コンテンツへスキップ

AQA · A-Level

数学

このコースのための試験問題、サンプル、カリキュラム資料。

← 試験

資格コード: 7357

最近の過去問

25 過去問とマーク scheme のペア

試験問題とマークschemeを閲覧する →

プリント、練習用紙、スライド

共有されたトピック文書は元のコースおよびトピックタイトルを保持します。指定した Examination Board のカリキュラム仕様に基づき、範囲、レベル、試験要件を確認してください。

プリント資料 (19)
プレゼンテーションスライド (19)
プリント資料 · A-Level Mathematics (6)
演習シート · A-Level Mathematics (38)
プレゼンテーションスライド · A-Level Mathematics (6)
Exercise ウォークスルーのスライド · A-Level Mathematics (76)

コース単元と学習目標

これらのレッスンは特定のコース目標に焦点を当てています。残りのカバー範囲のギャップを確認してください。この教材は完全な準備プログラムではありません。

A · 証明
  • Deduction, contradiction and induction: A single valid case that disproves a universal claim.
  • Complete cases and counterexamples: A proof that checks every possibility in a finite, complete set of cases.
  • Irrational roots and infinitely many primes: A proof that assumes the negation of a claim and derives an impossibility.
反例
普遍的な主張を否定する単一の有効なケース。
全列挙による証明
有限かつ完全なケースのすべてを検証する証明。
背理法
ある命題の否定を仮定し、矛盾を導く証明。
B · 代数学と関数
  • Indices, surds and standard form: The power to which a base is raised.
  • Quadratics and inequalities: The quantity b²-4ac that determines the real roots of ax²+bx+c=0.
  • Domains, inverses and composition: The set of allowed inputs to a function.
  • Polynomial division, remainders and factors: The statement that x−a is a factor of polynomial P(x) exactly when P(a)=0.
  • Algebraic fractions and excluded values: An input for which an original denominator or divisor is zero.
  • Partial fractions with distinct linear factors: A simpler fraction in a sum that equals a rational expression on its original domain.
  • Repeated linear factors in partial fractions: A denominator factor occurring more than once, requiring a term for each power.
  • Linear and quadratic simultaneous equations: An ordered pair that satisfies every equation in a system at the same time.
  • Rational indices and real domains: An exponent written as a fraction of integers.
  • Surds and conjugate denominators: A paired expression with the sign between two terms reversed.
  • Completing the square and quadratic structure: A quadratic written as a multiple of a squared bracket plus a constant.
  • Equations quadratic in another expression: Replacing a repeated expression with a new variable to reveal a simpler equation.
  • Inequalities, fractions and solution sets: The values common to two solution sets, corresponding to AND.
  • Regions between linear and quadratic boundaries: The line or curve separating points that satisfy an inequality from those that do not.
  • Modulus graphs and piecewise solutions: The nonnegative distance of a real number from zero.
  • Reciprocal graphs and asymptotes: A line that a curve approaches in a limiting direction.
  • Inverse graphs and restricted branches: A function for which different inputs always give different outputs.
  • Composite functions and intermediate domains: Applying one function to the output of another, in a specified order.
  • Combined graph transformations and order: The factor multiplying the original horizontal coordinates when a graph is stretched or compressed.
  • Fitting and refining a function model: An observed output minus the output predicted by a model.
  • Polynomial sketches, repeated roots and signs: The number of times a root’s linear factor appears in a polynomial.
インデックス
底が何乗されているかを示す数。
判別式
ax²+bx+c=0の実根を決定する値 b²-4ac。
定義域
関数の許容される入力の集合(定義域)。
因数定理
x−a が多項式 P(x) の因数であるのは、P(a)=0 のときのみであるという命題。
除外値
元の分母または除数がゼロになる入力。
部分分数
元の定義域において有理式に等しくなる和における簡素な分数。
重複因数
複数のべき乗ごとに項が必要となる、分母の因数が複数回出現するもの。
連立方程式の解
連立方程式のすべての方程式を同時に満たす順序対。
有理指数
整数の分数として表された指数。
共役
二つの項の間の符号が逆になった対照的な式。
平方完成
定数项を加えた平方括弧の倍数として表された二次式。
置換反応
より単純な方程式を明らかにするために、繰り返される式を新しい変数に置き換えること。
交点
二つの解集合に共通する値で、「AND」に対応するもの。
境界線
不等式を満たす点と満たさない点を分離する直線または曲線。
絶対値
実数が零からの非負距離。
漸近線
極限方向において曲線に近づく直線。
一対一対応である
異なる入力に対して常に異なる出力を与える関数。
構成
指定された順序で、ある関数の出力にもう一つの関数を適用すること。
水平方向の拡大率
グラフが伸縮される際、元の水平座標に掛けられる因数。
残差
観測された出力からモデルによる予測値を引いたもの。
重数です。
ある根の一次因子が多項式に現れる回数。
C · 座標幾何学
  • Coordinate geometry and tangents: The change in y divided by the corresponding change in x.
  • Parametric curves, domains and direction: A variable that determines both coordinates of a point.
  • Parametric modelling in motion and design: A model expressing two quantities using a common variable and stated assumptions.
  • General-form lines and contextual models: The form ax+by+c=0 for a straight line, with a and b not both zero.
  • Shifted circles, chords and tangents: The point at equal distance from every point on a circle.
傾き
yの変化量を対応するxの変化量で割ったもの。
パラメータ
点の両方の座標を決定する変数。
パラメトリックモデル
共通の変数と明示された仮定を用いて2つの量を表すモデル。
一般形
直線の形 ax+by+c=0、ただし a と b が同時にゼロではない場合。
重心
円上のすべての点から等距離にある点。
D · 数列と級数
  • Sequences, series and recurrence: The constant multiplier between consecutive terms of a geometric sequence.
  • Binomial expansion and valid approximations: The number of ways to choose a specified number of objects from a set.
  • Factorials, combinations and binomial coefficients: A selection in which order does not distinguish different choices.
  • Increasing, decreasing and periodic recurrences: A sequence whose terms repeat after a fixed positive number of steps.
  • Sigma notation, indices and changed limits: The variable that takes each integer value between a sum’s stated limits.
  • Arithmetic series and inverse problems: The fixed amount added to each term to obtain the next.
  • Geometric sums, alternating ratios and convergence: The fixed factor multiplying each term to obtain the next.
  • Repeated-deposit sequence models and timing: An amount added to an account at a stated time.
共通比
次項を得るために各項に掛けられる固定因数。
二項係数
有限の集合から特定の数の物体を選ぶ組み合わせの数。
組み合わせ
順序が異なる選択を区別しない選出。
周期数列
一定の正のステップ数で項が繰り返される数列。
和の添え字
和の明示された限界の間にある各整数値を取る変数。
共通公差
次項を得るために各項に加えられる固定量。
預り金
指定された時刻に口座に加算される金額。
E · 三角関数
  • Right triangles and non-right triangles: The side opposite the right angle in a right-angled triangle.
  • Radians, identities and trigonometric equations: The angle subtended by an arc whose length equals the radius.
  • Radian measure, arcs, sectors and segments: The region bounded by two radii and their circular arc.
  • Small-angle approximations and their limits: A nearby simpler value used with a stated accuracy limit.
  • All-angle definitions, exact values and periodic graphs: The circle of radius one centred at the coordinate origin.
  • Reciprocal trigonometric functions and excluded angles: The reciprocal of cosine wherever cosine is nonzero.
  • Inverse trigonometric branches and principal values: The single inverse output chosen from a stated restricted interval.
  • Reciprocal identities and one-sided proof chains: An equality true for every input in its stated common domain.
  • Compound-angle formulae and geometric proofs: An angle expressed as the sum or difference of two angles.
  • Double-angle identities, quadrant signs and squared forms: An angle equal to twice the original angle.
  • Auxiliary-angle forms, ranges and interval solutions: The nonnegative size of an oscillation about its centre line.
  • Quadratic trigonometric equations and complete root sets: A possible solution that still needs checking in the original equation and interval.
  • Multiple-angle equations and transformed intervals: The interval for a substituted angle after applying the same input change to its endpoints.
  • Trigonometric components and motion models: The signed projection of a vector along a chosen coordinate direction.
  • Sine rule, cosine rule and triangle area: The angle between the two named sides.
  • The ambiguous sine-rule case and valid triangle counts: Given triangle data that can produce two different valid triangles.
  • Key-point sketches and transformed tangent domains: A line approached by a graph while its values grow without bound or tend toward a limit.
斜辺
直角三角形において直角に反対側にある辺。
ラジアン
弧の長さが半径に等しいときの中心角。
セクター
2つの半径とその円弧によって境界付けられた領域。
近似
指定された精度の限界付きで用いられる、近傍のより単純な値。
単位円
座標原点を中心とする半径1の円。
接弦
コサインがゼロでないすべての点におけるコサインの逆数。
主値
指定された制限区間から選ばれた単一の逆出力。
恒等式
指定された共通定義域内のすべての入力で成り立つ等式。
合成角
2つの角の和または差として表される角。
倍角
An angle equal to twice the original angle.
振幅
中心線からの振動の非負の大きさ(振幅)。
候補者
元の方程式と区間で検証が必要である可能性のある解。
変換区間
両端に同じ入力変換を適用した後の、代入された角のための区間。
成分
選択された座標軸方向に沿ったベクトルの符号付き投影。
挟角
2つの名付けられた辺の間の角。
曖昧な場合
2つの異なる有効な三角形を生み出せる三角形のデータ。
漸近線
値が無限大に増加するか極限に向かう際にグラフが近づく直線。
F · 指数関数と対数
  • Exponentials, logarithms and modelling: The time for a decaying quantity to fall to half its initial value.
  • Exponential graphs and logarithmic inverses: The exponent to which a stated valid base must be raised to produce a positive input.
  • Logarithm laws, negative powers and equation domains: The input inside a logarithm, which must be positive for a real logarithm.
  • Logarithmic graphs for power and exponential fits: The transformed vertical value when the chosen horizontal variable is zero.
  • Proportional rates, half-life and model limits: A rate of change equal to a constant multiplied by the current amount.
半減期
減少する量が初期値の半分になるまでの時間。
対数
正の入力を生成するために必要な有効底を乗算すべき指数。
引数
実対数には正でなければならない対数の中身の入力。
切片
選択された横軸変数がゼロのときの変換された縦軸値。
比例定数
現在の量に定数を掛けたものに等しい変化率。
G · 微分法
  • Derivatives and stationary points: The instantaneous rate of change, also the gradient of a tangent.
  • Chain, product, quotient and implicit differentiation: The rule that multiplies the outer derivative by the inner derivative for a composite function.
  • Secants, limits and first-principles power derivatives: The change in function output divided by a nonzero change in input.
  • First-principles sine and cosine derivatives: A small-angle limit used with angles measured in radians.
  • Gradient graphs, concavity and inflection tests: A point where a continuous curve changes its direction of concavity.
  • Rational-power derivatives and valid domains: An exponent that can be written as a fraction of integers, interpreted with a valid real root.
  • Exponential, logarithmic and trigonometric derivatives: The derivative of the changing input inside a composite function.
  • Product and quotient rules with retained exclusions: The rule for differentiating a ratio of two changing functions when the denominator is nonzero.
  • Chain rules for nested functions and restricted inputs: The outer derivative evaluated at the inner output, multiplied by the derivative of that inner input.
  • Inverse derivatives at corresponding points: The rate of the inverse output with respect to its input, evaluated at the corresponding original point.
  • Connected rates, geometry and time units: Rates linked by a relationship between quantities changing with the same time variable.
  • Implicit first derivatives and tangent domains: An equation relating x and y without isolating one as an explicit function of the other.
  • Parametric first derivatives and vertical tangents: The ratio of the y-rate to the x-rate along a parametrised curve, when the x-rate is nonzero.
  • Tangent and normal equations and gradient conditions: A line through the curve point perpendicular to its local tangent.
  • Optimisation with constraints, boundaries and rejected roots: The allowed input values after the original physical or mathematical constraints are applied.
  • Constructing differential equations from rate laws: A relationship involving an unknown function and one or more of its derivatives.
導関数
瞬時変化率であり、接線の傾きでもある。
連鎖の法則を用いる
合成関数において外側の微分を内側の微分で乗算する法則。
差商
関数の出力の変化量を、ゼロでない入力の変化量で割った値。
ラジアン限界
ラジアン単位で測定された角度に用いられる小角極限。
変曲点
連続な曲線が凹性の向きを変える点。
有理指数
整数の分数として表せる指数であり、有効な実根として解釈されるもの。
内包速度
合成関数における変化している入力式の微分。
商の法則を用いる
分母がゼロでないとき、2つの変化関数の商を微分する規則。
合成関数の微分
外側の微分を内側の出力値で評価し、その内側入力の微分と乗算した結果。
逆関数の微分
逆出力の入に対する率を、対応する元の点で評価した値。
関連する変化率
同じ時間変数に伴う量の変化間の関係によって結び付けられた率。
暗黙的関係式
片方を他方の明示的な関数として分離せずに、x と y を関連づける方程式。
パラメータ曲線の傾き
x の率がゼロでない場合、パラメータ曲線に沿った y の率と x の率の比。
法線
曲線上の点を通り、その局所的な接線に垂直な直線。
許容領域
元の物理的または数学的制約を適用した後の許容される入力値。
微分方程式
未知の関数とその導関数の一つ以上を含む関係式。
H · 積分
  • Integrals, area and accumulation: A function whose derivative equals the given integrand.
  • Substitution, parts and partial fractions: An integration method based on the derivative of a product.
  • Differential equations and numerical solutions: A specified value that selects a particular solution from a family.
  • The Fundamental Theorem and accumulated change: A function whose value is the signed integral from a fixed starting point to a variable endpoint.
  • Integration as the limit of rectangle sums: A sum of signed rectangle contributions that approaches an integral as the partition becomes finer.
  • Elementary antiderivatives, coefficients and domains: A function whose derivative is the specified integrand on the stated interval.
原始関数
指定された区間で指定された被積分関数の導関数となる関数。
部分積分法
積の導関数に基づく積分法。
初期条件
ある解の族から特定の解を選択するための指定された値。
蓄積関数
固定された始点から可変の終点までの符号付き積分の値を持つ関数。
リーマン和
分割が細かくなるにつれて積分に近づく、符号付き長方形寄与の和。
I · 数値計算法
  • Root finding and numerical integration: A repeated update in which each new approximation is calculated from the previous one.
反復処理
新しい近似値が前回の値に基づいて計算される反復的な更新。
J · ベクトル
  • Vectors and transformation geometry: The vector sum representing the combined displacement or force.
  • Reflections, rotations and enlargements: The point from which each point's displacement is multiplied by a scale factor.
合力
合成された変位や力を表すベクトルの和。
拡大縮小の中心
各点の変位に拡大率が掛けられる点。
K · 統計的サンプリング
  • Sampling and a large data set: The list or population definition from which a sample is selected.
標本枠
サンプルが選択されるためのリストや母集団の定義。
L · データの提示と解釈
  • Data summaries, histograms and interpretation: Frequency divided by class width, used as histogram height.
  • Regression, financial models and residuals: The observed value minus the value predicted by a fitted model.
頻度密度
ヒストグラムの高さに用いられる、頻度を組幅で割った値。
残差
観測値から適合モデルによる予測値を引いた値。
M · 確率
  • Probability, trees and conditional reasoning: The probability of an event after restricting the sample space to a stated condition.
条件付き確率
標本空間を与えられた条件に制限した後の事象の確率。
N · 統計的分布
  • Binomial, normal and Poisson models: The probability-weighted mean of a random variable.
期待値
確率重み付けされた平均であるランダム変数の期待値。
O · 統計的仮説検定
  • Hypothesis testing and contextual conclusions: The chosen probability threshold for rejecting a null hypothesis.
有意水準
帰無仮説を棄却するために選ばれる確率閾値。
P · 力学における量と単位
  • Accuracy, bounds and compound measures: The smallest possible value consistent with a stated rounding rule.
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
下限値
指定された四捨五入則に一致する最小の可能値。
合力
モデル化された物体に作用するすべての外力のベクトル和。
Q · 運動学
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
  • Integrals, area and accumulation: A function whose derivative equals the given integrand.
合力
モデル化された物体に作用するすべての外力のベクトル和。
原始関数
与えられた被積分式の微分がその関数になるもの。
R · 力とニュートンの法則
  • Kinematics and Newton's laws: The vector sum of all external forces acting on the modelled object.
合力
モデル化された物体に作用するすべての外力のベクトル和。
S · モーメント
  • Moments, equilibrium and centres of mass: Force multiplied by the perpendicular distance from its line of action to a pivot.
時点
力の作用線から支点までの垂直距離に力を掛けたもの。

資格試験への準備

  • Paper 1 covers A–I. Paper 2 adds J and P–S to Paper 1 content. Paper 3 adds K–O to Paper 1 content.
  • All students study pure, mechanics and statistics. Use the AQA large data set and the 7357 formula booklet.
  • Calculators need statistical distribution functions; symbolic algebra/differentiation/integration facilities are prohibited under the examination rules.

指導範囲がまだ不足しています

  • Official question-bank boundaries, scheme alignment and all objective-level teaching coverage require the recorded review; no practice registry promotion.
  • The authored diagnostic assessments are not full-length qualification mocks.

仕様書とサンプル資料

コース教材

コース準備

利用可能な資料があります。board 固有のメモ、評価、および対話型過去問練習は、すべてのコースで利用可能ではありません。

レッスン →

ログインまたはアカウント作成

IGCSE, A-Level & AP