דלג לתוכן

Pearson Edexcel · International A-Level

כימיה

מסמכים, דוגמאות וחומרי הוראה לקורס זה.

← מבחנים

קוד הסמכה: XCH11 / YCH11

מסמכי עבר אחרונים

77 זוגות מסמך ומפתח תשובות

דפוסים וטבלות ציון →

תפוצות, דפי תרגילים ושקפים

מסמכי נושא משותפים שומרים על כותרות הקורס והנושא המקוריים שלהם. השתמש במפרט של הוועדה שבחרת עבור כיסוי, רמה ומבחנים.

חומרי עזר (6)
דפי תרגילים (73)
מצגות (6)
מצגות הסבר של תרגילים (93)
מדריכי הוראה (1)
חומרי עזר · כימיה A-Level (37)
דפי תרגילים · כימיה A-Level (90)
מצגות · כימיה A-Level (37)
מצגות הסבר של תרגילים · כימיה A-Level (165)

יחידות קורס ומטרות למידה

שיעורים אלו מלמדים מטרה נבחרת מהקורס. בדקי את הפער in הכיסוי הנותר; החומר אינו תוכנית הכנה מלאה.

1 · מבנה, קשרים והקדמה לכימיה אורגנית
  • The SI unit of amount of substance.
  • Calculate the amount available for each reactant and divide by its coefficient. The smaller ratio limits the reaction. Use that reactant to calculate the maximum product before comparing actual yield.
  • Write the balanced equation first, include units in molar masses, then convert each given mass or solution volume into amount. Convert cubic centimetres to cubic decimetres before using concentration in moles per cubic decimetre.
  • Attraction between oppositely charged ions.
  • To explain a bulk property, name the structure, particles, forces and mobile charge carriers. Simple molecular substances can have strong covalent bonds inside molecules but weak attractions between molecules.
  • Compare substances using evidence such as melting point, conductivity when solid and molten, and solubility. One property rarely proves a structure; use a pattern of evidence.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
מול
היחידה הסטנדרטית (SI) לכמות חומר
גורם מגביל
התגובה המגבילה את כמות המוצר האפשרית
קשר יוני
משיכה בין יונים טעונים מטענים הפוכים
אלקטרון ממוקם-ללא
אלקטרון שאינו מוגבל לאחד האטומים או לקשר בודד
קבוצה פונקציונלית
קבוצת אטומים הקובעת תגובות אופייניות
איזומר
תרכובת משתפתת נוסחה אך שונה במבנה
2 · אנרגטיקה, כימיה קבוצתית, אלקיל-הלוגנים ואלכוהולים
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
אקסותרמי
העברת אנרגיה לסביבה
שינוי אנטלפיה
שינוי חום בלחץ קבוע לתהליך מסוים
חמצון
איבוד אלקטרונים
חיזור
רכישת אלקטרונים
אנרגיית השפעול
מכשול האנרגיה לערוץ תגובה
קצב
שינוי בכמות נמדדת ליחידת זמן
קבוצה פונקציונלית
קבוצת אטומים הקובעת תגובות אופייניות
איזומר
תרכובת משתפתת נוסחה אך שונה במבנה
3 · מיומנויות מעשיות בכימיה I
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
טריטר
הנפח שסופק בין שתי קריאות במ burette
נקודת שוויון
נקודת השלמת תגובה סטוכיומטרית
כרומטוגרפיה
הפרדה באמצעות שתי פאזות
Rf
מרחק כתם מחולק במרחק החזית הממיס
אי-ודאות
מגבלה כמותית בתוצאת מדידה
שגיאה שיטתית
טיית מדידה קבועה
4 · קצבים, איזונים וכימיה אורגנית נוספת
  • The energy barrier for a reaction pathway.
  • A product-time graph has a steeper gradient where rate is larger. A tangent estimates instantaneous rate; a secant gives average rate over an interval. The final plateau reflects the total collected product under the stated conditions.
  • For gas production, check apparatus for leaks, start timing consistently and record volume at regular intervals. Keep concentration, reactant amount and surface area controlled when changing temperature.
  • A state with equal forward and reverse reaction rates.
  • A concentration or pressure change disturbs the balance. The system responds toward a new equilibrium. Temperature changes can also change the equilibrium constant; a catalyst changes how quickly equilibrium is reached.
  • State the balanced equation and whether the forward reaction is exothermic before predicting a temperature effect. Count gas coefficients when considering pressure; pressure has no composition effect when gaseous amounts are equal on both sides.
  • Transferring energy to the surroundings.
  • Use energy transferred = mass × specific heat capacity × temperature change. Convert joules to kilojoules before dividing by reaction amount. An exothermic molar enthalpy change has a negative sign.
  • Use insulation and a lid, measure starting temperatures consistently, stir, and record a temperature-time series. Estimate the reaction temperature from an appropriate extrapolation rather than ignoring cooling during measurement.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
אנרגיית השפעול
מכשול האנרגיה לערוץ תגובה
קצב
שינוי בכמות נמדדת ליחידת זמן
איזון
מצב שבו קצבי התגובה ההפוכה והקדמית שווים
תגובה הפוכה
תגובה שיכולה להתרחש בשני הכיוונים
אקסותרמי
העברת אנרגיה לסביבה
שינוי אנטלפיה
שינוי חום בלחץ קבוע לתהליך מסוים
קבוצה פונקציונלית
קבוצת אטומים הקובעת תגובות אופייניות
איזומר
תרכובת משתפתת נוסחה אך שונה במבנה
5 · מתכות מעבר וכימיה אורגנית חנקנית
  • Loss of electrons.
  • Predict products using the specified electrolyte and electrode material. In an aqueous solution, hydrogen or oxygen may form because water-related species compete. Molten salts contain only the ions of the salt.
  • Use a low-voltage direct-current supply, approved electrodes, and the school risk assessment. Collect gases only by an approved method. Keep chlorine demonstrations teacher-controlled; do not ask students to generate hazardous gases independently.
  • An atom group determining characteristic reactions.
  • Distinguish addition, substitution, oxidation and polymerization by tracing bonds before and after reaction. Conditions and reagents belong to the reaction arrow; they are not interchangeable labels.
  • Draw displayed or structural formulae with the correct number of bonds at each carbon. Use a carbon count to check a proposed synthesis. At advanced level, track reagents and conditions through multistep routes.
  • Separation using two phases.
  • Rf is distance travelled by a component divided by distance travelled by the solvent front, both measured from the baseline. Compare under the same conditions; an Rf value alone does not establish identity across different solvents.
  • Use pencil for the baseline, keep spots above solvent level, mark the solvent front promptly, and run known references alongside unknowns. For ion tests, use clean equipment and separate aliquots to avoid carrying reagents into later tests.
חמצון
איבוד אלקטרונים
חיזור
רכישת אלקטרונים
קבוצה פונקציונלית
קבוצת אטומים הקובעת תגובות אופייניות
איזומר
תרכובת משתפתת נוסחה אך שונה במבנה
כרומטוגרפיה
הפרדה באמצעות שתי פאזות
Rf
מרחק כתם מחולק במרחק החזית הממיס
6 · מיומנויות מעשיות בכימיה II
  • The volume delivered between two burette readings.
  • Calculate the known amount first, apply the stoichiometric ratio, then divide by the unknown solution volume in cubic decimetres. Use concordant titres as required by the school method and report the accepted values.
  • Rinse the burette with its solution and the pipette with the solution it transfers. Rinse the flask with distilled water. Add titrant slowly near the endpoint, swirl, and read the meniscus at eye level. Use a white tile and appropriate eye protection.
  • A quantified limitation on a measured result.
  • For a product or quotient, adding fractional uncertainties is a common maximum-uncertainty approximation. For a difference, add absolute uncertainties. A nonzero intercept can reveal an offset or an incomplete model.
  • Show units on axes and choose a sensible scale. Plot uncertainty bars where justified, draw a best-fit line rather than joining every point, and estimate steepest and shallowest plausible gradients when the course method calls for them.
טריטר
הנפח שסופק בין שתי קריאות במ burette
נקודת שוויון
נקודת השלמת תגובה סטוכיומטרית
אי-ודאות
מגבלה כמותית בתוצאת מדידה
שגיאה שיטתית
טיית מדידה קבועה

התכונות לקראת הסמכה זו

  • Six separately assessed units; IAS uses Units 1–3, IAL uses Units 1–6.
  • Units 3 and 6 are written practical-skills examinations based on experimental experience; they are not a Cambridge hands-on practical paper.
  • Retain core-practical numbering from the acquired specification. Unit weights, marks and times are in the assessment evidence manifest.

כיסוי הוראה עדיין נדרש

  • Full topic 1–5 statement coverage remains.
  • Intermolecular forces, Groups 1/2/7, halogenoalkanes and alcohol chemistry remain.
  • All AS core practicals, preparation methods and practical-paper objectives remain.
  • Rate equations, entropy, acid-base equilibria, carbonyls/acids/chirality remain.
  • Transition-metal complexes, electrode potentials, organic nitrogen, synthesis and spectroscopy remain.
  • A2 synthesis, purification, quantitative analysis and practical-paper coverage remain.

תכניות לימוד ומסמכי דוגמה

חומרי קורס

הכנה לקורס

המסמכים זמינים. הערות ספציפיות לוועדה, מבחנים ותרגול אינטראקטיבי עם שאלוני עבר אינם זמינים עדיין לכל הקורסים.

שיעורים →

היכנס או צור חשבון

IGCSE, A-Level & AP