.1 Fractions: the four operations
- 1.2.2 Fractions, decimals and percentages; recurring decimals
- 1.2.3 Metric units: length, mass, capacity, area and volume
- 1.2.4 Ratios and fractions: sharing in a ratio
- 1.3 지수, 무리수, 표준형 및 경계 (N11–N16)
- 1.3.1 Index laws and standard form
- 1.3.2 Upper and lower bounds
- 1.3.3 Surds: simplifying and rationalising
- 2.1 표기법, 식, 대입, 전개 및 인수분해 (A1–A4)
- 2.1.1 Forming and solving linear equations
- 2.1.2 Algebraic notation, vocabulary and substitution
- 2.1.3 Collecting, expanding and factorising
- 2.1.4 Identities and algebraic proof
- 2.1.5 대수분수
- 2.1.99 Mixed review: algebra, Foundation then Higher
- 2.2 방정식, 부등식, 공식 및 변형 (A5–A7)
- 2.2.1 Changing the subject of a formula
- 2.2.2 Linear inequalities and number lines
- 2.2.3 Quadratic inequalities and regions
- 2.3 수열, n항 포함 (A24–A25)
- 2.3.1 Arithmetic sequences and the nth term
- 2.3.2 Special sequences: squares, cubes, triangles, Fibonacci and geometric
- 2.3.3 Quadratic sequences
- 2.4 그래프: 일차함수, 이차함수, 역비함수, 실생활 적용 (A8–A16)
- 2.4.1 Straight-line graphs: gradient and equation
- 2.4.2 Function machines
- 2.4.3 Function notation, composite and inverse functions
- 2.4.4 Quadratic, cubic and reciprocal graphs
- 2.4.5 Trigonometric and exponential graphs
- 2.4.6 Transformations of graphs and completing the square
- 2.4.7 Real-life graphs: distance-time, cost and conversion
- 2.4.8 Rates of change and areas under graphs
- 2.4.9 Equations of circles and tangents
- 2.5 이차방정식과 연립방정식 - HT (A17–A23)
- 2.5.1 Solving quadratic equations
- 2.5.2 Simultaneous equations
- 2.5.3 Solving equations by iteration
- 3.1 비례 및 비 (R1–R5)
- 3.1.1 Ratio: simplifying, sharing and combining
- 3.1.2 Scale drawings and maps
- 3.1.3 비례 및 역비례
- 3.1.4 Similar shapes: length, area and volume scale factors
- 3.1.99 Mixed review: ratio and proportion, Foundation then Higher
- 3.2 백분율 변화, 성장 및 감소 (R9–R16)
- 3.2.1 Scale, similarity and growth (cut of 3.2)
- 3.2.2 Percentage change, interest, growth and decay
- 3.2.3 Iterative growth with deposits
- 3.3 복합 단위 및 변화율 (R6–R8, R13–R14)
- 3.3.1 Compound measures: speed, density, pressure and best buys
- 4.1 각, 평행선 및 다각형 (G1–G3)
- 4.1.1 Properties of 2D shapes and symmetry
- 4.1.2 각의 사실, 평행 직선 및 다각형
- 4.1.3 방위각(Bearings)
- 4.1.99 Mixed review: geometry and measures, Foundation then Higher
- 4.2 둘레, 면적 및 부피, 원 포함 (G14–G17, G19)
- 4.2.1 Parts of a circle: chords, tangents and segments
- 4.2.2 3D solids, nets, plans and elevations
- 4.2.3 Perimeter and area of 2D shapes
- 4.2.4 Volume and surface area of prisms and cylinders
- 4.2.5 Circumference and area of circles
- 4.2.6 Spheres, cones, pyramids and frustums
- 4.2.7 Arcs and sectors
- 4.3 피타고라스 정리, 삼각함수 및 그래프 (G6, G20–G24)
- 4.3.1 피타고라스 정리
- 4.3.2 Right-angled trigonometry: SOH CAH TOA
- 4.3.3 삼각함수의 정확한 값
- 4.3.4 Sine rule, cosine rule and area of a triangle
- 4.3.5 3차원에서의 피타고라스와 삼각함수학
- 4.4 변환, 작도, 자취선 및 벡터 (G7–G10, G25)
- 4.4.1 Column vectors
- 4.4.2 Transformations: reflection, rotation, translation and enlargement
- 4.4.3 Constructions and loci
- 4.4.4 Coordinate geometry: midpoints, lengths, gradients and perpendicular lines
- 4.4.5 Combined transformations and invariant points
- 4.4.6 Vector geometry proofs
- 4.5 성질, 합동 및 유사 (G4–G5, G18)
- 4.5.1 원주 정리
- 4.5.2 Congruent triangles and proof
- 4.5.3 Proving circle theorems
- 4.5.4 Tangents, kites and the alternate segment
- 5.1 확률 기초 및 표 (P1–P6)
- 5.1.1 Probability and tree diagrams
- 5.1.2 Relative frequency and expected outcomes
- 5.1.3 Sample spaces and the product rule
- 5.1.99 Mixed review: probability, Foundation then Higher
- 5.2 나무 그림 및 집합 - HT (P7–P9)
- 5.2.1 Venn diagrams, two-way tables and frequency trees
- 5.2.2 조건부 확률
- 6.1 표본 추출, 평균 및 분산 (S1–S4)
- 6.1.1 평균 및 범위
- 6.1.2 Cumulative frequency and box plots
- 6.1.3 Populations, samples and bias
- 6.1.4 Frequency tables and grouped data
- 6.1.5 Comparing distributions with box plots
- 6.1.99 Mixed review: statistics, Foundation then Higher
- 6.2 그래프, 표, 시계열 및 산점도 (S2, S5–S6)
- 6.2.1 Pie charts, time series and choosing displays
- 6.2.2 Scatter graphs and correlation
- 6.2.3 Histograms with unequal class widths
프레젠테이션 슬라이드 · AQA · GCSE · Mathematics (6)
연습 walkthrough 슬라이드 · AQA · GCSE · Mathematics (111)
- 1.1 산술, 약수, 배수와 소수 (N1–N4) · Walk-through
- 1.1 산술, 약수, 배수와 소수 (N1–N4) · Past-paper walk-through
- 1.1.1 Primes, factors, HCF and LCM · Walk-through
- 1.1.2 Negative numbers, decimals and ordering · Walk-through
- 1.1.3 Counting outcomes: listing and the product rule · Walk-through
- 1.1.4 Rounding, estimation and error intervals · Walk-through
- 1.1.99 Mixed review: number, Foundation then Higher · Walk-through
- 1.2 분수, 소수, 백분율 및 단위 (N5–N10) · Walk-through
- 1.2 분수, 소수, 백분율 및 단위 (N5–N10) · Past-paper walk-through
- 1.2.1 Fractions: the four operations · Walk-through
- 1.2.2 Fractions, decimals and percentages; recurring decimals · Walk-through
- 1.2.3 Metric units: length, mass, capacity, area and volume · Walk-through
- 1.2.4 Ratios and fractions: sharing in a ratio · Walk-through
- 1.3 지수, 무리수, 표준형 및 경계 (N11–N16) · Walk-through
- 1.3 지수, 무리수, 표준형 및 경계 (N11–N16) · Past-paper walk-through
- 1.3.1 Index laws and standard form · Walk-through
- 1.3.2 Upper and lower bounds · Walk-through
- 1.3.3 Surds: simplifying and rationalising · Walk-through
- 2.1 표기법, 식, 대입, 전개 및 인수분해 (A1–A4) · Walk-through
- 2.1.1 Forming and solving linear equations · Walk-through
- 2.1.2 Algebraic notation, vocabulary and substitution · Walk-through
- 2.1.3 Collecting, expanding and factorising · Walk-through
- 2.1.4 Identities and algebraic proof · Walk-through
- 2.1.5 대수분수 · Walk-through
- 2.1.99 Mixed review: algebra, Foundation then Higher · Walk-through
- 2.2 방정식, 부등식, 공식 및 변형 (A5–A7) · Walk-through
- 2.2.1 Changing the subject of a formula · Walk-through
- 2.2.2 Linear inequalities and number lines · Walk-through
- 2.2.3 Quadratic inequalities and regions · Walk-through
- 2.3 수열, n항 포함 (A24–A25) · Walk-through
- 2.3.1 Arithmetic sequences and the nth term · Walk-through
- 2.3.2 Special sequences: squares, cubes, triangles, Fibonacci and geometric · Walk-through
- 2.3.3 Quadratic sequences · Walk-through
- 2.4 그래프: 일차함수, 이차함수, 역비함수, 실생활 적용 (A8–A16) · Walk-through
- 2.4.1 Straight-line graphs: gradient and equation · Walk-through
- 2.4.2 Function machines · Walk-through
- 2.4.3 Function notation, composite and inverse functions · Walk-through
- 2.4.4 Quadratic, cubic and reciprocal graphs · Walk-through
- 2.4.5 Trigonometric and exponential graphs · Walk-through
- 2.4.6 Transformations of graphs and completing the square · Walk-through
- 2.4.7 Real-life graphs: distance-time, cost and conversion · Walk-through
- 2.4.8 Rates of change and areas under graphs · Walk-through
- 2.4.9 Equations of circles and tangents · Walk-through
- 2.5 이차방정식과 연립방정식 - HT (A17–A23) · Walk-through
- 2.5.1 Solving quadratic equations · Walk-through
- 2.5.2 Simultaneous equations · Walk-through
- 2.5.3 Solving equations by iteration · Walk-through
- 3.1 비례 및 비 (R1–R5) · Walk-through
- 3.1.1 Ratio: simplifying, sharing and combining · Walk-through
- 3.1.2 Scale drawings and maps · Walk-through
- 3.1.3 비례 및 역비례 · Walk-through
- 3.1.4 Similar shapes: length, area and volume scale factors · Walk-through
- 3.1.90 Foundation ratio and percentage — partial authentic practice · Past-paper walk-through
- 3.1.99 Mixed review: ratio and proportion, Foundation then Higher · Walk-through
- 3.2 백분율 변화, 성장 및 감소 (R9–R16) · Walk-through
- 3.2.1 Scale, similarity and growth (cut of 3.2) · Walk-through
- 3.2.2 Percentage change, interest, growth and decay · Walk-through
- 3.2.3 Iterative growth with deposits · Walk-through
- 3.3 복합 단위 및 변화율 (R6–R8, R13–R14) · Walk-through
- 3.3.1 Compound measures: speed, density, pressure and best buys · Walk-through
- 4.1 각, 평행선 및 다각형 (G1–G3) · Walk-through
- 4.1.1 Properties of 2D shapes and symmetry · Walk-through
- 4.1.2 각의 사실, 평행 직선 및 다각형 · Walk-through
- 4.1.3 방위각(Bearings) · Walk-through
- 4.1.99 Mixed review: geometry and measures, Foundation then Higher · Walk-through
- 4.2 둘레, 면적 및 부피, 원 포함 (G14–G17, G19) · Walk-through
- 4.2.1 Parts of a circle: chords, tangents and segments · Walk-through
- 4.2.2 3D solids, nets, plans and elevations · Walk-through
- 4.2.3 Perimeter and area of 2D shapes · Walk-through
- 4.2.4 Volume and surface area of prisms and cylinders · Walk-through
- 4.2.5 Circumference and area of circles · Walk-through
- 4.2.6 Spheres, cones, pyramids and frustums · Walk-through
- 4.2.7 Arcs and sectors · Walk-through
- 4.3 피타고라스 정리, 삼각함수 및 그래프 (G6, G20–G24) · Walk-through
- 4.3.1 피타고라스 정리 · Walk-through
- 4.3.2 Right-angled trigonometry: SOH CAH TOA · Walk-through
- 4.3.3 삼각함수의 정확한 값 · Walk-through
- 4.3.4 Sine rule, cosine rule and area of a triangle · Walk-through
- 4.3.5 3차원에서의 피타고라스와 삼각함수학 · Walk-through
- 4.4 변환, 작도, 자취선 및 벡터 (G7–G10, G25) · Walk-through
- 4.4.1 Column vectors · Walk-through
- 4.4.2 Transformations: reflection, rotation, translation and enlargement · Walk-through
- 4.4.3 Constructions and loci · Walk-through
- 4.4.4 Coordinate geometry: midpoints, lengths, gradients and perpendicular lines · Walk-through
- 4.4.5 Combined transformations and invariant points · Walk-through
- 4.4.6 Vector geometry proofs · Walk-through
- 4.5 성질, 합동 및 유사 (G4–G5, G18) · Walk-through
- 4.5.1 원주 정리 · Walk-through
- 4.5.2 Congruent triangles and proof · Walk-through
- 4.5.3 Proving circle theorems · Walk-through
- 4.5.4 Tangents, kites and the alternate segment · Walk-through
- 5.1 확률 기초 및 표 (P1–P6) · Walk-through
- 5.1.1 Probability and tree diagrams · Walk-through
- 5.1.2 Relative frequency and expected outcomes · Walk-through
- 5.1.3 Sample spaces and the product rule · Walk-through
- 5.1.90 Foundation sample spaces — partial authentic practice · Past-paper walk-through
- 5.1.99 Mixed review: probability, Foundation then Higher · Walk-through
- 5.2 나무 그림 및 집합 - HT (P7–P9) · Walk-through
- 5.2.1 Venn diagrams, two-way tables and frequency trees · Walk-through
- 5.2.2 조건부 확률 · Walk-through
- 6.1 표본 추출, 평균 및 분산 (S1–S4) · Walk-through
- 6.1.1 평균 및 범위 · Walk-through
- 6.1.2 Cumulative frequency and box plots · Walk-through
- 6.1.3 Populations, samples and bias · Walk-through
- 6.1.4 Frequency tables and grouped data · Walk-through
- 6.1.5 Comparing distributions with box plots · Walk-through
- 6.1.99 Mixed review: statistics, Foundation then Higher · Walk-through
- 6.2 그래프, 표, 시계열 및 산점도 (S2, S5–S6) · Walk-through
- 6.2.1 Pie charts, time series and choosing displays · Walk-through
- 6.2.2 Scatter graphs and correlation · Walk-through
- 6.2.3 Histograms with unequal class widths · Walk-through
교재 자료 · IGCSE 수학 (9)
연습지 · IGCSE 수학 (125)
- C1.1 숫자의 종류
- C1.2 집합(sets)
- C1.3 지수 및 근
- C1.4 분수, 소수 및 백분율
- C1.5 순서
- C1.6 네 가지 연산
- C1.7 지수 I
- C1.8 표준형(standard form)
- C1.9 예측
- C1.10 정확도의 한계
- C1.11 비례 및 비
- C1.12 율
- C1.13 백분율(Percentages)
- C1.14 계산기 사용법
- C1.15 시간
- C1.16 자금
- C2.1 대수학 입문
- C2.2 대수적 변형
- C2.4 지수 II
- C2.5 방정식
- C2.6 부등식
- C2.7 수열
- C2.9 실생활에서의 그래프
- C2.10 함수의 그래프
- C2.11 곡선 스케치
- C3.1 좌표
- C3.2 일차 함수 그래프 그리기
- C3.3 일차 함수 그래프의 기울기
- C3.5 일차 함수 그래프의 방정식
- C3.6 평행 직선
- C4.1 기하학적 용어
- C4.2 기하학적 작도
- C4.3 비례 도면
- C4.4 비슷함
- C4.5 대칭
- C4.6 각도
- C4.7 원주 정리
- C5.1 단위 및 측정
- C5.2 면적과 둘레
- C5.3 원, 호 및 부채꼴
- C5.4 표면적과 부피
- C5.5 합성 도형과 도형의 일부
- C6.1 피타고라스 정리
- C6.2 직각삼각형
- C7.1 변환
- C8.1 확률론 introduction
- C8.2 상대빈도와 기대빈도
- C8.3 결합 사건의 확률
- C9.1 통계 데이터 분류
- C9.2 통계 데이터 해석
- C9.3 평균 및 범위
- C9.4 통계 차트 및 도표
- C9.5 산점도
- E1.1 숫자의 종류
- E1.2 집합(sets)
- E1.3 지수 및 근
- E1.4 분수, 소수 및 백분율
- E1.5 순서
- E1.6 네 가지 연산
- E1.7 지수 I
- E1.8 표준형(standard form)
- E1.9 예측
- E1.10 정확도의 한계
- E1.11 비례 및 비
- E1.12 율
- E1.13 백분율(Percentages)
- E1.14 계산기 사용법
- E1.15 시간
- E1.16 자금
- E1.17 지수 성장 및 감소(Exponential growth and decay)
- E1.18 근호(Surds)
- E2.1 대수학 입문
- E2.2 대수적 변형
- E2.3 대수분수
- E2.4 지수 II
- E2.5 방정식
- E2.6 부등식
- E2.7 수열
- E2.8 비율
- E2.9 실생활에서의 그래프
- E2.10 함수의 그래프
- E2.11 곡선 스케치
- E2.12 미분
- E2.13 함수
- E3.1 좌표
- E3.2 일차 함수 그래프 그리기
- E3.3 일차 함수 그래프의 기울기
- E3.4 길이와 중점
- E3.5 일차 함수 그래프의 방정식
- E3.6 평행 직선
- E3.7 수직선
- E4.1 기하학적 용어
- E4.2 기하학적 작도
- E4.3 비례 도면
- E4.4 비슷함
- E4.5 대칭
- E4.6 각도
- E4.7 원주 정리 I
- E4.8 원주 정리 II
- E5.1 단위 및 측정
- E5.2 면적과 둘레
- E5.3 원, 호 및 부채꼴
- E5.4 표면적과 부피
- E5.5 합성 도형과 도형의 일부
- E6.1 피타고라스 정리
- E6.2 직각삼각형
- E6.3 삼각함수의 정확한 값
- E6.4 삼각함수
- E6.5 비직각 삼각형
- E6.6 3D에서의 피타고라스 정리 및 삼각함수
- E7.1 변환
- E7.2 2차원 벡터
- E7.3 벡터의 크기
- E7.4 벡터 기하학(vector geometry)
- E8.1 확률론 introduction
- E8.2 상대빈도와 기대빈도
- E8.3 결합 사건의 확률
- E8.4 조건부 확률
- E9.1 통계 데이터 분류
- E9.2 통계 데이터 해석
- E9.3 평균 및 산포 지수
- E9.4 통계 차트 및 도표
- E9.5 산점도
- E9.6 누적 빈도 도표
- E9.7 히스토그램
프레젠테이션 슬라이드 · IGCSE 수학 (9)
연습 walkthrough 슬라이드 · IGCSE 수학 (158)
- C1.1 숫자의 종류 · Walk-through
- C1.2 집합(sets) · Walk-through
- C1.3 지수 및 근 · Walk-through
- C1.4 분수, 소수 및 백분율 · Walk-through
- C1.5 순서 · Walk-through
- C1.6 네 가지 연산 · Walk-through
- C1.7 지수 I · Walk-through
- C1.8 표준형(standard form) · Walk-through
- C1.9 예측 · Walk-through
- C1.10 정확도의 한계 · Walk-through
- C1.11 비례 및 비 · Walk-through
- C1.12 율 · Walk-through
- C1.13 백분율(Percentages) · Walk-through
- C1.14 계산기 사용법 · Walk-through
- C1.15 시간 · Walk-through
- C1.16 자금 · Walk-through
- C2.1 대수학 입문 · Walk-through
- C2.2 대수적 변형 · Walk-through
- C2.4 지수 II · Walk-through
- C2.5 방정식 · Walk-through
- C2.6 부등식 · Walk-through
- C2.7 수열 · Walk-through
- C2.9 실생활에서의 그래프 · Walk-through
- C2.10 함수의 그래프 · Walk-through
- C2.11 곡선 스케치 · Walk-through
- C3.1 좌표 · Walk-through
- C3.2 일차 함수 그래프 그리기 · Walk-through
- C3.3 일차 함수 그래프의 기울기 · Walk-through
- C3.5 일차 함수 그래프의 방정식 · Walk-through
- C3.6 평행 직선 · Walk-through
- C4.1 기하학적 용어 · Walk-through
- C4.2 기하학적 작도 · Walk-through
- C4.3 비례 도면 · Walk-through
- C4.4 비슷함 · Walk-through
- C4.5 대칭 · Walk-through
- C4.6 각도 · Walk-through
- C4.7 원주 정리 · Walk-through
- C5.1 단위 및 측정 · Walk-through
- C5.2 면적과 둘레 · Walk-through
- C5.3 원, 호 및 부채꼴 · Walk-through
- C5.4 표면적과 부피 · Walk-through
- C5.5 합성 도형과 도형의 일부 · Walk-through
- C6.1 피타고라스 정리 · Walk-through
- C6.2 직각삼각형 · Walk-through
- C7.1 변환 · Walk-through
- C8.1 확률론 introduction · Walk-through
- C8.2 상대빈도와 기대빈도 · Walk-through
- C8.3 결합 사건의 확률 · Walk-through
- C9.1 통계 데이터 분류 · Walk-through
- C9.2 통계 데이터 해석 · Walk-through
- C9.3 평균 및 범위 · Walk-through
- C9.4 통계 차트 및 도표 · Walk-through
- C9.5 산점도 · Walk-through
- E1.1 숫자의 종류 · Walk-through
- E1.1 숫자의 종류 · Past-paper walk-through
- E1.2 집합(sets) · Walk-through
- E1.2 집합(sets) · Past-paper walk-through
- E1.3 지수 및 근 · Walk-through
- E1.3 지수 및 근 · Past-paper walk-through
- E1.4 분수, 소수 및 백분율 · Walk-through
- E1.4 분수, 소수 및 백분율 · Past-paper walk-through
- E1.5 순서 · Walk-through
- E1.6 네 가지 연산 · Walk-through
- E1.7 지수 I · Walk-through
- E1.7 지수 I · Past-paper walk-through
- E1.8 표준형(standard form) · Walk-through
- E1.8 표준형(standard form) · Past-paper walk-through
- E1.9 예측 · Walk-through
- E1.10 정확도의 한계 · Walk-through
- E1.10 정확도의 한계 · Past-paper walk-through
- E1.11 비례 및 비 · Walk-through
- E1.12 율 · Walk-through
- E1.12 율 · Past-paper walk-through
- E1.13 백분율(Percentages) · Walk-through
- E1.14 계산기 사용법 · Walk-through
- E1.15 시간 · Walk-through
- E1.16 자금 · Walk-through
- E1.17 지수 성장 및 감소(Exponential growth and decay) · Walk-through
- E1.18 근호(Surds) · Walk-through
- E2.1 대수학 입문 · Walk-through
- E2.1 대수학 입문 · Past-paper walk-through
- E2.2 대수적 변형 · Walk-through
- E2.2 대수적 변형 · Past-paper walk-through
- E2.3 대수분수 · Walk-through
- E2.4 지수 II · Walk-through
- E2.4 지수 II · Past-paper walk-through
- E2.5 방정식 · Walk-through
- E2.5 방정식 · Past-paper walk-through
- E2.6 부등식 · Walk-through
- E2.6 부등식 · Past-paper walk-through
- E2.7 수열 · Walk-through
- E2.8 비율 · Walk-through
- E2.9 실생활에서의 그래프 · Walk-through
- E2.10 함수의 그래프 · Walk-through
- E2.10 함수의 그래프 · Past-paper walk-through
- E2.11 곡선 스케치 · Walk-through
- E2.11 곡선 스케치 · Past-paper walk-through
- E2.12 미분 · Walk-through
- E2.13 함수 · Walk-through
- E3.1 좌표 · Walk-through
- E3.1 좌표 · Past-paper walk-through
- E3.2 일차 함수 그래프 그리기 · Walk-through
- E3.2 일차 함수 그래프 그리기 · Past-paper walk-through
- E3.3 일차 함수 그래프의 기울기 · Walk-through
- E3.4 길이와 중점 · Walk-through
- E3.5 일차 함수 그래프의 방정식 · Walk-through
- E3.6 평행 직선 · Walk-through
- E3.7 수직선 · Walk-through
- E4.1 기하학적 용어 · Walk-through
- E4.2 기하학적 작도 · Walk-through
- E4.2 기하학적 작도 · Past-paper walk-through
- E4.3 비례 도면 · Walk-through
- E4.4 비슷함 · Walk-through
- E4.4 비슷함 · Past-paper walk-through
- E4.5 대칭 · Walk-through
- E4.6 각도 · Walk-through
- E4.6 각도 · Past-paper walk-through
- E4.7 원주 정리 I · Walk-through
- E4.7 원주 정리 I · Past-paper walk-through
- E4.8 원주 정리 II · Walk-through
- E5.1 단위 및 측정 · Walk-through
- E5.2 면적과 둘레 · Walk-through
- E5.3 원, 호 및 부채꼴 · Walk-through
- E5.3 원, 호 및 부채꼴 · Past-paper walk-through
- E5.4 표면적과 부피 · Walk-through
- E5.4 표면적과 부피 · Past-paper walk-through
- E5.5 합성 도형과 도형의 일부 · Walk-through
- E6.1 피타고라스 정리 · Walk-through
- E6.1 피타고라스 정리 · Past-paper walk-through
- E6.2 직각삼각형 · Walk-through
- E6.2 직각삼각형 · Past-paper walk-through
- E6.3 삼각함수의 정확한 값 · Walk-through
- E6.4 삼각함수 · Walk-through
- E6.4 삼각함수 · Past-paper walk-through
- E6.5 비직각 삼각형 · Walk-through
- E6.6 3D에서의 피타고라스 정리 및 삼각함수 · Walk-through
- E7.1 변환 · Walk-through
- E7.1 변환 · Past-paper walk-through
- E7.2 2차원 벡터 · Walk-through
- E7.2 2차원 벡터 · Past-paper walk-through
- E7.3 벡터의 크기 · Walk-through
- E7.4 벡터 기하학(vector geometry) · Walk-through
- E8.1 확률론 introduction · Walk-through
- E8.1 확률론 introduction · Past-paper walk-through
- E8.2 상대빈도와 기대빈도 · Walk-through
- E8.3 결합 사건의 확률 · Walk-through
- E8.4 조건부 확률 · Walk-through
- E8.4 조건부 확률 · Past-paper walk-through
- E9.1 통계 데이터 분류 · Walk-through
- E9.2 통계 데이터 해석 · Walk-through
- E9.2 통계 데이터 해석 · Past-paper walk-through
- E9.3 평균 및 산포 지수 · Walk-through
- E9.4 통계 차트 및 도표 · Walk-through
- E9.4 통계 차트 및 도표 · Past-paper walk-through
- E9.5 산점도 · Walk-through
- E9.6 누적 빈도 도표 · Walk-through
- E9.6 누적 빈도 도표 · Past-paper walk-through
- E9.7 히스토그램 · Walk-through
과정 단위 및 학습 목표
이 수업은 선택된 과정 목표를 다룹니다. 나머지 미달성 항목을 확인하십시오. 이 자료는 완전한 준비 프로그램이 아닙니다.
3.1 · 숫자
- Exact arithmetic and estimation: A prime number that divides the integer exactly.
- Indices, surds and standard form: The power to which a base is raised.
- Accuracy, bounds and compound measures: The smallest possible value consistent with a stated rounding rule.
- Signed numbers, place value and operation order: A number that multiplies a nonzero original number to give 1.
- Exact fractions and mixed-number operations: A fraction whose numerator is at least as large as its positive denominator.
- Systematic lists and the product rule: A list made in a fixed order so every allowed outcome appears exactly once.
- Exact surds and rationalising denominators: An irrational root kept in exact form rather than replaced by a rounded decimal.
- Terminating and recurring decimal conversions: A decimal with a digit or block of digits that repeats forever.
- Metric and compound-unit conversions: The multiplier that expresses the same quantity in another unit.
- Estimation, rounding and simple error intervals: A digit counted from the first nonzero digit when reporting numerical precision.
- Ratio shares and fraction operators: A comparison that states the relative numbers of equal-sized parts.
- 소인수
- 정수를 정확히 나누는 소수.
- 색인
- 밑수가 취하는 지수.
- 하한
- 명시된 반올림 규칙과 일치하는 가장 작은 값.
- 역수
- 제로가 아닌 원본 수에 곱하여 1이 되는 수
- 거짓분수
- 분모의 양수 값보다 분자가 크거나 같은 분수.
- 체계적 목록
- 고정된 순서로 나열하여 허용되는 모든 결과가 정확히 한 번씩 나타나는 나열.
- 루트(근호)
- 반올림된 소수로 대체하지 않고 정확한 형태로 유지된 무리근.
- 순환소수
- 무한히 반복되는 한 자릿수 또는 일련의 숫자를 포함하는 소수.
- 변환 계수
- 동일한 양을 다른 단위로 나타내는 배율.
- 유효숫자
- 수치 정밀도를 표기할 때 첫 번째 제로가 아닌 숫자로부터 세는 자릿수
- 비율
- 동일한 크기의 부분들의 상대적 수를 명시하는 비교.
3.2 · 대수학
- Equations, identities and rearrangement: An equality that holds for every allowed value of its variable.
- Quadratics and inequalities: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.
- Simultaneous equations and feasible regions: Combining equations to remove one variable while retaining the same solutions.
- Coordinate geometry and tangents: The change in y divided by the corresponding change in x.
- Sequences, series and recurrence: The constant multiplier between consecutive terms of a geometric sequence.
- Algebraic notation, substitution and vocabulary: The numerical factor multiplying a variable term.
- Collecting, expanding and factorising expressions: Rewrite an expression as a product of factors.
- Rearranging formulae and checking the subject: The quantity written alone on one side of a formula.
- Identities, equivalence and algebraic arguments: An expression with the same value as another for every allowed input.
- Function machines and reversing operations: The value supplied to a rule before its operations are carried out.
- Domains, inverses and composition: The set of allowed inputs to a function.
- Coordinate quadrants and basic graph families: A line approached by a graph without a finite crossing in the stated example.
- Exponential and degree-based trigonometric graphs: The input interval after which a repeating graph has the same values again.
- Translations and reflections of function graphs: Move every point of a graph by the same horizontal and vertical displacement.
- Distance-time graphs and contextual intersections: Not changing position over the time interval described.
- Graphical gradients and area estimates: The slope of a tangent, used to estimate a curve’s rate at one input.
- Origin-centred circles and tangent equations: The slope of a radius joining the centre to a point on the circle.
- Numerical iteration for equation roots: Repeat a rule, using the previous output as the next input.
- Linear inequalities and number-line solutions: All inputs that satisfy the stated condition.
- Quadratic inequalities and two-variable regions: The equality line separating values that satisfy an inequality from those that do not.
- Figurate, geometric and Fibonacci-type sequences: A rule that generates new terms from preceding terms.
- Quadratic nth terms and surd-ratio progressions: The difference between consecutive first differences of a sequence.
- Algebraic fractions and excluded values: An input for which an original denominator or divisor is zero.
- 정체성
- 변수의 모든 허용값에 대해 성립하는 등식
- 판별식
- ax²+bx+c=0의 실근을 결정하는 양 b²-4ac
- 탈출(elimination)
- 같은 해를 유지하면서 한 변수를 제거하기 위해 방정식을 결합함
- 기울기
- y의 변화량을 해당 x의 변화량으로 나눈 값
- common ratio(등비)
- 기하 수열에서 연속된 항 사이의 상수 곱셈 인자
- 계수
- 변수 항에 해지는 수치 계수
- 인수분해
- 식을 인수의 곱으로 재작성
- 주제
- 공식의 한쪽에 단독으로 적힌 양
- 등가 표현식
- 모든 허용된 입력에 대해 다른 식과 동일한 값을 가지는 식
- 입력(input)
- 연산이 수행되기 전에 규칙에 공급되는 값
- 정의역
- 함수에 주입할 수 있는 허용된 입력값의 집합.
- 점근선
- 주어진 예에서 유한한 교점을 가지지 않고 그래프가 접근하는 직선
- 주기
- 반복되는 그래프가 다시 같은 값을 나타내는 이후의 입력 구간
- 그래프 평행 이동
- 그래프의 모든 점을 동일한 수평 및 수직 변위만큼 이동
- 정지함
- 지정된 시간 구간에 걸쳐 위치를 변경하지 않음
- 접선의 기울기
- 접선의 기울기, 특정 입력에서의 곡선 변화율을 추정하는 데 사용
- 반지름의 기울기
- 원점과 원 위의 한 점을 연결하는 반경의 기울기
- 반복(iteration)
- 이전 출력물을 다음 입력값으로 사용하여 규칙을 반복 적용
- 해 집합
- 지정된 조건을 만족하는 모든 입력값
- 경계 선
- 부등식을 만족하는 값과 그렇지 않은 값을 구분하는 등호 선
- 재귀 규칙
- 이전 항으로부터 새로운 항을 생성하는 규칙
- 2계 차분(이차 미분량)을 가집니다.
- 수열의 연속된 일계차 사이의 차이.
- 제외 값
- 원분모나 나눗셈의 제로가 되는 입력값
3.3 · 비율, 비례 및 변화율
- Percentages, ratio and proportional reasoning: A factor that performs a percentage change in one multiplication.
- Regression, financial models and residuals: The observed value minus the value predicted by a fitted model.
- Ratios, equivalent proportions and mixtures: A comparison of one share with the combined quantity.
- Scale drawings and maps: The ratio of a drawing length to its corresponding real length.
- Direct and inverse proportional relationships: The fixed multiplier in a stated proportional relationship.
- Rates, unit prices, density and pressure: Mass per unit volume, with both units stated.
- Length, area and volume scale factors: The squared length factor between similar shapes.
- Simple interest, compound growth and decay: Interest calculated on the updated balance each period.
- Iterative processes with repeated deposits: A rule obtaining a later value from the preceding value.
- 승수(multiplier) 때문이기 때문입니다.
- 한 번의 곱셈으로 특정 비율 변화를 수행하는 인자.
- 잔차
- 관측값에서 적합된 모델이 예측한 값을 뺀 값
- 부분 전체 비율
- 한 부분의 양과 전체의 양을 비교함.
- 스케일(scale)
- 도면상의 길이에 대응하는 실제 길이의 비율.
- 비례 상수
- 명시된 비례 관계에 있는 고정 곱하기 인자.
- 밀도
- 두 단위가 모두 명시된 부피 단위당 질량.
- 면적 확대 배율
- 유사한 도형 사이의 제곱된 길이 인자.
- 복리
- 각 기간마다 갱신된 잔액을 기준으로 계산된 이자.
- 재귀 관계
- 이전 값으로부터 이후 값을 구하는 규칙.
3.4 · 기하학 및 측정
- Angle reasoning, similarity and mensuration: The multiplier that relates corresponding lengths in similar shapes.
- Right triangles and non-right triangles: The side opposite the right angle in a right-angled triangle.
- Vectors and transformation geometry: The vector sum representing the combined displacement or force.
- Reflections, rotations and enlargements: The point from which each point's displacement is multiplied by a scale factor.
- Constructions, loci and geometric conditions: The set of all points satisfying a stated geometric condition.
- Circle theorems and reasoned proofs: A quadrilateral whose four vertices lie on one circle.
- Shape vocabulary, properties and symmetry: A mirror line that maps a whole shape onto itself.
- Angle facts and polygon reasoning: Angles in matching positions at a transversal crossing two lines.
- Triangle congruence and geometric proof: Equal shape and size, with matching lengths and angles.
- Circle parts and geometric definitions: A region bounded by a chord and its corresponding arc.
- Geometric reasoning on coordinate axes: The point halfway between the endpoints of a segment.
- Solid properties, plans and elevations: An orthographic view from a stated horizontal direction.
- Measuring angles and three-figure bearings: A direction measured clockwise from north at the starting point.
- Combined isometries and invariants: A property preserved by a specified transformation.
- Circle angles and proof chains: An angle formed by two radii meeting at the centre.
- Tangents, chords and the alternate segment: The tangent–chord angle equals the angle subtended by that chord in the opposite segment.
- Areas, perimeters and composite plane shapes: The distance between a base and its parallel opposite level, measured at right angles.
- Prism volume and cylinder measurement: A slice perpendicular to a prism’s length that remains constant along it.
- Circle lengths, areas and composite boundaries: The total length of a circle’s boundary.
- Spheres, cones, pyramids and frustums: The remaining solid after a cone or pyramid is cut parallel to its base.
- Arcs, sectors and reverse angle calculations: A circle region bounded by two radii and their intervening arc.
- Exact trigonometric values from special triangles: A value retained as a fraction or surd rather than a rounded decimal.
- Sine rule, cosine rule and triangle area: The angle between the two named sides.
- Right triangles in three-dimensional shapes: The view or component of a spatial length on a selected plane.
- Vector geometry and midpoint arguments: Lying on one straight line.
- 스케일링 인자
- 비슷한 도형의 대응 길이를 연결하는 비례 계수.
- 기하변
- 직각삼각형에서 직각과 맞닿은 변의 대변인 변.
- 합성
- 합성 변위나 합력을 나타내는 벡터의 합.
- 확장 중심점
- 모든 점의 변위에 확대 배율을 적용하는 기준점.
- 소속감
- 특정 기하학적 조건을 만족하는 모든 점들의 집합.
- 원주사각형
- 네 꼭짓점이 하나의 원 위에 있는 사각형.
- 대칭축
- 전체 도형을 자신 위에 매핑하는 대칭선.
- 대응각
- 두 직선을 가로지르는 선상에서 동일한 위치에 있는 각도.
- 합동(전등)
- 모양과 크기가 같으며, 대응하는 변과 각도를 가짐.
- 세그먼트(시장 구분)
- 현과 그에 대응하는 호로 둘러싸인 영역.
- 중점
- 선분의 양 끝점 사이 중간 지점.
- 측면도
- 지정된 수평 방향에서의 정사영 도면.
- 방향
- 시작점에서 북쪽을 기준으로 시계 방향으로 측정한 방향.
- 불변
- 특정 변환에 의해 보존되는 성질.
- 원심각
- 원심에서 만나는 두 반지름이 이루는 각도.
- 호각 정리
- 접선과 현 사이의 각도는 반대 변의 원주각과 같다.
- 수직 높이
- 밑면과 평행한 상단 면 사이의 수직 거리.
- 단면
- 기둥의 길이에 수직인 단면으로, 이를 따라 일정하게 유지된다.
- 둘레
- 원의 둘레의 총 길이.
- 단면 원뿔
- 원추나 삼뿔을 밑면에 평행하게 잘랐을 때 남는 입체 도형.
- 부문
- 두 반지름과 그 사이 호로 둘러싸인 원의 영역.
- 정확한 값
- 반올림된 소수 대신 분수나 무리수 형태로 유지되는 값.
- 포함 각
- 두 tên된 변 사이의 각도.
- 투영
- 선택된 평면 위에서의 공간적 길이의 투영 또는 성분.
- 일직선상의 점
- 한 직선 위에 위치함.
3.5 · 확률
- Probability, trees and conditional reasoning: The probability of an event after restricting the sample space to a stated condition.
- Experimental probability, fairness and expected outcomes: The observed count of an outcome divided by the number of trials.
- Systematic possibilities and equally likely outcomes: The complete set of outcomes in an experiment.
- Venn diagrams, unions and two-way counts: The outcomes belonging to both named sets.
- Conditional probability with tables and expected frequencies: A probability within the group selected by given information.
- 조건부 확률
- 주어진 정보에 의해 선택된 그룹 내의 확률.
- 상대 빈도
- 관측된 사건 횟수를 시행 횟수로 나눈 값.
- 표본 공간
- 실험의 모든 결과를 포함하는 집합.
- 교차점
- 두 tên된 집합 모두에 속하는 결과.
3.6 · 통계학
- Data summaries, histograms and interpretation: Frequency divided by class width, used as histogram height.
- Cumulative frequency and box plots: The difference between the upper and lower quartiles.
- Samples, populations and justified comparisons: The complete group about which a statistical claim is made.
- Choosing displays, pie charts and time series: Measurements recorded in time order.
- Frequency summaries and grouped estimates: The class interval containing the greatest frequency.
- Scatter graphs, correlation and cautious predictions: A pattern of association between two measured variables.
- Histogram density and cumulative-frequency construction: Frequency divided by class width, used as histogram height.
- Quartiles, box plots and distribution comparisons: The upper quartile minus the lower quartile.
- 빈도 밀도
- 히스토그램의 높이에 사용되는 빈도를 구간 너비로 나눈 값.
- 사분위 범위
- 상단 사분위수에서 하단 사분위수를 뺀 값.
- 인구
- 통계적 주장을 내리는 전체 집합.
- 시계열
- 시간 순서로 기록된 측정값.
- 빈도 최빈계급
- 가장 높은 주파수를 포함하는 계급 구간.
- 상관관계
- 두 측정 변수 간의 연관 패턴.
해당 자격증 대비
- Choose one tier for all three papers. Foundation targets grades 1–5; Higher targets grades 4–9, with a possible grade 3 award.
- The full formula sheet is supplied for 2026 and 2027; use the correct tier and year. The September 2026 notice also confirms continued provision from 2028 for this specification.
여전히 필요한 교육 범위
- Official question-bank boundaries, scheme alignment and all objective-level teaching coverage require the recorded review; no practice registry promotion.
- The authored diagnostic assessments are not full-length qualification mocks.
규격 서식 및 표본 문서
과정 자료
수업 준비
문서가 이용 가능합니다. 모든 과정에 대해 보드별 노트, 평가 및 상호작용형 과거 문제집 연습이 제공되지는 않습니다.
수업 →