コンテンツへスキップ

Pearson Edexcel · International A-Level

物理学

このコースのための試験問題、サンプル、カリキュラム資料。

← 試験

資格コード: XPH11 / YPH11

最近の過去問

78 過去問とマーク scheme のペア

試験問題とマークschemeを閲覧する →

プリント、練習用紙、スライド

共有されたトピック文書は元のコースおよびトピックタイトルを保持します。指定した Examination Board のカリキュラム仕様に基づき、範囲、レベル、試験要件を確認してください。

プリント資料 · Pearson Edexcel · International A-Level · Physics (6)
演習シート · Pearson Edexcel · International A-Level · Physics (38)
プレゼンテーションスライド · Pearson Edexcel · International A-Level · Physics (6)
Exercise ウォークスルーのスライド · Pearson Edexcel · International A-Level · Physics (69)
ティーチングガイド · Pearson Edexcel · International A-Level · Physics (1)
プリント資料 · A-Level Physics (25)
演習シート · A-Level Physics (106)
プレゼンテーションスライド · A-Level Physics (25)
Exercise ウォークスルーのスライド · A-Level Physics (202)

コース単元と学習目標

これらのレッスンは特定のコース目標に焦点を当てています。残りのカバー範囲のギャップを確認してください。この教材は完全な準備プログラムではありません。

1 · 力学および材料
  • Rate of change of displacement.
  • The gradient of a displacement-time graph is velocity. The area under a velocity-time graph gives displacement. A constant-acceleration formula is valid only when its assumption is justified.
  • Choose a positive direction and state it. Use a light gate or video with a known scale and frame interval for repeatable motion measurements. Avoid assuming hand timing is exact over very short intervals.
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
  • Energy transferred per unit time.
  • Define the system and useful output before calculating efficiency. Doubling speed quadruples kinetic energy at constant mass. Power describes transfer per time, not total energy.
  • Measure a lifting height and load, time the lift, and record electrical input with suitable instruments. Repeat trials and account for heating or friction as transfers, not missing energy.
速度
変位の変化率
加速度
速度の変化率
運動量
質量に速度を乗じたもの
合力
物体に働く力のベクトル和
電力
単位時間あたりに移動するエネルギー
効率
有効出力 ÷ 全入力量
2 · 波動と電気回路
  • Distance between successive points in phase.
  • At a boundary, frequency stays fixed by the source. A change of speed changes wavelength. Refraction follows from speed differences; angles are measured from the normal.
  • Measure several wavelengths and divide to reduce fractional reading uncertainty. Use a ray box with a normal drawn at the boundary. Keep the beam away from eyes and record incident and refracted angles clearly.
  • Rate of flow of charge.
  • Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
  • Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
  • A quantum of electromagnetic radiation.
  • Use photon energy = Planck constant × frequency. Maximum kinetic energy = photon energy - work function. Increasing intensity at fixed frequency increases photon arrival rate, not individual photon energy.
  • Read axes carefully on a stopping-potential or kinetic-energy graph. Identify threshold frequency from the zero-energy intercept. State the metal and experimental conditions because work function is material-specific.
波長
位相が連続する点間の距離
振動数
単位時間あたりの振動回数
電流
電荷の流量
電位差
単位電荷あたりに伝達されるエネルギー
光子
電磁放射の量子
仕事関数
電子を放出するために必要な最小表面エネルギー
3 · 物理実習I
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
不確実性
測定結果に対する定量化された限界
系誤差
一貫性のある計測バイアス
4 · 追加力学、場と粒子
  • Mass multiplied by velocity.
  • Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
  • Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
  • Creation of emf by changing flux linkage.
  • Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
  • Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
  • A description of gravitational force per unit mass.
  • For a point mass or outside a spherical mass, field strength follows an inverse-square distance dependence. Use distance from the centre, not height above the surface alone.
  • State the circular-orbit approximation and ignore atmospheric drag only when justified. Draw the force toward the central body and velocity tangential to the orbit. Do not add an outward force merely because the path is circular.
運動量
質量に速度を乗じたもの
合力
物体に働く力のベクトル和
インダクション
磁束結合量の変化による起電力の発生
トランスフォーマー
磁束の変化を通じてコイル間でエネルギーを伝達する装置
重力場
単位質量あたりの重力の力の記述
集束的文化力
曲線軌道中心 toward する合力(向心力)
5 · 熱力学、放射、振動および宇宙論
  • Energy per mass per temperature rise.
  • Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
  • Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
  • Temperature on the kelvin scale.
  • At fixed amount and volume, pressure is proportional to kelvin temperature. At fixed temperature and amount, pressure is inversely proportional to volume. State which quantities are fixed before choosing a relationship.
  • Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
  • Time for activity or undecayed population to halve.
  • Subtract background counts measured over the same time interval. Distinguish irradiation from contamination. Shielding, distance and reduced exposure time can reduce risk under a school-controlled procedure.
  • Use teacher-managed sources and the school radiation rules. Record count duration and repeat background measurements. Do not extrapolate a half-life from one nucleus or from uncorrected readings.
  • A large response to periodic forcing near a natural frequency.
  • Velocity is greatest near equilibrium for ideal SHM, while acceleration magnitude is greatest at extreme displacement. Resonance can occur near the natural frequency under periodic driving, with amplitude limited by damping.
  • Measure time for several complete oscillations and divide. Define a cycle consistently and use a small displacement when the model requires it. Keep pendulum paths clear and record damping effects rather than assuming perfect motion.
  • Total emitted power.
  • For isotropic emission without absorption, flux follows an inverse-square relationship with distance. Observed brightness alone therefore cannot establish luminosity.
  • Keep distance units consistent, identify which quantities are intrinsic to the star, and distinguish observational evidence from a model of stellar evolution. Do not confuse a red giant stage with every possible final remnant.
比熱容
質量あたりの温度上昇ごとのエネルギー
潜熱
状態変化に伴うエネルギー
絶対温度
ケルビンスケール上の温度
理想ガス
特定の簡略化仮定を持つ気体モデル
半減期
活動量または未崩壊個体数が半分になるまでの時間
背景放射線
調査対象の放射源とは別に測定された放射線
共振
固有振動数付近での周期的外力に対する大きな応答
減衰
振動系からのエネルギーの放出
光度
総放射出力
磁束
単位面積あたりに受領される功率
6 · 物理実習II
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
不確実性
測定結果に対する定量化された限界
系誤差
一貫性のある計測バイアス

資格試験への準備

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.
  • This package uses the 2018 specification, current for these assessments. Pearson announces first teaching of a redeveloped course from September 2027; do not mix its future content into the current Unit 1–6 route.

指導範囲がまだ不足しています

  • Full material stress/strain, fluid and mechanical statement coverage remains.
  • Full superposition, quantum wave evidence, resistivity/emf and network statements remain.
  • All AS core practicals and written graph/design objectives remain.
  • Circular motion, electric/magnetic field calculations, capacitors and particle physics remain.
  • Full thermodynamic/radiation/stellar objectives remain.
  • Full A2 practical design, transformations and uncertainty analysis remain.

仕様書とサンプル資料

コース教材

コース準備

利用可能な資料があります。board 固有のメモ、評価、および対話型過去問練習は、すべてのコースで利用可能ではありません。

レッスン →

ログインまたはアカウント作成

IGCSE, A-Level & AP