コンテンツへスキップ

Pearson Edexcel · International A-Level

化学

このコースのための試験問題、サンプル、カリキュラム資料。

← 試験

資格コード: XCH11 / YCH11

最近の過去問

77 過去問とマーク scheme のペア

試験問題とマークschemeを閲覧する →

プリント、練習用紙、スライド

共有されたトピック文書は元のコースおよびトピックタイトルを保持します。指定した Examination Board のカリキュラム仕様に基づき、範囲、レベル、試験要件を確認してください。

プリント資料 · Pearson Edexcel · International A-Level · Chemistry (6)
演習シート · Pearson Edexcel · International A-Level · Chemistry (73)
プレゼンテーションスライド · Pearson Edexcel · International A-Level · Chemistry (6)
Exercise ウォークスルーのスライド · Pearson Edexcel · International A-Level · Chemistry (93)
ティーチングガイド · Pearson Edexcel · International A-Level · Chemistry (1)
プリント資料 · A-Level Chemistry (37)
演習シート · A-Level Chemistry (90)
プレゼンテーションスライド · A-Level Chemistry (37)
Exercise ウォークスルーのスライド · A-Level Chemistry (165)

コース単元と学習目標

これらのレッスンは特定のコース目標に焦点を当てています。残りのカバー範囲のギャップを確認してください。この教材は完全な準備プログラムではありません。

1 · 構造、結合および有機化学への導入
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
モル
物質の量のSI単位
限界試薬
生成物の最大量を制限する反応物
イオン結合
反対電荷を持つイオンの間の引力
非局在電子
単一の原子や結合に限定されない電子
官能基
特徴的な反応を決定する原子の集団
異性体
同じ分子式を持つが構造が異なる化合物
2 · 熱力学、群族化学、ハロゲン化アルキルおよびアルコール
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
発熱反応
エネルギーを周囲へ移転すること
エンタルピー変化
特定の過程における定圧での熱変化
酸化反応
電子の失い(酸化)
還元
電子の受け取り(還元)
活性化エネルギー
反応経路に対するエネルギー障壁
速度
単位時間あたりの測定量の増加または減少
官能基
特徴的な反応を決定する原子の集団
異性体
同じ分子式を持つが構造が異なる化合物
3 · 化学における実習技能 I
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
ティター
二つのビュレット読値間の放出体積
当量点
化学量論的に反応が完了する点
クロマトグラフィー
2相を用いた分離法
Rf値
スポット距離 ÷ 溶媒前線距離
不確実性
測定結果に対する定量化された限界
系誤差
一貫性のある計測バイアス
4 · 反応速度、平衡および追加の有機化学
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • A state with equal forward and reverse reaction rates.
  • A concentration or pressure change disturbs the balance. The system responds toward a new equilibrium. Temperature changes can also change the equilibrium constant; a catalyst changes how quickly equilibrium is reached.
  • State the balanced equation and whether the forward reaction is exothermic before predicting a temperature effect. Count gas coefficients when considering pressure; pressure has no composition effect when gaseous amounts are equal on both sides.
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
活性化エネルギー
反応経路に対するエネルギー障壁
速度
単位時間あたりの測定量の増加または減少
平衡
正反応と逆反応の速度が等しい状態
可逆反応
両方向に進行できる反応
発熱反応
エネルギーを周囲へ移転すること
エンタルピー変化
特定の過程における定圧での熱変化
官能基
特徴的な反応を決定する原子の集団
異性体
同じ分子式を持つが構造が異なる化合物
5 · 遷移金属および有機窒素化学
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
酸化反応
電子の失い(酸化)
還元
電子の受け取り(還元)
官能基
特徴的な反応を決定する原子の集団
異性体
同じ分子式を持つが構造が異なる化合物
クロマトグラフィー
2相を用いた分離法
Rf値
スポット距離 ÷ 溶媒前線距離
6 · 化学実習II
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
ティター
二つのビュレット読値間の放出体積
当量点
化学量論的に反応が完了する点
不確実性
測定結果に対する定量化された限界
系誤差
一貫性のある計測バイアス

資格試験への準備

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.

指導範囲がまだ不足しています

  • Full topic 1–5 statement coverage remains.
  • Intermolecular forces, Groups 1/2/7, halogenoalkanes and alcohol chemistry remain.
  • All AS core practicals, preparation methods and practical-paper objectives remain.
  • Rate equations, entropy, acid-base equilibria, carbonyls/acids/chirality remain.
  • Transition-metal complexes, electrode potentials, organic nitrogen, synthesis and spectroscopy remain.
  • A2 synthesis, purification, quantitative analysis and practical-paper coverage remain.

仕様書とサンプル資料

コース教材

コース準備

利用可能な資料があります。board 固有のメモ、評価、および対話型過去問練習は、すべてのコースで利用可能ではありません。

レッスン →

ログインまたはアカウント作成

IGCSE, A-Level & AP