본문 바로가기

AQA · A-Level

수학

이 과정의 문제지, 표본 및 커리큘럼 문서입니다.

← 시험

자격 인증 코드: 7357

최근 과거문제

25 문제지 및 채점 기준 쌍

문제지와 채점 기준 보기 →

핸드아웃, 연습지 및 슬라이드

공유된 주제 문서는 출처 과정 및 주제 제목을 유지합니다. 선택한 보드의 규정을 사용하여 커버리지, tiers 및 고사 요건을 적용하십시오.

교재 자료 · AQA · A-Level · Mathematics (19)
프레젠테이션 슬라이드 · AQA · A-Level · Mathematics (19)
교재 자료 · A-Level 수학 (6)
연습지 · A-Level 수학 (38)
프레젠테이션 슬라이드 · A-Level 수학 (6)
연습 walkthrough 슬라이드 · A-Level 수학 (76)

과정 단위 및 학습 목표

이 수업은 선택된 과정 목표를 다룹니다. 나머지 미달성 항목을 확인하십시오. 이 자료는 완전한 준비 프로그램이 아닙니다.

A · 증명
  • Deduction, contradiction and induction: A single valid case that disproves a universal claim.
  • Complete cases and counterexamples: A proof that checks every possibility in a finite, complete set of cases.
  • Irrational roots and infinitely many primes: A proof that assumes the negation of a claim and derives an impossibility.
반례
보편적 주장을 반증하는 효한 사례 하나.
소거법 증명
유한하고 완전한 사례 집합의 모든 가능성을 확인하는 증명.
모순에 의한 증명
주장의 부정을 가정하여 모순을 도출하는 증명.
B · 대수 및 함수
  • Indices, surds and standard form: The power to which a base is raised.
  • Quadratics and inequalities: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.
  • Domains, inverses and composition: The set of allowed inputs to a function.
  • Polynomial division, remainders and factors: The statement that x−a is a factor of polynomial P(x) exactly when P(a)=0.
  • Algebraic fractions and excluded values: An input for which an original denominator or divisor is zero.
  • Partial fractions with distinct linear factors: A simpler fraction in a sum that equals a rational expression on its original domain.
  • Repeated linear factors in partial fractions: A denominator factor occurring more than once, requiring a term for each power.
  • Linear and quadratic simultaneous equations: An ordered pair that satisfies every equation in a system at the same time.
  • Rational indices and real domains: An exponent written as a fraction of integers.
  • Surds and conjugate denominators: A paired expression with the sign between two terms reversed.
  • Completing the square and quadratic structure: A quadratic written as a multiple of a squared bracket plus a constant.
  • Equations quadratic in another expression: Replacing a repeated expression with a new variable to reveal a simpler equation.
  • Inequalities, fractions and solution sets: The values common to two solution sets, corresponding to AND.
  • Regions between linear and quadratic boundaries: The line or curve separating points that satisfy an inequality from those that do not.
  • Modulus graphs and piecewise solutions: The nonnegative distance of a real number from zero.
  • Reciprocal graphs and asymptotes: A line that a curve approaches in a limiting direction.
  • Inverse graphs and restricted branches: A function for which different inputs always give different outputs.
  • Composite functions and intermediate domains: Applying one function to the output of another, in a specified order.
  • Combined graph transformations and order: The factor multiplying the original horizontal coordinates when a graph is stretched or compressed.
  • Fitting and refining a function model: An observed output minus the output predicted by a model.
  • Polynomial sketches, repeated roots and signs: The number of times a root’s linear factor appears in a polynomial.
색인
밑수가 취하는 지수.
판별식
ax²+bx+c=0의 실근을 결정하는 양 b²-4ac
정의역
함수에 주입할 수 있는 허용된 입력값의 집합.
인수 정리
P(a)=0일 때만 x−a가 다항식 P(x)의 인자임을 나타내는 명제
제외 값
원분모나 나눗셈의 제로가 되는 입력값
부분분수
원래 정의역에서 유리식과 등가인 합에 포함된 더 간단한 분수.
중인수
두 번 이상 나타나는 분모의 인자로, 각 지수에 대해 항이 필요함
연립해
연립방정식의 모든 방정식을 동시에 만족하는 순서쌍
유지 지수
정수의 분수로 쓰인 지수
상쇄 산/염기
두 항 사이의 부호가 반전된 쌍을 이룬 식
완전제곱식
제곱 괄호의 배수에 상수를 더한 형태로 쓰인 이차식.
치환(substitution)
반복되는 식을 새로운 변수로 치환하여 더 간단한 방정식을 드러냄
교차점
두 해 집합에 공통인 값으로, AND(논리 합)에 해당함.
boundary
부등식을 만족하는 점과 그렇지 않은 점을 구분하는 직선 또는 곡선.
절댓값(모듈러스)
실수에서 0까지의 비음의 거리.
점근선
곡선이 극한 방향을 향해 접근하는 직선.
일대일 대응일 때
서로 다른 입력값이 항상 서로 다른 출력값을 주는 함수.
구도
지정된 순서에 따라 한 함수를 다른 함수의 출력값에 적용하는 것.
수평 확장 인자
그래프가 신축되거나 압축될 때 원래 수평 좌표에 곱해지는 인자.
잔차
관측된 출력값에서 모델이 예측한 출력값을 뺀 값.
중복도(multiplicity)
다항식에서 근의 선형 인자가 나타나는 횟수.
C · 좌표 기하학
  • Coordinate geometry and tangents: The change in y divided by the corresponding change in x.
  • Parametric curves, domains and direction: A variable that determines both coordinates of a point.
  • Parametric modelling in motion and design: A model expressing two quantities using a common variable and stated assumptions.
  • General-form lines and contextual models: The form ax+by+c=0 for a straight line, with a and b not both zero.
  • Shifted circles, chords and tangents: The point at equal distance from every point on a circle.
기울기
y의 변화량을 해당 x의 변화량으로 나눈 값
파라미터
점의 두 좌정을 결정하는 변수.
매개변수 모델
공통 변수와 명시된 가정을 사용하여 두 양을 표현하는 모델.
일반형
a와 b가 모두 0이 아닌 직선의 방정식 ax+by+c=0.
무게 중심
원 위의 모든 점에서 등거리인 점.
D · 수열과 급수
  • Sequences, series and recurrence: The constant multiplier between consecutive terms of a geometric sequence.
  • Binomial expansion and valid approximations: The number of ways to choose a specified number of objects from a set.
  • Factorials, combinations and binomial coefficients: A selection in which order does not distinguish different choices.
  • Increasing, decreasing and periodic recurrences: A sequence whose terms repeat after a fixed positive number of steps.
  • Sigma notation, indices and changed limits: The variable that takes each integer value between a sum’s stated limits.
  • Arithmetic series and inverse problems: The fixed amount added to each term to obtain the next.
  • Geometric sums, alternating ratios and convergence: The fixed factor multiplying each term to obtain the next.
  • Repeated-deposit sequence models and timing: An amount added to an account at a stated time.
common ratio(등비)
다음 항을 얻기 위해 각 항에 고정적으로 곱하는 인자.
이항 계수
집합에서 특정 수의 물체를 선택하는 방법의 수.
조합
순서가 다른 선택을 구분하지 않는 조합.
주기적 수열
고정된 양의 단계 후 항이 반복되는 순서.
합산 인덱스
급수의 지정된 경계 사이에서 모든 정수 값을 취하는 변수.
common difference(등차)
다음 항을 얻기 위해 각 항에 고정적으로 더하는 양.
Deposit
지정된 시점에 계좌에 추가되는 금액.
E · 삼각함수
  • Right triangles and non-right triangles: The side opposite the right angle in a right-angled triangle.
  • Radians, identities and trigonometric equations: The angle subtended by an arc whose length equals the radius.
  • Radian measure, arcs, sectors and segments: The region bounded by two radii and their circular arc.
  • Small-angle approximations and their limits: A nearby simpler value used with a stated accuracy limit.
  • All-angle definitions, exact values and periodic graphs: The circle of radius one centred at the coordinate origin.
  • Reciprocal trigonometric functions and excluded angles: The reciprocal of cosine wherever cosine is nonzero.
  • Inverse trigonometric branches and principal values: The single inverse output chosen from a stated restricted interval.
  • Reciprocal identities and one-sided proof chains: An equality true for every input in its stated common domain.
  • Compound-angle formulae and geometric proofs: An angle expressed as the sum or difference of two angles.
  • Double-angle identities, quadrant signs and squared forms: An angle equal to twice the original angle.
  • Auxiliary-angle forms, ranges and interval solutions: The nonnegative size of an oscillation about its centre line.
  • Quadratic trigonometric equations and complete root sets: A possible solution that still needs checking in the original equation and interval.
  • Multiple-angle equations and transformed intervals: The interval for a substituted angle after applying the same input change to its endpoints.
  • Trigonometric components and motion models: The signed projection of a vector along a chosen coordinate direction.
  • Sine rule, cosine rule and triangle area: The angle between the two named sides.
  • The ambiguous sine-rule case and valid triangle counts: Given triangle data that can produce two different valid triangles.
  • Key-point sketches and transformed tangent domains: A line approached by a graph while its values grow without bound or tend toward a limit.
기하변
직각삼각형에서 직각과 맞닿은 변의 대변인 변.
라디안
호의 길이가 반지름과 같을 때 호가 이루는 각도이다.
부문
두 반지름과 그 원호로 둘러싸인 영역.
근사(approximation)
명시된 정밀도 한계를 사용하여 사용하는 더 Nearby한 단순한 값.
단원
좌표 원점을 중심으로 하는 반지름 1인 원.
할선
코사인이 제로가 아닌 지점에서의 역함수인 세크란트
주 값(principal value)
명시된 제한 구간에서 선택된 단일 역함수 출력값.
정체성
명시된 공통 정의역 내 모든 입력에 대해 참인 등식.
합각공식
두 각도의 합 또는 차이로 표현된 각도.
이중 각
원래 각도의 두 배와 같은 각도.
진폭
중심선을 기준으로 진동하는 크기의 비음수 값.
후보자
원본 방정식 및 구간에서 여전히 검증이 필요한 가능한 해.
변환된 구간
양 끝점에 동일한 입력 변경을 적용한 후 치환된 각도에 대한 구간.
성분(component)
선택한 좌표축 방향에서의 벡터의 부호 있는 투영.
포함 각
두 tên된 변 사이의 각도.
모호한 경우
두 가지 다른 유효한 삼각형을 생성할 수 있는 삼각형 데이터.
점근선
값이 무한히 커지거나 특정 한계값으로 수렴하면서 그래프가 접근하는 직선.
F · 지수함수와 로그
  • Exponentials, logarithms and modelling: The time for a decaying quantity to fall to half its initial value.
  • Exponential graphs and logarithmic inverses: The exponent to which a stated valid base must be raised to produce a positive input.
  • Logarithm laws, negative powers and equation domains: The input inside a logarithm, which must be positive for a real logarithm.
  • Logarithmic graphs for power and exponential fits: The transformed vertical value when the chosen horizontal variable is zero.
  • Proportional rates, half-life and model limits: A rate of change equal to a constant multiplied by the current amount.
반감기
감소하는 양이 초기 값의 절반으로 떨어지는 데 걸리는 시간.
로그
양수 입력을 생성하기 위해 지정된 유효한 밑이 취해져야 하는 지수.
인자(argument)
로그함수 내부의 입력으로, 실수 로그를 위해서는 양수여야 함.
절편(intercept)
선택한 수평 변수가 0일 때 변환된 수직 값.
비례율
현재 양에 상수를 곱한 값과 동일한 변화율.
G · 미분
  • Derivatives and stationary points: The instantaneous rate of change, also the gradient of a tangent.
  • Chain, product, quotient and implicit differentiation: The rule that multiplies the outer derivative by the inner derivative for a composite function.
  • Secants, limits and first-principles power derivatives: The change in function output divided by a nonzero change in input.
  • First-principles sine and cosine derivatives: A small-angle limit used with angles measured in radians.
  • Gradient graphs, concavity and inflection tests: A point where a continuous curve changes its direction of concavity.
  • Rational-power derivatives and valid domains: An exponent that can be written as a fraction of integers, interpreted with a valid real root.
  • Exponential, logarithmic and trigonometric derivatives: The derivative of the changing input inside a composite function.
  • Product and quotient rules with retained exclusions: The rule for differentiating a ratio of two changing functions when the denominator is nonzero.
  • Chain rules for nested functions and restricted inputs: The outer derivative evaluated at the inner output, multiplied by the derivative of that inner input.
  • Inverse derivatives at corresponding points: The rate of the inverse output with respect to its input, evaluated at the corresponding original point.
  • Connected rates, geometry and time units: Rates linked by a relationship between quantities changing with the same time variable.
  • Implicit first derivatives and tangent domains: An equation relating x and y without isolating one as an explicit function of the other.
  • Parametric first derivatives and vertical tangents: The ratio of the y-rate to the x-rate along a parametrised curve, when the x-rate is nonzero.
  • Tangent and normal equations and gradient conditions: A line through the curve point perpendicular to its local tangent.
  • Optimisation with constraints, boundaries and rejected roots: The allowed input values after the original physical or mathematical constraints are applied.
  • Constructing differential equations from rate laws: A relationship involving an unknown function and one or more of its derivatives.
미분Unless derivative.
순간 변화율이며, 동시에 접선의 기울기도 의미함.
연쇄 법칙
합성 함수에 대해 외부 미분값을 내부 미분값에 하는 규칙.
차분 비
함수 출력의 변화량을 비영의 입력 변화량으로 나눈 값.
라디안 한계
라디안 단위로 측정된 각도에서 사용되는 소각도 근사.
변곡점
연속 곡선이 오목 방향을 바꾸는 점.
유계 지수
정수의 분수로 표현할 수 있으며 유효한 실수근으로 해석되는 지수.
내부 변화율
합성함수 내부의 변하는 입력에 대한 미분계수.
비율의 법칙
The rule for differentiating a ratio of two changing functions when the denominator is nonzero.
합성 미분
내부 출력에서 평가된 외부 미분계수를 해당 내부 입력의 미분계수에 곱한 값.
역함수 미분
상응하는 원래 점에서 평가된 역출력에 대한 입력에 대한 변화율.
연관 변화율
같은 시간 변수에 따라 변하는 양 사이의 관계로 연결된 변화율.
은밀한 관계식
하나를 다른 하나의 명시적 함수로 분리하지 않고 x와 y를 관련시키는 방정식.
매개변수 기울기
The ratio of the y-rate to the x-rate along a parametrised curve, when the x-rate is nonzero.
보통선
곡선 위의 점을 지나고 국소 접선에 수직인 직선.
실행 가능 영역
원래 물리적 또는 수학적 제약을 적용한 후 허용되는 입력 값.
미분 방정식
미지수 함수와 그 미분계수 중 하나 이상을 포함하는 관계.
H · 적분(integration)
  • Integrals, area and accumulation: A function whose derivative equals the given integrand.
  • Substitution, parts and partial fractions: An integration method based on the derivative of a product.
  • Differential equations and numerical solutions: A specified value that selects a particular solution from a family.
  • The Fundamental Theorem and accumulated change: A function whose value is the signed integral from a fixed starting point to a variable endpoint.
  • Integration as the limit of rectangle sums: A sum of signed rectangle contributions that approaches an integral as the partition becomes finer.
  • Elementary antiderivatives, coefficients and domains: A function whose derivative is the specified integrand on the stated interval.
부정적미분
지정된 구간에서 주어진 피적분함수의 미분계수가 되는 함수.
부분적분법
곱의 미분값에 기반한 적분 기법.
초기 조건
특정한 해를 선별하기 위한 지정된 값.
적분 함수
고정된 시작점에서 가변적 끝점까지의 부호 있는 적분값이 되는 함수.
리만 합
분할이 세밀해질수록 적분에 수렴하는 부호 있는 사각형 기여치의 합.
I · 수치 해석법
  • Root finding and numerical integration: A repeated update in which each new approximation is calculated from the previous one.
반복(iteration)
이전 근사값을 기반으로 다음 근사값을 계산하는 반복적인 업데이트 과정.
J · 벡터
  • Vectors and transformation geometry: The vector sum representing the combined displacement or force.
  • Reflections, rotations and enlargements: The point from which each point's displacement is multiplied by a scale factor.
합성
합성 변위나 합력을 나타내는 벡터의 합.
확장 중심점
모든 점의 변위에 확대 배율을 적용하는 기준점.
K · 통계적 표본 추출
  • Sampling and a large data set: The list or population definition from which a sample is selected.
표본 프레임
표본이 선택되는 목록이나 모집단 정의.
L · 데이터 표현 및 해석
  • Data summaries, histograms and interpretation: Frequency divided by class width, used as histogram height.
  • Regression, financial models and residuals: The observed value minus the value predicted by a fitted model.
빈도 밀도
히스토그램의 높이에 사용되는 빈도를 구간 너비로 나눈 값.
잔차
관측값에서 적합된 모델이 예측한 값을 뺀 값
M · 확률
  • Probability, trees and conditional reasoning: The probability of an event after restricting the sample space to a stated condition.
조건부 확률
표본공간을 특정 조건으로 제한한 후 어떤 사건이 발생할 확률.
N · 통계 분포
  • Binomial, normal and Poisson models: The probability-weighted mean of a random variable.
기대값
확률 가중 평균인 무작위 변수의 기대값.
O · 통계적 가설 검정
  • Hypothesis testing and contextual conclusions: The chosen probability threshold for rejecting a null hypothesis.
유의 수준
귀무가설을 기각하기 위해 선택한 확률 임계값.
P · 역학에서의 양과 단위
  • Accuracy, bounds and compound measures: The smallest possible value consistent with a stated rounding rule.
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
하한
명시된 반올림 규칙과 일치하는 가장 작은 값.
합성력
모델링된 물체에 작용하는 모든 외부 힘의 벡터 합.
Q · 운동학
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
  • Integrals, area and accumulation: A function whose derivative equals the given integrand.
합성력
모델링된 물체에 작용하는 모든 외부 힘의 벡터 합.
부정적미분
주어진 피적분함수의 미분값이 해당 함수가 되는 원함수.
R · 힘과 뉴턴의 법칙
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
합성력
모델링된 물체에 작용하는 모든 외부 힘의 벡터 합.
S · 모멘트
  • Moments, equilibrium and centres of mass: Force multiplied by the perpendicular distance from its line of action to a pivot.
시간점
힘의 작용선에서 받침점까지의 수직 거리에 힘을 곱한 값.

해당 자격증 대비

  • Paper 1 covers A–I. Paper 2 adds J and P–S to Paper 1 content. Paper 3 adds K–O to Paper 1 content.
  • All students study pure, mechanics and statistics. Use the AQA large data set and the 7357 formula booklet.
  • Calculators need statistical distribution functions; symbolic algebra/differentiation/integration facilities are prohibited under the examination rules.

여전히 필요한 교육 범위

  • Official question-bank boundaries, scheme alignment and all objective-level teaching coverage require the recorded review; no practice registry promotion.
  • The authored diagnostic assessments are not full-length qualification mocks.

규격 서식 및 표본 문서

과정 자료

수업 준비

문서가 이용 가능합니다. 모든 과정에 대해 보드별 노트, 평가 및 상호작용형 과거 문제집 연습이 제공되지는 않습니다.

수업 →

로그인 또는 계정 만들기

IGCSE, A-Level & AP