コンテンツへスキップ

国際バカロレア · IB Diploma

Chemistry · HL

このコースのための試験問題、サンプル、カリキュラム資料。

← 試験

プリント、練習用紙、スライド

共有されたトピック文書は元のコースおよびトピックタイトルを保持します。指定した Examination Board のカリキュラム仕様に基づき、範囲、レベル、試験要件を確認してください。

プリント資料 · 国際バカロレア · IB Diploma · Chemistry · HL (23)
演習シート · 国際バカロレア · IB Diploma · Chemistry · HL (23)
プレゼンテーションスライド · 国際バカロレア · IB Diploma · Chemistry · HL (23)
Exercise ウォークスルーのスライド · 国際バカロレア · IB Diploma · Chemistry · HL (12)
ティーチングガイド · 国際バカロレア · IB Diploma · Chemistry · HL (1)
プリント資料 · A-Level Chemistry (37)
演習シート · A-Level Chemistry (90)
プレゼンテーションスライド · A-Level Chemistry (37)
Exercise ウォークスルーのスライド · A-Level Chemistry (165)

コース単元と学習目標

これらのレッスンは特定のコース目標に焦点を当てています。残りのカバー範囲のギャップを確認してください。この教材は完全な準備プログラムではありません。

Structure 1.1 · 物質の粒子性への入門
  • Temperature on the kelvin scale.
  • At fixed amount and volume, pressure is proportional to kelvin temperature. At fixed temperature and amount, pressure is inversely proportional to volume. State which quantities are fixed before choosing a relationship.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
絶対温度
ケルビンスケール上の温度
理想ガス
特定の簡略化仮定を持つ気体モデル
Structure 1.2 · 原子核モデル
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
イオン結合
反対電荷を持つイオンの間の引力
非局在電子
単一の原子や結合に限定されない電子
Structure 1.3 · 電子配置
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
イオン結合
反対電荷を持つイオンの間の引力
非局在電子
単一の原子や結合に限定されない電子
Structure 1.4 · 質量による粒子数のカウント:モル
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
モル
物質の量のSI単位
限界試薬
生成物の最大量を制限する反応物
Structure 1.5 · 理想気体
  • Temperature on the kelvin scale.
  • At fixed amount and volume, pressure is proportional to kelvin temperature. At fixed temperature and amount, pressure is inversely proportional to volume. State which quantities are fixed before choosing a relationship.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
絶対温度
ケルビンスケール上の温度
理想ガス
特定の簡略化仮定を持つ気体モデル
Structure 2.1 · イオンモデル
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
イオン結合
反対電荷を持つイオンの間の引力
非局在電子
単一の原子や結合に限定されない電子
Structure 2.2 · 共有結合モデル
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
イオン結合
反対電荷を持つイオンの間の引力
非局在電子
単一の原子や結合に限定されない電子
Structure 2.3 · 金属結合モデル
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
イオン結合
反対電荷を持つイオンの間の引力
非局在電子
単一の原子や結合に限定されない電子
Structure 2.4 · モデルから材料へ
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
イオン結合
反対電荷を持つイオンの間の引力
非局在電子
単一の原子や結合に限定されない電子
Structure 3.1 · 周期表:元素の分類
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
イオン結合
反対電荷を持つイオンの間の引力
非局在電子
単一の原子や結合に限定されない電子
Structure 3.2 · 官能基:有機化合物の分類
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
官能基
特徴的な反応を決定する原子の集団
異性体
同じ分子式を持つが構造が異なる化合物
Reactivity 1.1 · エンタルピー変化の測定
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
発熱反応
エネルギーを周囲へ移転すること
エンタルピー変化
特定の過程における定圧での熱変化
Reactivity 1.2 · 反応におけるエネルギーサイクル
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
発熱反応
エネルギーを周囲へ移転すること
エンタルピー変化
特定の過程における定圧での熱変化
Reactivity 1.3 · 燃料からのエネルギー
  • Assessment across production, use and disposal.
  • Define the functional unit before comparing products. The same delivered service, such as carrying one litre of water a hundred times, is fairer than comparing one object with another regardless of lifetime.
  • List system boundaries, energy sources and assumptions. Compare water demand, emissions and waste separately before making a judgement. Explain whose priorities affect the decision and where the data are uncertain.
ライフサイクル評価
生産、使用、廃棄にわたる評価
機能単位
公平な比較に用いられる共通サービス
Reactivity 1.4 · エントロピーと自発性
  • A state property related to energy dispersal and accessible arrangements.
  • Use ΔG = ΔH - TΔS with consistent energy units. A negative Gibbs energy change indicates thermodynamic favourability for the stated conditions, not a fast rate. An activation barrier can make a favourable process slow.
  • State whether values are standard-state quantities and record temperature in kelvin. Convert entropy from joules per kelvin per mole into kilojoules per kelvin per mole when enthalpy is in kilojoules per mole.
エントロピー
エネルギーの拡散と利用可能な配置に関連する状態量
ギブズ自由エネルギー
エンタルピーとエントロピーの影響を併せ持った熱力学的 quantity
Reactivity 2.1 · 量的は?化学変化の量
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
モル
物質の量のSI単位
限界試薬
生成物の最大量を制限する反応物
ティター
二つのビュレット読値間の放出体積
当量点
化学量論的に反応が完了する点
Reactivity 2.2 · 速さは?化学変化の速度
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
活性化エネルギー
反応経路に対するエネルギー障壁
速度
単位時間あたりの測定量の増加または減少
Reactivity 2.3 · 深さは?化学変化の進行度合
  • A state with equal forward and reverse reaction rates.
  • A concentration or pressure change disturbs the balance. The system responds toward a new equilibrium. Temperature changes can also change the equilibrium constant; a catalyst changes how quickly equilibrium is reached.
  • State the balanced equation and whether the forward reaction is exothermic before predicting a temperature effect. Count gas coefficients when considering pressure; pressure has no composition effect when gaseous amounts are equal on both sides.
平衡
正反応と逆反応の速度が等しい状態
可逆反応
両方向に進行できる反応
Reactivity 3.1 · プロトン移動反応
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
ティター
二つのビュレット読値間の放出体積
当量点
化学量論的に反応が完了する点
Reactivity 3.2 · 電子移動反応
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
酸化反応
電子の失い(酸化)
還元
電子の受け取り(還元)
Reactivity 3.3 · 電子共有反応
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
官能基
特徴的な反応を決定する原子の集団
異性体
同じ分子式を持つが構造が異なる化合物
Reactivity 3.4 · 電子対共有反応
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
官能基
特徴的な反応を決定する原子の集団
異性体
同じ分子式を持つが構造が異なる化合物
Practical · 実験プログラム
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
不確実性
測定結果に対する定量化された限界
系誤差
一貫性のある計測バイアス

資格試験への準備

  • Structure and reactivity replace the old topic/option model. Entropy and spontaneity is AHL; all other topics still require exact SL/AHL statement separation from the guide.
  • Paper 1A MCQ + 1B experimental/data work, Paper 2 short/extended responses; SL 1.5/1.5 h, HL 2/2.5 h; weights 36%/44%. Scientific investigation 20%, 3,000 words.
  • Practical work 40 h plus collaborative sciences project 10 h and investigation 10 h; use the current chemistry data booklet.

指導範囲がまだ不足しています

  • Full 2025 SL/AHL understanding and guidance statements are not established by the brief. Focus cases do not cover complete bonding, acid-base, mechanism or spectroscopy objectives.
  • Full experimental-technique objectives and current data booklet need acquisition.

仕様書とサンプル資料

コース教材

コース準備

利用可能な資料があります。board 固有のメモ、評価、および対話型過去問練習は、すべてのコースで利用可能ではありません。

レッスン →

ログインまたはアカウント作成

IGCSE, A-Level & AP